Global Manufacturing
Network

Af

Afriso is a German manufacturer specializing in combustion equipment and oil-supply systems for industrial burners. The company produces suction pumps, pressure units, and related control components used in heating installations, power generation, and process-industry applications across Europe and internationally. These components are engineered for reliable operation in fuel-oil delivery systems serving burners rated from small commercial to large industrial capacity. Afriso equipment is built to European standards and designed for integration into standardized burner-control configurations, making it suitable for retrofit or new-installation work where direct replacement or cross-compatible mounting is required. The SP32 pump line covers flow rates and pressure differentials typical of gravity-feed and pressure-head applications; individual models are designated by stage count and motor specification (e.g., 02-80E-D for two-stage electric drive, 01-D for single-stage). Pressure units like the SK9E/FP8E-F combine metering and safety functions in a compact footprint, reducing on-site assembly complexity. All units are sourced through authorized channels and supplied with original documentation and warranty support typical of German industrial equipment distribution.

Ai

Airsafe manufactures air filtration media and filter cartridges for HVAC, industrial ventilation, and air-conditioning applications. The product range includes rolled filter media in G2, G3, and G4 ratings per EN 779 / ISO 16890, supplied in standardized widths and lengths for on-site cutting and integration into existing ductwork and air-handling units. Cassette and split-configuration filters are available for ceiling-mounted and cabinet installations, with non-woven fabric construction offering antifungal efficacy above 99% in select models. Airsafe media delivers flow rates between 5040 and 5610 m³/h/m² depending on grade, with initial pressure drops ranging from 23 to 36 Pa, enabling thermal and dust-load sizing across light commercial and industrial ventilation duty cycles. Polyester construction provides durability in moderate-humidity environments and resists collapse under sustained airflow.

Al

Allanson manufactures combustion control transformers and ignition components for industrial burner systems, with a product portfolio primarily serving oil and gas burner applications. The brand specializes in control transformers rated for flame-safeguard circuits, stepping down line voltage to control voltages for ignition and fuel-valve operation in heating and process-heating equipment. Allanson transformers are found in retrofit and OEM configurations across Beckett burner installations and compatible multi-brand burner control circuits. These transformers are specified by plant maintenance teams and burner technicians when servicing or replacing failed ignition control stages in existing combustion equipment. The transformer line covers standard voltage and frequency ratings used in North American and international industrial installations. Allanson components are sized and rated for continuous duty in control circuits where reliability and regulation stability affect burner startup and flame-detection response.

Am

Ambiance manufactures programmable and non-programmable thermostats for HVAC and building climate-control systems. The product line focuses on digital room thermostats with wireless capability, serving plant engineers and facilities managers who require precise temperature regulation across industrial and commercial applications. Ambiance thermostats are built to Class IV energy efficiency standards and deliver ±1°C measurement accuracy at 20°C, a specification relevant for process environments where temperature drift directly affects equipment performance or product quality. The RF programmable models operate at 868.35 MHz with a 200-meter transmission range, enabling wireless sensor placement where hard-wired installation is impractical. Temperature control spans 7°C to 35°C (programmable models) or 0°C to 40°C (standard models), covering typical HVAC operating windows. Non-programmable variants simplify deployment in fixed-setpoint applications, while programmable units accommodate weekly scheduling and multi-zone setups. Standby current consumption ranges from 10–20 µA, minimizing battery replacement frequency in unattended installations.

Ap

Appion manufactures specialized diagnostic and recovery equipment for the HVAC/refrigeration service industry. The product range spans refrigerant recovery machines, charging scales, vacuum gauges, evacuation tools, and service manifolds—equipment designed for technicians performing system diagnostics, maintenance, and refrigerant handling. Appion tools are built around precision measurement, portability, and compliance with EPA and industry standards for refrigerant recovery and containment. The product line targets licensed HVAC technicians, commercial refrigeration service teams, and industrial maintenance personnel who require traceable, repeatable measurement and recovery workflows. Appion scales such as the WS260 are rated to 120 kg with digital readout and wireless data logging, addressing the precision required for proper charge quantities in commercial and industrial refrigeration systems. Vacuum gauges like the AV760 provide digital readout capability for evacuation verification. Service components—tees, hoses, and fittings—are manufactured in standard refrigeration port sizes (1/4" and 3/8" connections) to ensure compatibility with field-standard manifolds and recovery equipment. Appion's product design emphasizes field durability, measurement accuracy, and ease of integration into existing technician workflows.

Aq

Aquametro is a Swiss manufacturer of precision flow measurement and control equipment for fuel, oil, and fluid-handling systems in industrial burners, generators, and auxiliary power applications. The company specializes in volumetric counters, mechanical meters, and electronic flow-monitoring devices designed for integration into fuel-supply chains where accurate measurement, repeatability, and durability are non-negotiable. Aquametro's product portfolio includes mechanical counters (such as the VZO series), which operate on positive-displacement principles and deliver pulse or impulse outputs for remote monitoring and integration with burner controls. These devices are rated for mineral oils, fuel oils, and related fluids across a range of viscosity grades and operating temperatures typical of commercial and industrial heating systems. The meters are compact, directly threaded into fuel lines, and provide mechanical or electrical pulse output for integration into building management systems, burner controllers, or standalone data loggers. Aquametro equipment is designed for longevity in continuous-duty environments; the positive-displacement design means no moving parts in the flow stream beyond the measuring chamber, reducing maintenance intervals and minimizing internal leakage.

Ar

Ariston manufactures boiler controls, ignition systems, and thermal safety components for residential and light commercial heating applications. The brand's product portfolio centers on electronic ignition modules, ionization probes, safety thermostats, and control circuits—components integral to gas boiler operation and flame-supervision systems. These parts are specified for integration into boiler assemblies where reliable flame detection and temperature regulation are critical to safe, efficient combustion.

As

Aspen Pumps manufactures condensate removal pumps for air conditioning and refrigeration systems. The product range includes Microblue, Miniblue, Maxiblue, and Megablue series, each engineered for specific capacity and installation requirements in HVAC applications. Microblue units deliver 1.3 gallons per hour with a 16-foot maximum head and operate at 17 dBA, making them suitable for compact or low-noise installations. Miniblue pumps handle 8 litres per hour across suction and discharge distances up to 5 metres and 8 metres respectively, at 21 dBA. Maxiblue models, including diaphragm-based reversing alarm and cutoff variants, move 14 litres per hour with up to 8 metres maximum distance on both suction and discharge lines at 21 dBA operation. All units employ thermistor-level sensing or probe-based detection to monitor condensate levels and trigger pump operation or cutoff. The Aspen Pumps portfolio is available in dual-voltage configurations to support varied electrical infrastructure in different geographic markets. Product specifications are rated across flow capacity, maximum operating head, suction and discharge distances, noise emission, and sensing technology. All units are designed to handle condensate drainage without requiring external power drainage or sump pits in typical commercial and industrial HVAC settings.

As

Aspira Fantini manufactures climate control units engineered for industrial and commercial heating, ventilation, and comfort applications. The product lineup centers on modular comfort controllers available in multiple capacity tiers—the Ecocomfort series (including Ecocomfort 3, Ecocomfort Plus 100, and Ecocomfort Plus 160) and the Rhinocomfort 3—each designed to regulate thermal environments across facilities ranging from small to large-scale installations. These controllers integrate into HVAC and climate management systems where precise temperature and airflow monitoring is required. The Ecocomfort Plus variants are available both with and without integrated infrared remote-control interfaces, accommodating deployment scenarios where local or wireless operation is preferred. Controllers in the Aspira Fantini range operate within defined pressure and temperature specifications typical of industrial comfort-system environments.

At

Atraxtool is a supplier of field-service tools and instrumentation focused on HVAC and refrigeration work. The product range spans pressure regulation, temperature measurement, vacuum evacuation, torque control, and diagnostic gauging—equipment categories essential for system commissioning, maintenance, and troubleshooting in commercial and industrial cooling installations.

Ba

Bacharach manufactures gas detection and combustion analysis instruments used across industrial burner maintenance, HVAC commissioning, and emissions monitoring. The brand is recognized for portable, field-deployable measurement tools—smoke scales, opacity meters, combustion analyzers, and supporting reagents—designed for plant engineers and service technicians who need to verify burner performance and air quality compliance on-site. Bacharach's product range centers on manual and electronic sampling equipment that meets European industrial standards (DIN 51402) and carries TÜV certification where applicable. The comparison smoke scale (10-spot oil burner reference), opacity meter kits with calibrated sampling pumps, and specialized measurement liquids for CO₂ and other gas analyses form the core of the line. Equipment is specified with concrete operating parameters: pump stroke durations measured in seconds, sampling tube geometries (9/32" hole diameter, minimum 2.5" insertion depth), and repeatable measurement cycles (typically 10 or 15 pump strokes per sample). The brand's instruments are suited to environments where portability, durability, and accuracy without mains power or wireless connectivity are required—typical of industrial plant floors, service vehicle kits, and field laboratories.

