8:12 ILLUMINATION

The 8:12 ILLUMINATION corded tripod balloon light line includes three standard brightness levels: 26,000 lumens (MPN 200-LED-10), 56,000 lumens (MPN 400-LED-10), and 110,000 lumens (MPN 800-LED-10). All models operate on 110/230V AC and reach a maximum height of 9.8 feet. The 110,000-lumen model draws 800 W at 7 A. These figures represent maximum output; actual delivered light depends on mounting height and ambient conditions. The 56,000-lumen model is available with a blue/white frame. Each unit is a corded tripod balloon light with an IP65 rating for dust and water jet protection.

The IP65 rating on 8:12 ILLUMINATION corded tripod balloon lights indicates that the enclosure is dust-tight and protected against water jets from any direction. This makes the fixtures suitable for outdoor job sites, construction areas, and industrial environments where dust, rain, or hose-down cleaning may occur. The rating applies to the light fixture and its enclosure, not to the power supply or plug connections. Users should still protect electrical connections from standing water and follow local electrical codes for temporary power distribution. The IP65 rating is consistent across the 26,000 lm, 56,000 lm, and 110,000 lm models.

Yes. All 8:12 ILLUMINATION corded tripod balloon lights carry an IP65 rating, which means they are dust-tight and resistant to water jets. This allows operation in construction sites, industrial plants, and outdoor areas where dust or moisture is present. The balloon envelope is inflated for use and deflated for transport, so the light-emitting surface is protected when not in operation. However, the IP65 rating does not cover submersion or high-pressure steam cleaning. The electrical plug and any extension cords must be kept out of standing water and connected to a properly grounded supply. For continuous operation in heavy rain, additional shielding of the power inlet is recommended.

The 8:12 ILLUMINATION 800-LED-10 corded tripod balloon light reaches a maximum height of 9.8 feet when the telescoping tripod is fully extended. It operates on 110/230V AC and draws 800 W at 7 A. The light output is rated at 110,000 lumens maximum. The fixture carries an IP65 rating for dust and water jet protection. The 800-LED-10 is the highest-output model in the current 8:12 ILLUMINATION range. It is intended for large-area illumination where high lumen output is required, such as night-time construction or emergency response. The tripod and balloon assembly are integral to the unit and do not require separate ballast.

3G Electric supplies 8:12 ILLUMINATION corded tripod balloon lights as part of its industrial equipment catalog. Support includes global logistics, quotation for multiple SKUs, and part number cross-referencing. The available models include the 200-LED-10, 400-LED-10, and 800-LED-10, covering 26,000 lm, 56,000 lm, and 110,000 lm outputs. 3G Electric can provide product data such as UNSPSC classification, voltage, wattage, and IP rating to assist with specification. Buyers can request voltage and plug configuration details for their destination. 3G Electric does not manufacture these products; it distributes them and provides commercial and logistics coordination for international orders.

8:12 ILLUMINATION corded tripod balloon lights are used for temporary area lighting in construction, industrial maintenance, and emergency response. The balloon diffuser produces shadow-free illumination, which is useful for tasks requiring uniform light, such as night-time concrete pouring, scaffolding inspection, and turnaround maintenance. The IP65 rating allows use in dusty or wet conditions. The 26,000 lm model suits smaller work zones, while the 56,000 lm and 110,000 lm models cover larger areas. Because the units are corded and operate on 110/230V AC, they require a nearby power source or generator. The telescoping tripod reaches 9.8 feet, placing the light above eye level to reduce glare.