GREENLEE PVC

The Greenlee 849 PVC pipe heater accommodates pipe sizes from 1/2 inch to 2 inches. It operates on 120 V AC and has a wattage of 3,000 W. The preheat time is 10 minutes. This model is designed for bending PVC conduit and pipe in electrical and plumbing installations. It uses a Calrod heating element to apply heat evenly. The 849 is suitable for on-site bending where a range of pipe sizes is needed. When using this heater, ensure the pipe is properly inserted and heated for the full preheat time to achieve a smooth bend without kinking. Always follow the manufacturer's operating instructions for safe use.

Greenlee PVC pipe heaters, such as the 849 model, are open heating devices that accommodate a range of pipe sizes, typically from 1/2 inch to 2 inches. They use a Calrod heating element and require a preheat time, such as 10 minutes. PVC pipe blankets, like the 860-4 and 860-1-1/2, are flexible heating blankets that wrap around the pipe. They are available for specific pipe size ranges: the 860-4 for 3-1/2 inch to 4 inch pipe, and the 860-1-1/2 for 1/2 inch to 1-1/2 inch pipe. Blankets include a 5 ft power cord and operate on 120 V AC. Both types soften PVC for bending, but blankets are often used for larger or specific pipe sizes where a wrap-around heat source is preferred.

Greenlee PVC heating blankets, including models 860-4 and 860-1-1/2, operate on 120 V AC. This is standard for many North American job sites. The blankets include a 5 ft power cord. Ensure that the power source matches the voltage requirement and that the circuit can handle the current draw. Using an incorrect voltage can damage the blanket and pose a safety hazard. Always inspect the cord and blanket for damage before use. These blankets are designed for heating PVC pipe prior to bending or forming. They should be used in accordance with the manufacturer's instructions and local electrical codes.

No, Greenlee PVC pipe blankets are designed for specific pipe size ranges. For example, the 860-4 model accommodates pipe sizes from 3-1/2 inches to 4 inches, while the 860-1-1/2 model accommodates 1/2 inch to 1-1/2 inches. Using a blanket on a pipe outside its specified range may result in uneven heating or damage to the blanket. It is important to select the correct model for the pipe size you are working with. If you need to heat multiple pipe sizes, you may require more than one blanket or a pipe heater that covers a broader range, such as the 849 heater for 1/2 inch to 2 inch pipe.

The Greenlee 849 PVC pipe heater has a preheat time of 10 minutes. This is the time required for the heater to reach operating temperature and for the pipe to soften sufficiently for bending. Actual heating time may vary based on ambient conditions and pipe thickness. It is recommended to follow the manufacturer's guidelines for preheat time to achieve proper bends without compromising the pipe. The 849 operates on 120 V AC and draws 3,000 W. Ensure the power supply can handle this load. Always use appropriate personal protective equipment when handling heated pipe.

3G Electric supplies Greenlee PVC pipe heaters and blankets as part of its industrial equipment catalog. We offer global logistics support, so customers can procure these products regardless of their location. Our catalog includes models such as the 849 pipe heater and the 860-4 and 860-1-1/2 blankets, with detailed specifications. We do not manufacture these products; we distribute them and can assist with part number identification and availability. For a quote or to check stock, contact our sales team. We aim to provide accurate information and efficient order fulfillment for maintenance, electrical, and plumbing professionals.