Ba

Baite manufactures industrial burner systems and related combustion equipment, with a product range spanning compact packaged burners (BT14, BT26 series) through to larger modular units. The brand specializes in fuel-oil and gas burner assemblies designed for process heating, steam generation, and thermal applications across manufacturing and facility infrastructure. Baite burners are configured around standardized motor frames—including Y2-90S-2 and YY7112 variants—paired with inducer plates and fan assemblies to deliver controlled air-fuel mixing. The product portfolio emphasizes modularity and field serviceability; individual subcomponents such as the K3 inducer, BT14 burner head, and motor-coupling spares are held in inventory to support repair workflows without requiring full unit replacement. Baite equipment operates across standard industrial voltage and pressure ranges typical of stationary combustion installations, with components designed for thermal cycling and fuel-system compatibility.

Ba

Baxi is a European boiler and heating-equipment manufacturer with a product range spanning residential and light commercial hydronic systems. The company manufactures packaged boilers, heat-exchanger assemblies, and the control and safety components that enable reliable operation across various fuel types and firing configurations. These parts are used in routine maintenance, fault diagnosis, and system restoration on installed Baxi equipment. The spare-parts inventory covers common wear items and control-circuit replacements identified by Baxi's original part numbers (SX-prefix designations). Each component is held to OEM specification and rated for the pressure, temperature, and electrical duty of its application.

Be

Beck manufactures pressure switches, pressure transmitters, and related sensing and control accessories for industrial burner systems, HVAC applications, and gas-fired equipment. The product range spans air-only pressure switches rated 0.2–3 mbar, digital pressure transmitters with 0–1 and 0–2.5 mbar ranges, and mounting hardware including L-shaped and S-shaped metal brackets, climaset assemblies with PVC hose configurations, and bent metal tube variants. Beck components are designed for integration into combustion-control loops, fan-proving circuits, and gas-safety interlocks where reliable pressure detection and switching accuracy are required. The product line emphasizes straightforward mechanical and electronic design; pressure transmitters feature digital readout capability for field verification and diagnostics. Mounting brackets and climaset assemblies are supplied in multiple configurations to accommodate different burner frame geometries and ductwork layouts. Beck pressure switches are commonly specified in applications where switching set-points must be maintained within tight tolerances and where modular accessory integration is necessary.

Be

Source Beckett burners, combustion controls and burner components from 3G Electric — 250+ SKUs including combustion relays and pressure switches, with worldwide shipping. Request a quote.

Be

Beretta is an Italian heating-equipment manufacturer with a long operational history in boiler and HVAC system design. The brand manufactures condensing boilers, combi units, and associated hydronic components for residential and light commercial applications across Europe and internationally. These consumables and wear items are catalogued by OEM part number and cross-reference, enabling technicians and maintenance teams to source exact replacements without guesswork. Beretta spare parts are engineered to original specifications; common service intervals involve replacement of expansion-tank membranes, diaphragm seals in pressure vessels, thermal sensors (NTC probes, thermocouples), and circulation-pump components. The product range reflects standard boiler configurations—8-litre expansion tanks with half-inch ports, 46 mm and 90 mm diaphragm sizes, 320 mm thermocouples with Sit terminals, and fan assemblies rated for common Beretta burner designs. Whether managing a multi-unit residential heating portfolio or responding to field failures on combi boilers, maintenance teams rely on accurate spare-parts availability to keep systems operational and compliant with manufacturer specifications.

Br

Brahma manufactures electronic control systems and ignition components for gas and oil burners, with particular focus on atmospheric and fan-assisted burner applications. The product range centers on relay-based burner controls designed for intermittent operation in industrial heating equipment, alongside supporting bases, ignition transformers, and related spare parts. Brahma controls are rated for supply voltages spanning 220–240 V at 50/60 Hz and operate across industrial temperature ranges (typically −20 °C to +60 °C), with power consumption in the 10 VA range at startup for atmospheric burner configurations. The relay designs incorporate time-delay and safety-lock functionality suitable for non-permanent intermittent burner cycles, common in modular boiler plants, air-handling units, and distributed heating systems. The modular base architecture—separate relay modules and mounting bases—allows field technicians to configure control chains for varying fuel types and throughput specifications without redesigning the entire control loop. Replacement relay modules and ignition transformers are stocked to minimize downtime during scheduled maintenance or component failure.

Ca

Castel is an Italian manufacturer of refrigeration control components and solenoid valves for commercial and industrial cooling systems. The brand specializes in direct-acting and servo-controlled solenoid valves, pressure differential controllers, and thermostatic expansion devices used in refrigeration circuits where precise flow control and pressure regulation are required. Castel valves are rated as normally closed, meaning they default to a sealed state and open only when energized, providing fail-safe operation in refrigeration loops. The product family includes the MA series (direct-acting solenoid valves), MD series (pressure differential controllers), and MS series (servo-controlled direct-acting valves), all designed to handle the thermal cycling and vibration inherent in industrial refrigeration duty. Connection standards are ODF (oxygen-free copper tube) or flare types, allowing integration into existing systems without special adapters. These components are used in commercial refrigeration cabinets, walk-in coolers, chiller units, and process cooling applications where solenoid-actuated isolation or modulation is required.

CB

CBM is an industrial equipment manufacturer based in Europe, specializing in components and spare parts for burners, boilers, pumps, and fluid-handling systems. The product range spans solenoid valves, electrodes, oil nozzles, circulation pumps, motor couplings, cable glands, fittings, and diagnostic equipment including chlorine test kits. CBM supplies modular, standardized components rated for industrial heating and combustion applications, with parts commonly specified in boiler rooms, industrial furnaces, and plant maintenance environments. Product families are organized by function—ELV solenoid valves are rated for 230V AC control circuits; FLU oil nozzles follow atomizer type designations (24-P-10 and similar); ELC electrodes are threaded for NPT or metric ports in 1/4" and larger bores; ACC motor couplings include rigid type D configurations; and RAC fittings offer small-radius bends in 90° configurations for tight installation spaces. Cable glands in the CLI series accommodate proximity switches and sensor leads with M25 and other standard metric threads. Circulation pumps (mod. CM, 30W) integrate into boiler secondary circuits. Cleaning and water-testing kits enable on-site chlorine measurement and water-quality verification. Technical datasheets, port thread configurations, voltage ratings, and atomizer pattern specifications are provided with each listing to support plant engineers and maintenance teams in equipment selection, retrofit, and troubleshooting. Global shipping is available for components not in immediate local stock.

Ch

Chaffoteaux is a European boiler manufacturer with a deep heritage in residential and light commercial heating systems. The company's product portfolio spans multiple boiler series—including Nectra, Elexi, Senseo, Niagara, Centora, and Aludra models—engineered for hydronic heating applications across Europe and beyond. The product range includes membrane kits, diaphragms, ionization electrodes, air pressure switches, expansion tanks, thermistors, thermocouples, and specialized ignition electrodes. These components are specified for direct substitution into Chaffoteaux boiler assemblies and are identified by manufacturer part numbers (for example, membrane kit 81237, diaphragm 61020009, RS20 ionization electrode 60078258). The parts are sourced to original equipment specifications and cover both control and pressure-management functions critical to boiler system reliability. Stock is maintained at the Woodlands warehouse and available for same-day local delivery and global export. The inventory is organized by boiler series and component type, enabling straightforward cross-reference and procurement for customers familiar with Chaffoteaux nomenclature.

Co

Cofi manufactures ignition transformers and combustion control equipment for industrial burner systems across gas, oil, and dual-fuel applications. The product range spans step-up transformers (converting 220V primary input to high-voltage secondary outputs of 4000V to 8000V), gas transformers, oil transformers, and mounting accessories. Each transformer is specified for spark generation in industrial heating, combustion controls, and burner ignition circuits. Cofi transformers are typically supplied with integrated cable assemblies (ranging from 380mm to 400mm lengths) and are designed to meet the voltage and current demands of modern industrial burner controllers. The TRS series (gas transformers) includes models such as the TRS 515 PC/S, TRS 610 PC/S, and TRS 830 P/S, each rated to different secondary voltage outputs and suited to different burner configurations. The TRG series (fuel transformers) and TRE series (oil-immersed transformers) provide alternatives for systems requiring dual-output or immersed construction. Mounting kits and spina connectors are stocked to support field installation. The transformer range operates on 220V single-phase primary supply, a standard industrial utility voltage, making integration straightforward in existing control panels and combustion skids.

Co

Cointra is a manufacturer of boiler components and gas-burner controls, with a product portfolio centered on thermal-management hardware for industrial and commercial heating applications. The company specializes in natural-gas burner nozzles, thermostatic control valves, thermocouples, membrane seals, and ignition/safety control modules—components typically integrated into atmospheric and forced-draft boiler systems operating in continuous or non-permanent duty cycles. The control modules (exemplified by the MICROFLAT series) are rated for 2–4 mm spark gaps and operate at low consumption (2.5 VA typical), with non-volatile and volatile lockout logic and SELV-type safety circuits compliant with 24 V DC safety standards. These components are manufactured to tolerances suitable for replacement in OEM boiler units and third-party service applications. Cointra's nozzle and seal geometries are standardized (e.g., membrane diameters of 36×44 mm, M10 and M5 valve ports) to facilitate cross-unit compatibility. The product line addresses the routine maintenance and failure-recovery cycles common to industrial boiler fleets—nozzles subject to carbon buildup, membranes and seals prone to thermal fatigue, and control circuits requiring periodic replacement due to spark-electrode wear or valve stiction.

