Send a part number, a photo, or a whole BOM — we supply it and stand behind it. Worldwide shipping to 80+ countries.

3G Electric
RFQ CartGet a QuoteSign inSign up

BAKER INSTRUMENTS

Baker Instruments is a manufacturer of pressure calibration and wire measurement tools, serving industrial maintenance, HVAC, and electrical contracting sectors. The company's product line centers on analog pressure calibrators and mechanical wire measurers, designed for field and shop-floor use where reliable, repeatable measurements are required without reliance on battery power or digital interfaces. The pressure calibrator range includes models such as the B1600 and B1800, which measure in inches of water column (in H2O) and pounds per square inch gauge (psig), respectively. These units feature squeeze-bulb actuation, carrying cases, and flexible hoses with threaded fittings, and are offered with or without NIST-traceable calibration certificates. Accuracy specifications for these calibrators are stated as +/-2% to 1.5% to 2% of full scale, depending on the model. The wire measurer line is centered on the B7000 series, a mechanical device that measures flexible wires and metal cables in inches. Accessories include replacement counters (B7000-RC) and a dedicated stand (B70X0-STAND) for benchtop or field use. Baker Instruments products are built for durability and simplicity, with no intrinsic safety ratings listed for the calibrators, indicating they are intended for general-purpose industrial environments. 3G Electric stocks a selection of Baker Instruments pressure calibrators and wire measurers, including both standard and NIST-certified variants, along with replacement parts and accessories. This allows procurement specialists and maintenance managers to source complete calibration kits or individual components for existing equipment. The analog nature of these tools makes them suitable for applications where digital electronics may be impractical or where a straightforward mechanical reference is preferred. By offering these products through its global distribution network, 3G Electric supports plant engineers and technicians who require dependable measurement instruments for routine pressure checks, cable length verification, and system troubleshooting.

Genuine
OEM Parts
Expert
Tech Support
1 Day
Quote Response
Worldwide
Origin
Worldwide Shipping
Air & sea freight
Datasheets on Request
Technical specs & drawings
1-Day Quote Response
Singapore-based team
Browse:
Show
Page 1 of 1

About BAKER INSTRUMENTS

Baker Instruments is a manufacturer of pressure calibration and wire measurement tools, serving industrial maintenance, HVAC, and electrical contracting sectors. The company's product line centers on analog pressure calibrators and mechanical wire measurers, designed for field and shop-floor use where reliable, repeatable measurements are required without reliance on battery power or digital interfaces. The pressure calibrator range includes models such as the B1600 and B1800, which measure in inches of water column (in H2O) and pounds per square inch gauge (psig), respectively. These units feature squeeze-bulb actuation, carrying cases, and flexible hoses with threaded fittings, and are offered with or without NIST-traceable calibration certificates. Accuracy specifications for these calibrators are stated as +/-2% to 1.5% to 2% of full scale, depending on the model. The wire measurer line is centered on the B7000 series, a mechanical device that measures flexible wires and metal cables in inches. Accessories include replacement counters (B7000-RC) and a dedicated stand (B70X0-STAND) for benchtop or field use. Baker Instruments products are built for durability and simplicity, with no intrinsic safety ratings listed for the calibrators, indicating they are intended for general-purpose industrial environments. 3G Electric stocks a selection of Baker Instruments pressure calibrators and wire measurers, including both standard and NIST-certified variants, along with replacement parts and accessories. This allows procurement specialists and maintenance managers to source complete calibration kits or individual components for existing equipment. The analog nature of these tools makes them suitable for applications where digital electronics may be impractical or where a straightforward mechanical reference is preferred. By offering these products through its global distribution network, 3G Electric supports plant engineers and technicians who require dependable measurement instruments for routine pressure checks, cable length verification, and system troubleshooting.

Common Applications

  • HVAC system pressure testing — Baker Instruments B1800 pressure calibrator for verifying duct static pressure and gas line pressure.
  • Electrical cable length verification — Baker Instruments B7000 wire measurer for measuring flexible wires and metal cables during installation or inventory.
  • Industrial burner pressure adjustment — Baker Instruments B1600 calibrator for checking low-pressure gas or air settings in combustion systems.
  • Maintenance shop calibration checks — Baker Instruments B1800-NIST for periodic verification of pressure gauges and transmitters.
  • Field service wire measurement — Baker Instruments B7000 with B70X0-STAND for benchtop cable length measurement in repair depots.
  • Pump system pressure diagnostics — Baker Instruments B1600-NIST for measuring differential pressure across filters or valves.

Frequently asked questions

Common questions about BAKER INSTRUMENTS from 3G Electric.

What pressure ranges do Baker Instruments B1600 and B1800 calibrators cover?

The Baker Instruments B1600 pressure calibrator measures in inches of water column (in H2O) with a range of 0 to 5.77 psi, while the B1800 measures in psig with a range of 0 to 18 psi. Both models use a squeeze-bulb mechanism to generate pressure and include a carrying case, flex hose, and threaded fitting. Accuracy is specified as +/-2% to 1.5% to 2% of full scale.

Does the Baker Instruments B7000 wire measurer require calibration?

The B7000 wire measurer is a mechanical device that measures flex wires and metal cables in inches. It does not include a certificate of calibration as standard. For applications requiring traceable measurements, users should verify if a calibration certificate is needed separately. The unit is designed for direct mechanical reading without electronic components.

What accessories are available for the Baker Instruments B7000 wire measurer?

Baker Instruments offers a replacement counter (model B7000-RC) and a stand (model B70X0-STAND) for the B7000 wire measurer. The replacement counter allows field servicing of the measuring mechanism, while the stand provides stable mounting for benchtop or handheld use. These accessories are compatible with the B7000 series.

Are Baker Instruments pressure calibrators intrinsically safe?

Based on available specifications, Baker Instruments pressure calibrators such as the B1600 and B1800 are not listed as intrinsically safe. They are designed for general-purpose industrial environments where explosive atmospheres are not present. Users should consult the product documentation for specific safety ratings and application limitations.

Can I get a NIST-traceable calibration certificate for Baker Instruments calibrators?

Yes, Baker Instruments offers NIST-traceable versions of their pressure calibrators, such as the B1600-NIST and B1800-NIST. These models include a certificate of calibration traceable to NIST standards. Standard models (without -NIST suffix) do not include a calibration certificate. 3G Electric stocks both variants.

Does 3G Electric supply BAKER INSTRUMENTS products?

Yes — 3G Electric (S) Pte. Ltd. supplies BAKER INSTRUMENTS products. We stock the BAKER INSTRUMENTS catalog and supply genuine factory-original products with full manufacturer warranty and technical support.