Co

Combutech manufactures combustion control and flame detection equipment for industrial burner systems, heating applications, and process automation. The product range focuses on pressure monitoring, flame sensing, and control logic units designed for integration into oil and gas burner installations across manufacturing, power generation, and facility management sectors. Combutech's pressure switches operate across the 2–500 mbar range with ±15% allowable deviation and IP54 protection, suitable for both low-pressure monitoring and process-critical applications. The company supplies UV flame detection cells rated to 10,000+ operating hours with IP65 sealing and recovery times of 20 microseconds, paired with flame relay modules that manage up to 10 simultaneous detectors. Control units such as the COMBU1s operate at 230 V ±15% with adjustable purge timing (1–250 seconds) and integrated safety delays, allowing plant engineers to configure startup sequences and load management without external PLC logic. All process connections follow standard industrial threading (1/4" female and 3/4" gas ports), and electrical connectors conform to DIN-EN 175301-803 and DIN43650 standards for straightforward panel integration.

Co

Copeland manufactures scroll and reciprocating compressors for commercial refrigeration, air-conditioning, and heat-pump applications. The brand is recognized in industrial cooling for precision-engineered displacement series spanning 1.5 to 30 CV, covering small-capacity spot coolers through large modular systems. Each unit is factory-tested for discharge and suction pressure performance; typical discharge ratings run 43–45 bar(g) against suction pressures of 20–29.5 bar(g), matching medium-to-high-capacity cooling loads in supermarket display cases, industrial process chillers, and packaged rooftop units. Copeland compressors are fitted with integral capacity modulation and thermal overload protection, allowing variable cooling output without external regulators. Supply voltages standardized at 380–420V 3-phase 50 Hz across the regional product range. Typical lead times for in-stock SKUs are same-day or next-business-day fulfillment; custom displacement or voltage configurations require manufacturer lead time.

Cu

Cuenod is a manufacturer of combustion control electrodes and ignition systems for industrial burners. The product line centers on flame-detection and ignition hardware: electrode assemblies, ionization probes, and interconnect cables designed for integration with Cuenod burner control packages across a range of firing capacities. Primary electrode families include the C-series (C3G, C4, C5G, C7, C10, C14, C18, C20, C22, C24, C30), DX electrodes, and NC-series variants, each specified for particular burner frame sizes and combustion chamber geometries. Ignition electrodes and ionization probes are supplied as complete assemblies—combining the detection rod, probe body, and pre-terminated cable—to reduce field assembly time and ensure impedance matching with control module inputs. Ionization cables (designated TGF and TEF variants with length codes such as LG 380 or LG 530) connect probes to flame-supervision terminals on the burner management system. Each electrode type is rated to withstand the thermal and electrical stresses of continuous or intermittent burner duty; specifications include operating temperature ranges, probe resistance characteristics, and cable shielding standards appropriate for industrial HVAC, process heating, and power-generation boiler applications.

Da

Danfoss is a Denmark-based manufacturer of industrial controls, refrigeration components, and fluid handling equipment serving HVAC, process heating, refrigeration, and industrial automation sectors. The company produces thermostats, pressure switches, gas controls, expansion devices, solenoid valves, and related instrumentation used in heating systems, steam boilers, refrigeration units, and process applications across commercial and industrial installations.

De

Delta manufactures oil pumps and fuel units for industrial burners, hydraulic systems, and lubrication applications. The product line spans several pump families—A-series, AD-series, A2-series, VM-series, and VU-series—each optimized for specific pressure ranges, flow rates, and filtration requirements. Delta pumps are rated for operation at 230 VAC 50/60 Hz with maximum rotation speeds of 3500 rpm. Pressure settings are available in the 10 ±0.3 bar and 20 ±0.3 bar range, depending on model. Strainer materials include stainless steel mesh (130 µm) for fuel units and nylon mesh (150 µm) for hydraulic applications, with filtration areas ranging from 11 cm² to 20 cm². Nozzle ports conform to G1/8" standard, and hub diameters are uniform at 32 mm across the range, enabling straightforward integration into existing piping layouts. Cable assemblies are supplied at 700 mm length with 3-core configuration. Flow rates range from 35 l/h to 55 l/h depending on pump designation.

DS

DSZH is an HVAC tools and components manufacturer specializing in refrigeration service equipment, hose fittings, and manifold accessories. The product line encompasses SAE and NPT threaded connections, flare fittings, adapter bottles for refrigerant recovery, reducer unions, and field-service tool attachments—components routinely encountered in air-conditioning, heat pump, and refrigerant-handling applications. DSZH designs these items to meet ISO and SAE standards for refrigeration systems, with materials and thread specifications matched to R-series refrigerants including R600A and common HFC/HFO alternatives. The catalog includes hose tips in fractional inch and metric sizes (1/4", 5/16", 5/8", 7/8" diameters), reducing adapters for pressure-line gauges and recovery equipment, flare connector caps, dudgeon extensions, and multi-port bases for manifold assembly. These components are suited for technicians who service split-system air conditioners, packaged rooftop units, process-cooling loops, and industrial refrigeration systems where reliable, leak-free connections are essential.

DT

DTekGaz is an industrial gas detection equipment manufacturer supplying fixed and portable monitoring systems for hazardous and toxic gas environments. The product portfolio spans catalytic and semiconductor sensor probes, control modules, audible alarm units, batteries, and extension cards designed for deployment in petrochemical plants, refrigeration systems, hazardous areas, and industrial process monitoring. DTekGaz probes are available in multiple sensor types—catalytic sensors for explosive gas detection, semiconductor sensors for refrigerant monitoring (R407C, R410A, R32, R134a, R404A, 507), and electrochemical variants for specific gas families. Many models carry ATEX EX II2 GD certification for use in Group II explosive atmospheres, meeting EN standards for safety-critical applications. IP ratings across the range span IP54 to IP65, accommodating indoor control rooms and outdoor or wet-environment installations. Probes feature microprocessor control with automatic calibration and diagnostic functions, reducing maintenance intervals and field recalibration costs. Detection thresholds are configurable; extension card modules trigger pre-alarm at 13% LEL and main alarm at 20% LEL, with three relay outputs for fault, pre-alarm, and general alarm signaling. Power supplies include rechargeable 12 V DC batteries (6 Ah capacity, 17% self-discharge after 6 months) and 24 VDC operation for fixed installations. Audible alarm units deliver 100 dB sound output with integrated flashlight indicators.

Du

Dungs is a German manufacturer specializing in gas regulation, combustion control, and safety equipment for industrial burners, boilers, and heating systems. The company produces pressure regulators, solenoid valve blocks, pressure switches, and related control components designed to manage fuel gas flow, monitor system pressure, and ensure safe operation across residential, commercial, and industrial applications. Dungs equipment is built to handle natural gas, liquefied petroleum gas (LPG), and other fuel gases within defined family classifications and hydrogen-sulfide limits. These components are engineered without non-ferrous metals in critical areas to ensure compatibility with specified gas qualities and long service life in demanding combustion environments.

Dw

Dwyer Instruments manufactures and distributes industrial measurement and control equipment, with product lines spanning differential pressure gauges, flow meters, pressure transmitters, and environmental monitoring devices. The brand serves plant engineers and maintenance teams across HVAC systems, compressed-air networks, process automation, and general industrial applications. Dwyer's product portfolio emphasizes analog and digital instrumentation rated for standard industrial environments, with operating ranges and connection standards suited to OEM integration and field retrofit applications.

Ec

Eckerle is a German manufacturer specializing in condensate pumps and related components for HVAC, refrigeration, and air-conditioning systems. The product range addresses the removal of condensate water from evaporator coils in climate-control applications, from small packaged units through large commercial installations. Condensate pumps in the Eckerle range are rated for lift heights between 8 and 10 meters and flow rates from 9 to 16 liters per hour, serving cooling systems from 5 kW to 10 kW capacity. Units operate on 230 V 50/60 Hz supply, with power consumption typically in the 16–50 W bracket. Noise levels range from under 19 dB (Touchline 10) to approximately 36 dB (TATTOO 5), enabling selection for noise-sensitive environments such as offices and residential spaces. Many models include thermal safety cutouts set at 120°C and alarm contact relays (NO/NC 8A 230V) for integration into building management systems. Connection sizes are standardized (5 mm, 6 mm, and 10 mm diameters) to fit common evaporator drain configurations. Maintenance is minimal—annual cleaning of the pump chamber by dismounting the cover—and pumps can be installed in either horizontal orientation beneath the evaporator.

Ec

Eclipse manufactures ignition and sensing electrodes for industrial combustion equipment, with product lines serving burner control systems, gas ignition assemblies, and flame-detection applications. The range includes standard and custom ignition electrodes, spark plugs, ionization probes, and related flame-safeguard components designed for integration into industrial burners, boilers, furnaces, and process-heating equipment across manufacturing, petrochemical, and utility sectors. Eclipse electrodes are specified by dimensional standard (thread pitch, electrode gap, probe length) and material composition to match specific combustion-chamber geometry and ignition-voltage requirements. Products are rated for continuous operation in high-temperature environments and are compatible with standard ignition-transformer outputs (typically 4–10 kV). Each SKU is identified by Eclipse's reference designation, allowing cross-verification with OEM equipment documentation and service bulletins. Stock availability covers both metric-threaded and fractional-inch fastener patterns. Technical specifications are accessible via Eclipse reference number, supporting direct equipment pairing and retrofit planning.

Ec

Econex manufactures heating system control components, primarily butterfly valves and servo motors for residential and industrial combustion applications. The product line focuses on flow-control and actuator solutions rated to European standards (EN 161, ISO 7005) with DVGW and CE certifications for gas-appliance compatibility. Butterfly valves are available in bare configuration across DN40 to DN150, each rated PN16 with ISO 7005 flanged connections suitable for retrofit and new-build heating circuits. Servo motors span 24V AC and 230V AC supply voltages, delivering 90° rotation in 15 seconds with 4-20mA proportional control and IP54 enclosure ratings; ISO 5211 F07 fastening enables direct coupling to valve stems. All units operate across -10 to +60°C ambient temperature ranges. Compliance includes EC Gas Appliance Directive 90/396/EEC certification for gas-system applications and DVGW approval for heating-circuit isolation. Product selection emphasizes compact design, modular fastening standards, and straightforward integration into existing heating and combustion-control loops without requiring system redesign.

El

Elco manufactures electrodes and motors for industrial combustion and heating applications, with a product line centered on ignition and ionization components for burner systems. The company supplies flame-detection electrodes, ignition electrodes, and integrated motor assemblies designed for use in oil and gas burners across residential, commercial, and industrial scales. Elco electrodes are engineered to withstand thermal cycling and electrical stress inherent in continuous-duty and intermittent-duty burner operation. The block-electrode series (EL 1 and related variants) provides robust construction for reliable electrode positioning and electrical contact in flame-sensing circuits. Ionization electrodes such as the EG01 support flame-safety interlocks by detecting flame ion currents, a standard requirement in modern burner control systems. Ignition electrodes in the EG1 family deliver timed spark pulses to initiate combustion in fuel-air mixtures. Motor offerings, including the EL EB 95 series, support fuel-pump drives, air-blower circuits, and valve actuation in burner management systems. Elco products are specified by plant engineers and maintenance managers where burner control reliability and fast spare-parts availability are operational priorities. The electrode and motor portfolio is designed for compatibility with standard burner control modules and flame-safety relays used across European and global burner platforms.

El

Elektrogas manufactures gas control and regulation equipment for industrial combustion, process heating, and gas distribution applications. The product line centers on solenoid valve coils, complete solenoid valves, and gas regulation assemblies designed for integration into burner management systems, industrial furnaces, and gas pipeline infrastructure. Elektrogas equipment is specified across pressure ranges from 200 mbar to 6 bar, with coil voltages spanning 12V AC/DC, 24V DC, and 230V AC to match site electrical standards. Port sizes range from 3/8" to 12", accommodating both compact modular burners and large-scale industrial gas feeds. The solenoid valve lineup includes threaded and flanged body styles (DN 80 and larger available), with power ratings typically 20–180 W depending on coil specification and duty cycle. Coil designations such as VMR, VML, EVRMNC, EVRMNCOT, and EVRMNA indicate different electromagnetic and functional characteristics suited to on-off or proportional control duties. All units are designed for direct NG, LPG, or propane service in industrial settings.

EL

ELM Leblanc manufactures boiler control components and gas regulation equipment for residential and light commercial heating systems. The product range covers safety thermostats, air vents, ignition systems, control switches, and heat exchanger seals—components critical to boiler reliability and safe operation. ELM Leblanc parts are identified by OEM reference numbers (such as 87167045230, 87167283490, and 87167338610) and are designed to integrate into existing boiler assemblies where replacement or repair is required. The product families we carry include inverter micro-switches for flame-control circuits, safety thermostats calibrated to specific temperature limits (85°C and 120°C variants are in stock), automatic air vents rated to 1110°C for system venting, electronic igniters for gas ignition sequences, mini switch kits for control logic, extractors for flue gas handling, and heat exchanger seal kits for system integrity. These components meet operational requirements in boiler systems where precision switching, thermal protection, and reliable ignition are non-negotiable. We supply complete part numbers and technical specifications to support procurement and installation planning.

El

Elster manufactures turbine and rotary-displacement gas meters for industrial measurement and custody-transfer applications. The brand's product range spans from compact 1-inch models (QA10, QA16) rated to 16–25 m³/h through mid-range quantometers (QA100, QA160) handling 160–250 m³/h, up to large-bore meters (QA250, QA650) rated to 400–1000 m³/h at DN80–DN150. All meters are aluminum-bodied and rated to 16 bar (PN 16) or higher pressure classes, with ±1.5% accuracy and 1:20 measuring ranges typical across the QA series. Elster meters are designed for natural gas, air, methane, nitrogen, and other non-corrosive gases in utility, industrial process, and burner-supply applications. The QA series includes mechanical totalizers and optional output interfaces—Namur E200, optical (EN 1434-3), M-BUS, and L-BUS—enabling integration with building management and SCADA systems.

EL

ELV manufactures solenoid valves and replacement components for industrial fluid-control applications across air, water, oil, and gas systems. The product range spans compact 2/2-way and 3/2-way directional valves through larger cavity designs, with coil voltages available in 12V AC, 48V AC, 110V AC, and 230V AC to accommodate different electrical installations. Replacement parts—including solenoid coils and elastomer membranes (NBR)—are stocked separately to minimize downtime during maintenance cycles. ELV valve bodies are rated across multiple pressure ranges, with models accommodating flows from fractional to several hundred liters per minute depending on cavity size and orifice configuration. The solenoid actuators feature standard coil connector styles and are designed for integration into manifold systems, standalone piloting duties, and proportional control architectures common in packaging machinery, pneumatic automation, and fluid-power circuits. This distributed holding strategy supports fast replenishment for routine valve maintenance on production lines where changeover time is critical. ELV's modular cavity design allows cross-mounting of different coil types on the same valve body, so specifying a valve base once permits straightforward electrical reconfiguration as plant requirements evolve—for instance, stepping from 230V to 48V control circuits without mechanical redesign.

ES

ESA manufactures microprocessor-based burner control and ignition systems for industrial combustion equipment, with a product range spanning flame-detection controllers, driver cards, and photoelectric sensors. The brand specializes in permanent-operation ignition architectures designed to meet EN298 and EU machinery directives (2016/426/EC, 2014/35/EC, 2014/30/EC), serving plant engineers who specify controls for oil and gas burners, industrial heaters, and related thermal equipment. The product lineup includes the ESTRO series (B-V2, C, and Q variants), which use thermosetting glass-fiber or thermoplastic housings and offer IP40 to IP54 environmental protection; the ECS driver-card range for fieldbus integration (supporting RS-232/RS-422 interfaces, max 200 m line length, and 25 VDC fieldbus voltage); and flame-detection modules such as the UV2 photoelectric cell (185–260 nm spectral response) and the Genio 230 V controller with UV or ionization-electrode probe selection. Specifications across the range reflect industrial duty: fused outputs (3.15 A typical), high isolation (>50 MΩ), DIN rail mounting for integration into control cabinets, and probe voltages rated to 280–400 Vac.

Eu

Eurostop manufactures water treatment additives and devices engineered for closed heating systems, condensate lines, and industrial fluid applications. The product line focuses on preventing common operational failures: leakage sealing, scale buildup in condensate systems, and corrosion in oxygen-barrier environments. Eurostop anti-drip devices are specified by density (1.37 g/cm³ typical), vapour pressure (2.20 hPa at 20°C), and maximum leak capacity—for instance, the SP 10 handles up to 10 litres per day. These formulations integrate into existing closed-loop systems without requiring system drain-down, reducing downtime during application. The condensate product range (EURODIS0 for descaling, EURODISF concentrate for unclogging) addresses fouling in low-temperature return lines, a chronic issue in systems running extended hours or processing hard water. Eurostop's chemistry is designed around compatibility with standard circulation pumps, heat exchangers, and oxygen-barrier tube materials found in European and North American installations. Technical datasheets include toxicology data (e.g., LD50 oral values) for safety compliance and handling procedures.

Eu

Euspray manufactures spray nozzles for industrial fluid-application systems, with a product portfolio spanning flat jet, full cone, and hollow cone nozzle designs. The range covers connection sizes from 1/8" to 1/4", pressure classes from standard to high-pressure, and materials in brass and stainless steel. Spray angles range from 25° to 128°, with flow rates calibrated across multiple index ratings to suit cooling, cleaning, coating, dust suppression, and washing operations in manufacturing and process plants. Euspray nozzles are engineered with precision orifice geometry and rated for industrial duty; construction materials are chosen for corrosion resistance in chemical and water-based applications. Connection standards include NPT, BSPT, and metric male threads, allowing integration into existing piping and manifold systems. Typical applications include heat-exchanger spray cooling, parts cleaning in machining facilities, dust control in bulk-material handling, and liquid-coating distribution in process lines. Engineers and maintenance teams select Euspray nozzles by matching spray angle, flow rate, connection size, and material to the working fluid chemistry and operating pressure of their system.

FA

FAG manufactures flue gas analysis equipment and gas control components for industrial combustion monitoring and fuel gas regulation. The product line centres on portable and installed analyzers, pressure regulators, filter cartridges, and sampling accessories used in boiler rooms, burner test facilities, and plant maintenance workflows. FAG regulators and filters are rated for natural gas, LPG, and non-corrosive gases, with inlet pressures to 500 mbar and outlet ranges typically 5–300 mbar, meeting standards such as UNI EN 88 Classe A gruppo 2. Filter cartridges are available in multiple flow configurations (10001/02, 10206, 10207/08, 10210, 10604/5/6 series) to suit different analyzer inlet demands and contamination loads. Pressure taps and sampling manifolds support connection of probes and sensors to plant gas lines. Component construction uses aluminum die-cast bodies (GD AISi 12 EN AB 46100, G AISi 9 EN AB 43100) and zinc-alloy covers, selected for corrosion resistance in humid boiler environments. Technicians and plant engineers rely on FAG filter and regulator modules to maintain measurement accuracy and extend analyzer service intervals by removing particulate and moisture before flue gas enters sensor cells.

Fa

Fagor is a Spanish industrial boiler manufacturer with decades of operational experience in heating and hot-water systems. The company produces a broad range of commercial and industrial boilers alongside specialized components—thermocouples, gas nozzles, filling valves, plate heat exchangers, electronic control circuits, and structural assemblies such as water bodies and pilot tubes.

Fa

Fantini Cosmi is an Italian manufacturer of industrial control and switching devices for thermal systems, hydraulic circuits, and fluid management applications. Founded in the 1950s, the company specializes in pressure switches, thermostats, level regulators, and boiler controls—components critical to safe operation of heating plants, steam systems, and pressurized equipment across Europe and globally. The product range spans pressure sensing from 1 to 300 bar, temperature monitoring via vapor-tension and immersion elements, and liquid-level detection with cable lengths up to 15 meters. Fantini Cosmi devices are engineered around diaphragm, piston, and bellows sensing elements; most are rated IP40 or IP68 for mounting in control cabinets, pump stations, and vessel applications. Connection standards include G 1/4 threaded and flange ports, two-pole cable terminations, and switch contact ratings from 5A to 16A at 250 VAC. The product portfolio aligns with ErP (Energy-related Products) directives, particularly for boiler and heating controls sold into EU markets. Delivery is available from the Woodlands warehouse with options for expedited shipment, technical datasheets, and configuration support for integration into existing burner-control and hydronic-system architectures.

FB

FBR manufactures industrial combustion equipment—diesel burners, gas burners, and dual-fuel systems—designed for process heating, steam generation, and thermal applications across manufacturing, petrochemical, and utilities sectors. The product range spans single-fuel (diesel or gas) and convertible dual-fuel configurations, with models rated from approximately 100 kW to over 600 kW thermal output. FBR burners are modular in construction, with interchangeable nozzles, fuel trains, and control electronics that allow field adaptation to different fuel types, combustion chamber geometries, and facility requirements. Standard features include three-phase electrical supply on most models, CE compliance on gas-fired units, and metric nozzle diameters (typically 97–335 mm) matched to burner class and power rating. The product portfolio includes standalone burners, pre-assembled gas-train subassemblies (with DN sizing up to DN100 and pressure ratings suitable for low- and medium-pressure applications), and flanged intermediate adapters for mounting flexibility. FBR's modular approach allows integration into existing boilers and furnaces with minimal modification. Technical documentation includes thermal power curves, air-requirement tables, and fuel-type variant specifications (methane, propane, diesel) to support procurement and installation engineering.

Fe

Ferroli manufactures boiler systems and heating components for residential and light commercial applications. The brand produces a range of gas-fired and electric boilers, along with an extensive catalog of replacement parts and assemblies for maintenance and repair. These components are rated to standard European heating-system pressures (typically 0–4 bar gauge for measurement devices, 17 mbar activation for safety switches) and are designed for integration into closed-loop heating circuits. Ferroli components follow conventional boiler engineering practices: stainless-steel or brass construction for corrosion resistance, threaded connections (3/4" and standard metric ports), and calibrated measurement instruments for system diagnostics. The spare-part ecosystem includes pressure-measurement instruments (analog manometers), flow-sensing turbines, main circuit boards, expansion tanks for thermal-volume compensation, and control switches. Purchase orders, technical datasheets, and pressure-rating specifications are available upon request.

Fi

Fireye manufactures combustion-control systems and flame-detection equipment for industrial burners, serving power generation, petrochemical, refining, and large-scale heating applications. The product line centers on programmable controllers, modular amplifier units, flame scanners, and fuel-gas solenoid valves—components designed to manage ignition sequences, monitor flame presence, and regulate burner safety interlocks. Fireye controllers operate on 120VAC or 230VAC supply and integrate UV or infrared flame-detection sensors; typical models include the M-Series II chassis (available with local or remote reset capability) paired with modular programmer and amplifier cards that can be configured for specific burner types and safety protocols. The UV1A series flame scanners feature 1/2" NPT process connections and standard lead lengths of 6 feet, designed for retrofit into existing burner housings. Closed wiring bases and tube assemblies provide shielded signal paths to reduce electromagnetic interference in electrically noisy plant environments. Fireye equipment is engineered to IEC and NFPA standards, with IP ratings suitable for outdoor or washdown-adjacent installation. Technical specifications—such as flame-detection response time, solenoid coil power ratings, and modular configuration limits—are available on request. Integration documentation and wiring diagrams for Fireye controllers are supplied with each order to support on-site commissioning and maintenance technician handover.

Fr

Francel manufactures gas regulators and ignition electrodes for industrial combustion and pneumatic applications. The product range spans Type B domestic and laboratory regulators (21–37 mbar setpoints), pneumatic system regulators (R-series, 10.0 m³/h capacity), and ignition electrode wands for burner control. Francel regulators feature sphero-conical or flat inlet connections, flat meter outlets, and integrated safety relief venting (typically 10 mm); outlet pressures are factory-set and field-adjustable across the product line. The R-series pneumatic regulators deliver consistent flow at low pressure drop (0.25 kPa nominal) and are rated for 3/8" and 1/2" pipe connections (Rp thread). Ignition electrodes are supplied in standard lengths (43" wand) with 3 mm diameter active elements and ceramic sheath protection, designed for reliable spark initiation in industrial furnaces and burners. All units are supplied with original manufacturer documentation; custom setpoints and connection options may be available through direct inquiry. The brand serves laboratory gas delivery, residential and commercial gas distribution, pneumatic tool circuits, and industrial combustion control across process heating, analytical instrumentation, and facility utilities.

Gr

Grundfos is a Danish pump manufacturer founded in 1945, specializing in circulation, pressure, and transfer pump systems for industrial, commercial, and residential applications. The company operates globally with manufacturing and distribution facilities across multiple continents, serving sectors including HVAC, oil supply, building services, and process industries. The SI-30 condensate pump addresses air-conditioning installations up to 20 kW, rated for 20 l/h maximum flow with automatic thermal protection at 115 °C, suitable for continuous operation in cooling circuits. Oil supply systems include the GPS130NW pressure and suction units for burner applications, complemented by volumetric meters (VZO15, VZO20) that provide flow measurement and pulse-output capability for monitoring and control integration. The SUNP0400 charging and washing pump delivers variable flow (5–35 L/min) at 4.0 bar maximum pressure, powered by a 0.37 kW motor with 25-liter reservoir capacity, designed for descaling and cleaning maintenance tasks on industrial equipment. Grundfos products are constructed to operate within defined temperature and pressure envelopes, with safety interlocks and thermal cutouts typical of equipment serving critical building systems. Technical documentation, dimensional drawings, and electrical connection details are provided with each SKU to facilitate integration into existing piping, electrical, and control architectures.

Ho

Honeywell manufactures industrial control systems and components used across combustion management, gas handling, and thermal process regulation. Honeywell's flame-detection cells use ultraviolet or infrared sensing to monitor combustion status and trigger safety shutdowns on flame loss; these cells (such as the C 7027 and C 7061 series) mount directly into scanner heads and interface with controller modules rated to industrial burner duty. Pressure switches in the C 6097 family measure gas line pressure across ranges from 30 mbar to 500 mbar, meeting EN 1854 and FM/UL certification standards for overpressure, underpressure, and differential-pressure monitoring in gas distribution networks. Control motors—including the M7284 and MF 4000 series—position valve actuators and damper dampers across ambient temperatures from −15 °C to +60 °C, typically rated for 110 Vac or 220–240 Vac supply with integrated cable glands and factory-set shaft positions. Honeywell's modular design approach allows technicians to source individual cells, motors, and switches as field replacements without replacing entire control cabinets, reducing downtime and capital cost. The product portfolio emphasizes compliance with industrial safety directives (70/396/EEC for gas appliances, EN 1854 for pressure equipment) and carries third-party certification (FM, UL) relevant to plant operators in regulated jurisdictions.

In

Inpro is a manufacturer of gas regulation and oil supply equipment for industrial burner systems, lubrication circuits, and fluid-handling applications. The product range spans pressure regulators, fuel transfer units, tank monitoring systems, filtration cartridges, and emergency access components—primarily serving plant maintenance teams operating heating systems, burner installations, and centralised oil-supply networks. Inpro equipment is engineered to ISO and EN standards, with documented specifications on operating pressures, flow rates, filtration grades, and environmental ratings. The gas regulation line includes cabinet-mounted assemblies (such as the GAZ70009 and GAZ70011 models) with transparent inspection windows and emergency hammer-and-chain access tools. The oil supply family comprises self-priming gear pumps (MR-5U), low-pressure burner fuel units with integral regulation (VD2 LR-2.2 series), suction-line and return-line pumps (VDU5L23), diesel filters with stainless-steel mesh cartridges (Series 202), and tank-level monitoring systems (TANKALERT SMS) with ultrasonic sensing, IP67 enclosure rating, and GSM/GPRS remote notification. Inpro components are rated across defined pressure ranges (typically 2 bar return-line maximum for oil pumps), rotation speeds up to 3500 rpm, and filtration tolerances from 44 µm to 150 µm mesh.

In

Interpump is an Italian hydraulic-equipment manufacturer specializing in high-pressure pumps, motor-pump units, pressure-regulation valves, and transmission accessories for industrial cleaning, fluid transfer, and process applications. The product range spans fixed-displacement gear and piston pumps rated from 160 to 310 bar, electric motor-pump assemblies with direct-drive and gearbox configurations, and automatic pressure regulators designed for flow control and system protection. Interpump pumps are supplied in both standalone and integrated formats—with and without pressure-relief valves, with rail-mounting provisions, and with outlet configurations ranging from SAE flanges to metric threads. Motor-pump units integrate 3-4 kW single-phase and three-phase electric motors with pump heads, commonly fitted with thermal overload switches and base frames for industrial spray systems and stationary installations. Pressure-regulation valves (Setmatic, Unicontrol, and equivalent series) accommodate flow rates of 6 l/min and pressure settings up to 310 bar, available in G3/8 and M22×1.5 thread patterns, serving both injection and non-injection applications. Interpump transmission accessories, including gearbox units rated to SAE J609 engine flanges, enable pump operation from shaft-driven or belt-driven prime movers. Technical specifications are documented by flow rate (3–12 l/min typical), pressure class, displacement per revolution, motor electrical characteristics (voltage, current, thermal class), and mechanical mounting standards, allowing direct substitution and system integration by plant engineers and maintenance technicians.

It

Itron manufactures turbine gas meters for industrial flow measurement and custody-transfer applications. The IGTM-WT series comprises modular turbine-meter designs covering DN50 through DN150 body sizes, with flow-range selections from 10 m³/h minimum (G40+65 DN50) to 1600 m³/h maximum (G1000 DN150). Each meter is constructed from anodized aluminium, rated IP 65 for environmental protection, and complies with CE marking and EN 2014/68/EU PED (pressure equipment directive). Output configurations include dual impulse-generator options: 1R1 (10 imp/m³) for low-speed accumulation and HF3 (4400 imp/m³) for high-frequency logging, enabling integration with telemetry, SCADA, and billing systems. The modular sizing approach—where body diameter (DN) and meter capacity (G-rating) are independently selected—allows procurement teams to match flow-range accuracy windows to field conditions without oversizing or undersizing. Turbine-meter operation relies on positive-displacement principles: inlet gas accelerates a rotor inside the meter body; each blade passage generates a pulse captured by the impulse generator. This design delivers repeatability suitable for fiscal metering, process control, and utility infrastructure. Technical specifications—body size, flow range, k-factor assignments, and output pulse rates—are documented per unit to enable direct integration into flow-computer and IoT data-logging deployments.

Je

Jetoil manufactures precision oil nozzles for industrial combustion, heating, and fuel-atomization systems. The product range spans full-cone spray nozzles in discrete flow ratings from 0.40 to 35.00 gph, with spray angles of 30°, 45°, 60°, and 80° to accommodate varied burner geometries and application requirements. Nozzle sizes range from 1.35 through 22.00, allowing engineers to select the exact flow and spray pattern needed for their fuel-oil atomization duty. Each nozzle is designated with an 'S' type classification, indicating full-cone solid-spray geometry suited to pressure-atomized fuel delivery in industrial boilers, furnaces, and heating appliances. Jetoil nozzles are widely specified in applications where reliable, repeatable fuel atomization is critical to combustion efficiency and flame stability. The combination of discrete flow-rate steps, multiple spray angles, and tool-kit availability allows maintenance teams and plant engineers to keep replacement inventory on hand and execute nozzle swaps with minimal downtime. Jetoil nozzles are compatible with standard pressure-atomization fuel-oil systems operating in the range typical of industrial and commercial heating equipment, making them a drop-in specification for retrofits or routine maintenance cycles.

Ju

Junkers is a German industrial boiler and heating-equipment manufacturer with a product portfolio spanning commercial and industrial steam and water boilers, burner controls, safety devices, and integrated hydronic systems. The brand's catalog emphasizes modular construction and standardized component interfaces, enabling field service and retrofit work across generations of equipment. Junkers boilers operate across heating-load ranges from residential multi-unit applications to large industrial process steam and hot-water generation, with models rated for pressures from atmospheric to 25 bar and temperatures up to 120 °C operating fluid. The company manufactures or sources pilot assemblies, fuel-control regulators, combustion sensors, pump assemblies, sealing kits, ignition components, and instrumentation as original equipment; these same parts are available as service replacements through authorized distributors. Inventory focuses on high-turnover service items for Minimax and W-series boiler platforms, which are widely deployed in district heating networks, facility-management heating plants, and industrial thermal-process applications across Europe and Asia-Pacific.

Ko

Kobold manufactures turbine and variable-area flow meters for industrial liquid and gas measurement. The product range spans compact low-flow units (2–20 l/h) through mid-range industrial applications (up to 400 l/h and beyond), with models available for water, oils, and other process liquids. Kobold flow meters use mechanical turbine elements or float-column designs to deliver direct flow indication and repeatable accuracy across process-control environments including cooling loops, HVAC systems, chemical dosing, and utility monitoring. These meters are manufactured to withstand industrial duty conditions—rated for working pressures up to 16 bar in typical configurations and sized for nominal pipe connections from 10 mm to 25 mm. Kobold designs emphasize mechanical simplicity: turbine rotors spin in response to flow, with output signals transmitted mechanically or electronically depending on the model variant. Models with rod guiding (such as LZT-25S16) provide stable float position and improved readability in vertical or horizontal mounting. Lead times and inventory are managed centrally; technical datasheets and application guidance are available upon request for specification validation and sizing.

Kr

Kromschroder is a German manufacturer of gas-control equipment and burner instrumentation serving industrial heating, power generation, and process-combustion applications globally. The company specializes in precision solenoid valves, pressure switches, gas filters, and integrated control modules designed for safe, repeatable operation in demanding environments. Kromschroder equipment is built to handle upstream pressures to 500 mbar, ambient temperatures to +110°C, and carries certifications including EN 1854 class S, FM, UL, AGA, and GOST-TR, meeting both European safety directives and international standards for SIL 3 and PL e functional safety. The VAS solenoid-valve range offers integrated flow-adjustment options and color-coded LED indicators for field diagnostics; pressure switches span single-function and differential-pressure configurations with screw-terminal or plug connections suitable for retrofit or new-build integration. Kromschroder components are commonly deployed in oil and gas burner systems, industrial steam generators, air-heating units, and biogas facilities where gas-supply reliability and pressure-regulation precision are critical.

Ma

Maxon is a manufacturer of ignition and flame-detection components for industrial combustion equipment, with a product portfolio centered on electrodes and spark plugs for burner systems. The company supplies flame electrodes, spark plugs, and related ignition hardware designed for integration into oil and gas burners across a range of thermal applications—from process heating to power generation. Maxon's electrode lineup includes models for specific burner architectures: flame electrodes for Valupak-series burners (OVP 425–442M range and OVP 445–487M range), spark plugs in the Kinémax and standard reference series, and hardened electrodes in extended-length formats (such as the 14 mm × 25 m configuration). These components are rated for the electrical and thermal demands of ignition in pressurized combustion chambers, with designs suited to both standard and high-temperature operating envelopes. The product range covers both flame-detection electrodes—used to verify pilot or main flame presence—and spark-generation plugs for ignition initiation. Specifications such as electrode diameter, lead length, and connector type are matched to original equipment manufacturer (OEM) burner designs, ensuring mechanical and electrical compatibility.

Me

Mectron manufactures industrial oil pumps and fluid-transfer components engineered for burner systems, hydraulic circuits, and process-fluid applications across manufacturing, energy, and HVAC sectors. The product line centers on gear-type and positive-displacement pump designs rated for 7–15 bar operating ranges, compatible with 50/60 Hz AC supply, and specified to handle mineral oils across viscosity spans of 1.8–12 cSt. Typical configurations include 2800–3600 rpm motor ratings with coil voltages around 53 V, making them suitable for integration into burner fuel-supply chains, lubrication systems, and process-pump assemblies where consistent, moderate-pressure fluid delivery is required. Mectron components are built to industrial duty standards, with attention to pressure-relief characteristics and thermal stability in continuous-duty applications. Beyond primary pumps, the product family extends to auxiliary components—pump filters, air-damper actuators, and control assemblies—that support system reliability and maintenance accessibility. Technical selection emphasizes rated pressure, motor frequency compatibility, and fluid viscosity limits to ensure correct sizing for existing burner-control loops or retrofit pump installations. Quotations and detailed pressure–flow curves are available on request.

Na

Nanoclean manufactures water treatment chemicals and cleaning concentrates for industrial and facility-maintenance applications. The product range spans solar panel cleaners, air-conditioning and heat-exchanger foam cleaners, evaporator disinfectants, and specialized spray nozzles for precision application. Nanoclean formulations are designed for dilution at controlled ratios—typical ranges span 1:10 to 1:200 depending on application severity and delivery method (manual spray, pressure-fed systems, or immersion). The AC Foamclean line maintains vertical-surface foam adhesion for approximately 5 minutes, aiding contact time on fins and coils. Solar panel and photovoltaic maintenance products are marketed as biodegradable, supporting sustainability objectives in facility operations. Nanoclean supplies are held in warehouse inventory, enabling same-day dispatch for immediate availability. Plant engineers and maintenance teams source these concentrates for routine condenser cleaning, heat-exchanger descaling, solar array maintenance, and facility-wide air-handling disinfection.

Oe

Oertli is a Swiss manufacturer of welding electrodes and consumables serving industrial fabrication, maintenance, and repair operations. The company specializes in stick-electrode (SMAW) products engineered for consistent arc performance across carbon steel, stainless steel, and specialty alloy applications. Oertli's electrode range includes right-hand and left-hand configurations, block electrodes, and variants optimized for specific joint geometries and positional welding—addressing the consumables requirements of shipbuilding, structural steel, pipeline, and general metal fabrication sectors. The electrodes are manufactured to consistent dimensional and chemical specifications, ensuring predictable burn rate, slag behavior, and weld-bead profile across production runs. The product line reflects foundational SMAW electrode design—non-cored, flux-coated stick format—suitable for field repair, fabrication shops, and maintenance crews operating manual and semi-automatic welding stations.

Pa

Pactrol manufactures burner control systems and ignition modules for industrial combustion equipment. The product range spans flame-ignition controllers, spark-ignition units, control housings, and connector assemblies designed for atmospheric and forced-air burners across 10 kW to 60+ kW capacity. Pactrol controls are built to EN 298 standards and operate on 230V ±10% single-phase supply at 50 Hz, with typical specifications including 12 kV spark output, 10 MJ ignition energy, 100 ms flame appearance timing, and electrode gaps rated for 2.5–4 mm. The systems integrate time relays, flame detection relays, and electronic spark generators to manage ignition sequencing, flame verification, and safety shutdown. Pactrol's control architectures support both direct-spark and flame-relay-supervised ignition modes, with impedance and humidity ratings suitable for plant-floor environments up to 95% relative humidity. Inventory covers common reference numbers such as 406203, 400601/V03, and 404700 V11, enabling rapid replacement and retrofit support for installed burner systems. Technical documentation and spare-connector kits are available to support panel builders, OEMs, and maintenance teams across regional and international sites.

Pa

Parker Hannifin is a diversified manufacturer of motion and control technologies, supplying hydraulic, pneumatic, and electromechanical components across industrial, aerospace, and mobile equipment sectors. These components are engineered for industrial hydraulic circuits where reliable electromagnetic engagement is critical: construction equipment, manufacturing presses, injection molding machines, and material-handling systems. Parker solenoid coils are typically rated for AC or DC operation across standard voltage ranges (24V DC, 110V AC, 220V AC, 380V AC), with coil designs such as the ZH and ZB series offering different form factors, power ratings, and thermal characteristics to match specific valve body geometries and duty cycles. Beyond solenoids, the Parker hydraulic valve line supplied through 3G includes proportional directional control valves, pressure-relief cartridges, and pilot-operated check valves, all manufactured to ISO 1219 and CETOP mounting standards. Parker components are designed for system pressures typically ranging from pilot-operated low-flow applications (10 bar) to high-pressure industrial circuits (280+ bar), with repeatability and response characteristics suited to servo and proportional control loops.

PD

PDR manufactures industrial burners and combustion control equipment for medium to heavy-duty heating applications. The product line spans premix burners, atmospheric burners, and modular combustion systems rated across various fuel types (natural gas, LPG, oil) and thermal outputs. PDR burner assemblies are engineered for furnaces, boilers, process heaters, and thermal-processing equipment operating in manufacturing, metal treatment, ceramics, and chemical sectors. The range includes complete burner heads with integrated flame-supervision systems, as well as component spares—fan joints, gaskets, seals, mixture cones, sleeves, connectors, and viewing windows—that support field service and maintenance cycles. PDR designs to modular specifications, permitting configuration across fan assemblies, control interfaces, and mounting flanges to suit existing boiler and furnace installations. Spare-part reference codes (such as 050560, 050561, 301427, 310218, 300549Q) are documented and traceable, reducing procurement uncertainty on the maintenance side. For plants running dual or multi-fuel capability, PDR's mixture-cone assemblies and NG/LPG variants allow mid-life fuel-type conversion without full burner replacement. The technical scope ranges from compact Valupak units (sub-100 kW) through larger modular platforms (EB5, EB6/7 series) serving industrial furnaces.

Pr

Pratissoli is an Italian manufacturer of industrial positive-displacement pumps and pressure-control valves, part of the Interpump Group. The brand specializes in axial and radial piston pump designs rated from 130 to 400 bar, serving high-pressure hydraulic and fluid-handling applications across manufacturing, marine, construction, and industrial services. Product families include the SS, SN, and SN7193 series pumps, available in displacements and power ratings spanning 17.6 kW to 40 kW or higher, with flow capacities from 61 to 122 L/min. Complementing the pump range are pressure-regulating valves (R1, ZR1X, H168A models) and system accessories designed for compatibility across Pratissoli's modular lineup. All units are engineered to European industrial standards and operate reliably in continuous duty cycles. Technical specifications, pressure ratings, displacement data, and pump-valve compatibility information are provided on each product page to support procurement and cross-reference decisions. Engineering support for system integration and equipment selection is available to plant maintenance teams and OEM partners.

Pr

Preciman manufactures pressure and vacuum measurement instruments for industrial process control and equipment monitoring. The product line centers on mechanical pressure gauges and manometers available in multiple dial sizes (50–100 mm), pressure ranges (vacuum to 250 bar), and construction materials (glycerin-damped stainless steel, carbon steel, all-stainless). Gauges are supplied with axial or vertical connection orientations and standard thread ports (G1/4, G1/2) to integrate into boiler systems, steam lines, hydraulic circuits, and compressed-air networks. Preciman instruments use glycerin-filled housings or dry construction; glycerin damping reduces needle oscillation in pulsating pressure environments common in industrial burners and pump discharge lines. Dial faces are marked in bar, with color-coded zones available for quick operator reference. The instruments meet requirements for accuracy classes and repeatability in plant environments where corrosion resistance and vibration tolerance are essential. Inventory is maintained in with fast-dispatch capability to support planned maintenance schedules and emergency equipment replacement across Asia-Pacific and beyond. These gauges are specified in OEM boiler packages and aftermarket system upgrades where direct, analog pressure indication is required alongside or in place of electronic sensors.

Ri

Riello is an Italian combustion-equipment manufacturer specializing in oil burners, gas burners, and related control systems for industrial and commercial heating applications. The company produces a broad range of modulating and on-off burners rated for various fuel types and firing capacities, alongside comprehensive control electronics, flame-detection systems, and spare parts. Riello burner electronics typically incorporate ionization flame-detection technology (used in models such as the BS1 and BS2/3/4 series) or photocell-based detection, with control architectures designed for integration into larger heating plant systems. The Mectron product line represents a segment of Riello's equipment focused on modulation and mixed-fuel capability. Spare parts inventory—including electrode assemblies, solenoid valve actuators, and photocell sockets—reflects the installed base of Riello equipment across industrial process heating, commercial HVAC, and district heating installations. Technical specifications such as electrode gap tolerances, solenoid coil voltage ratings, and hose pressure ratings are available in product datasheets and should be verified against your specific burner model and control cabinet configuration before procurement.

Ro

Roca is a European heating-equipment manufacturer producing boiler components and controls for industrial and commercial thermal systems. The product line centres on replacement parts and assemblies for modular boiler installations, particularly the PCM series—a platform serving small to mid-scale heating applications across Europe and internationally. These parts are engineered to OEM specifications and cross-referenced by Roca part numbers (e.g. 122155360, 5699393, 057367) to ensure correct fit and function in service or retrofit scenarios. Typical applications include modular condensing boilers, heating loops, and domestic-scale hot-water systems where component reliability and availability directly impact uptime. Roca components are rated for standard EU operating pressures and temperatures; circulating pumps are available in 30W configurations, control modules support multi-stage ignition sequencing, and sensor packages include Q1 and Q2 temperature probes for primary and secondary circuit monitoring. The distributor model—stocking individual components rather than complete boiler units—allows maintenance teams and heating contractors to source exact replacements quickly without waiting for full-system lead times.

Sa

Satronic manufactures burner control systems and flame-detection equipment for industrial combustion applications. The product line centers on ignition controls, photocell flame sensors, and support transformers—components that manage the safe startup, operation, and shutdown of gas and oil burners in boilers, furnaces, and related heating equipment. Satronic controls are engineered to meet European safety standards and are deployed across industrial, commercial, and institutional installations requiring reliable flame supervision and automated burner sequencing. The MZ770S and IRD820 photocell families form the core of Satronic's flame-detection portfolio, detecting infrared radiation from the flame front and transmitting a signal to the control module to confirm combustion. Supporting components include ignition transformers (such as the ZT870 and ZT931 series) that supply high-voltage ignition energy, and connector assemblies that integrate photocell and transformer signals into the main control loop. The distributor supports plant engineers and maintenance teams with next-day order fulfillment from its hub, technical datasheets, cross-reference guides, and expedited replacement-parts logistics. Satronic equipment is specified in applications requiring flame-fail safety certification, such as steam boilers, air heaters, and industrial process burners where combustion supervision is mandatory. Engineers select Satronic controls when existing installations use Satronic architecture and when standardizing on a single control supplier reduces troubleshooting complexity and inventory overhead.

Sa

Saunier Duval is a European boiler and heating-control manufacturer with a long operational history in residential and light commercial thermal systems. The brand manufactures condensing boilers, wall-hung units, and integrated heating appliances, alongside a comprehensive range of spare parts and control components. These components are engineered to OEM specifications and carry part numbers traceable to original equipment documentation. The spare-parts catalog supports maintenance and repair workflows for existing Saunier Duval installations across facilities in Southeast Asia and beyond. Components are stocked in and available for same-day dispatch from the Woodlands warehouse, enabling rapid turnaround for plant engineers and service technicians managing heating-system downtime. Saunier Duval controls and sensors operate across standard industrial pressure ratings, temperature ranges, and electrical specifications typical of European boiler standards. The product range emphasizes interchangeability and part-number consistency, allowing procurement teams to source replacements with confidence in fit and function. Technical documentation and cross-reference data are available upon request to support specification verification and system diagnostics.

Si

Siemens manufactures combustion controls, flame detectors, and building automation equipment for industrial heating and HVAC systems. Siemens combustion controls operate across voltage standards (24V AC/DC and 230V AC configurations) and are designed for integration into larger HVAC, heating, and process control installations. The GMA series damper actuators provide rotary positioning with defined torque ratings (typically 2–10 Nm) and adjustable spring-return timing, suitable for air-handling and duct-damper applications. Flame-detection modules such as the QRB series photoelectric sensors and UV-based variants detect ignition status in gas and oil burner systems, with response specifications in the sub-second range. Gas-controller units (RMG and LFM series) manage fuel regulation and interlock logic in burner sequences, often supplied as part of modular control assemblies. Control boxes (LGB and LME families) serve as interface nodes between field devices and operator panels, featuring multiple relay outputs and diagnostic terminals. Siemens equipment typically carries CE marking and conforms to European industrial standards for electromagnetic compatibility and functional safety. The typical application involves integration into packaged burner units or retrofit into existing HVAC plant where OEM replacement parts or upgraded control logic are required.

SI

SIT is an Italian manufacturer of gas-control components and burner-system parts with a product portfolio spanning pilot lights, thermocouples, gas injectors, solenoid valves, and integrated control blocks. The company has established itself as a supplier of modular gas-safety components used in industrial and commercial burner installations across Europe and globally. SIT components are commonly found in heating systems, cooking appliances, and industrial combustion equipment where repeatable ignition, flame detection, and gas flow regulation are required.

SU

Sudick manufactures ignition and control systems for industrial burners, serving plant engineers and maintenance teams across petrochemical, power generation, and manufacturing sectors. The product range includes ignition transformers, flame-safeguard controllers, and modulation units designed to operate in high-temperature combustion environments. Sudick controllers—such as the LMO and LOA series—integrate burner safety interlocks, flame supervision, and fuel-flow modulation in compact DIN-rail or wall-mount housings rated for continuous duty in industrial plants. Ignition transformers like the 1020 model provide high-voltage spark generation for reliable pilot ignition across varying fuel types and burner configurations. These components operate within thermal and electrical specifications suited to installations requiring European build standards and CE compliance. Typical lead times and availability are managed through our Woodlands distribution hub, with technical documentation and compatibility guidance available to procurement and engineering teams. Whether specified as original replacement parts or integrated into refurbished burner packages, Sudick controllers and ignition equipment function in applications ranging from small industrial boilers to large-capacity thermal systems.

Su

Suntec manufactures fuel and oil pumps for industrial burners, heating systems, and combustion equipment. The product range includes gear pumps, fuel-supply units, and associated control components designed for reliable operation in heating installations and industrial burner applications. Suntec pumps are engineered to handle fuel-oil delivery at controlled pressures and flow rates, with models available across multiple displacement capacities and electrical configurations. The AUV series represents a core product family, offered in variants such as the AUV 47L and AUV 47R, each rated for 220–240 V AC at 50/60 Hz operation. These units feature selectable nozzle outlet positions (left or right), integrated filtration, and flow characteristics defined by manufacturer curves—specifications critical for matching pump performance to specific burner requirements. Suntec also supplies replacement fuel pumps (AFG, AS47, E6NA variants) and coupling assemblies, enabling maintenance teams to source exact spare parts for field repairs and system commissioning. The product line caters to plant engineers and maintenance managers specifying fuel-delivery systems, as well as procurement teams sourcing compatible components for legacy or current heating and burner installations. Technical documentation, model-number cross-references, and flow-curve data are available to support selection and troubleshooting, ensuring that pressure and capacity requirements align with application demands.

Su

Supco manufactures electrical controls, refrigerant service tools, and diagnostic equipment for HVAC and refrigeration systems. The product portfolio spans compressor starters, hard-start devices, relays, service valves, and temperature monitoring instruments—components that field technicians and maintenance teams integrate into commercial and light industrial cooling circuits. Supco controls carry certifications including VDE for European compliance and are rated across standard voltage classes (115/230 VAC) and amperage ranges (1/12 hp through multi-ton compressor protection). The starter modules, such as the CSS-25U progressive unit, employ potential-relay and three-wire mechanical designs to manage inrush current and provide soft-start or instant-restart functionality depending on application requirements. Service-side tooling includes piercing valves, perforator cocks, and compressor doors—standardized in 1/4", 5/16", 3/8", 1/2", and 5/8" outlets to fit common refrigerant line diameters. Beyond controls and valves, Supco offers data-logging instruments like the SL300TH, which record temperature and humidity with configurable sampling intervals, tamper-proof archiving, and battery autonomy exceeding 20 months, supporting compliance and performance verification in temperature-critical environments. The product range reflects standard HVAC design practices rather than proprietary technology, making Supco components compatible across OEM brands in the commercial refrigeration and light industrial cooling sector.

TG

TG manufactures temperature-sensing and control devices for industrial heating, cooling, and process applications. The product range centers on capillary thermostats, aquastats, rectangular thermometers, and sealed thermostat housings—components engineered for boiler systems, hydronic circuits, and fluid-temperature monitoring in plant environments. TG thermostats are specified with defined temperature ranges (typically −35 to +120°C depending on model), IP ratings up to IP55 for sealed variants, and contact ratings suited to switching and control circuits (commonly 16 A at 250V). Capillary sensing elements are available in stainless steel construction with lengths from 1 m to 3 m, allowing remote bulb placement in confined or hazardous locations. Models differentiate by adjustment method (internal, external, or fixed), reset type (automatic or manual), and differential settings (typically 2±1°C to 45°C depending on application). TG's aquastats address safety and limit-control functions in boiler plants, with manual-reset variants calibrated to specific cutout temperatures and adjustable differential ranges. Sealed housings (IP55-rated) accommodate external wiring and mounting in wet or dusty environments. Rectangular thermometer variants provide direct temperature indication without electrical switching, suitable for visual process monitoring. Product specifications are publicly documented to support procurement and engineering selection.

Va

Vaillant is a German manufacturer of heating and hot-water systems with a product portfolio spanning condensing boilers, heat pumps, solar thermal components, and associated controls. The brand operates across residential and light commercial applications, with boiler product lines including the VC, VCW, VM, VMW, WM, and WMW series—each designed for specific heating capacity and installation configurations. These parts are designated to original Vaillant equipment specifications, enabling technicians and maintenance teams to maintain system performance and compliance with manufacturer design standards. The spare-parts inventory covers both older and current generation boiler models, with each component cross-referenced to Vaillant part numbers for precise identification. Vaillant boiler systems operate across heating and domestic hot-water circuits, necessitating reliable supply chains for differential switches, pressure relief mechanisms, and circulation pump assemblies that regulate flow and pressure stability. The modular design of Vaillant boilers means individual components—locking clips, check valves, electronic control boards—can be sourced and replaced without requiring full-unit replacement, supporting cost-effective equipment maintenance.

Vi

Vivaldi manufactures packaged air-conditioning (PAC) and heat pump units across a range of capacities from 2.32 kW to 27 kW, serving small residential through medium commercial applications. The brand organizes its lineup into named series—Opera, Concerto, Picolo, Harmonie, Crescendo, and Symphonie—each targeting specific duty cycles and installation scenarios. Most units in the Vivaldi range feature inverter-driven compressors (marked as Inv or Full Inv in model designations), which modulate cooling or heating output to match actual load rather than cycling on/off at fixed capacity. This approach reduces energy consumption and improves temperature stability in variable-load environments. Vivaldi PAC units are configured for either cooling-only or heat pump operation (heating and cooling), with capacities typically rated in the 5–15 kW band for standard commercial installations and smaller units down to 2.32 kW for supplemental or localized conditioning. The Crescendo series extends into higher capacities, with the CX160T reaching 27 kW for larger floor-plate or multi-zone applications. Technical specifications—rated cooling/heating capacity, seasonal efficiency coefficients, refrigerant type, sound pressure levels, and electrical input requirements—are published per model to enable procurement teams to match equipment to facility load calculations and power infrastructure. Vivaldi units are supplied as sealed, factory-tested assemblies, reducing on-site commissioning complexity.

Wa

Watts is a manufacturer of fluid control and safety products serving industrial, commercial, and residential applications globally. The company specializes in gas regulation equipment, pressure management systems, water controls, and heating components. Across industrial burner installations, boiler systems, and process gas delivery, Watts products are engineered to handle precise flow control, filtration, and pressure reduction in demanding environments.