Send a part number, a photo, or a whole BOM — we supply it and stand behind it. Worldwide shipping to 80+ countries.

settings

Power Transmission

Power transmission components — bearings, belts, chains, couplings, gearboxes and sprockets that keep rotating machinery running.

Genuine

OEM Parts

Expert

Tech Support

1 Day

Quote Response

Worldwide

Shipping

Get a Quote WhatsApp Sales Telegram Sales

Worldwide Shipping

Air & sea freight

Datasheets on Request

Technical specs & drawings

1-Day Quote Response

Singapore-based team

Show

Page 4492 of 4547

BOSTON GEAR Speed Reducer: 20:1, 88 RPM, 0.25 hp Input Max, 138 in-lb Output Max, Round (MPN 710-20-G). Key specifications — attr85418: BOSTON GEAR.

BOSTON GEAR Speed Reducer: 20:1, 88 RPM, 0.25 hp Input Max, 138 in-lb Output Max

BrandBOSTON GEAR

Sign inAvailable

This food-grade flange-mount ball bearing features a stainless steel housing and set screw locking for secure shaft mounting. It has a 1 in bore, 2 3/4 in length, and uses Mobil FM222 lubricant. The mounting bolt size is 5/8 in. Typical applications include conveyors, packaging lines, and processing equipment where washdown resistance is required.

IPTCI BEARINGS SUCSFB205-16 Food-Grade Flange-Mount Ball Bearing

BrandIPTCI BEARINGS

Sign inAvailable

C Section V-belt with polyester construction. Outside length 118 in, top width 7/8 in, thickness 17/32 in. Used in industrial power transmission applications such as compressors, pumps, and conveyors.

GATES C114 C Section V-Belt, 118 in Outside Length, 7/8 in Top Width, Polyester

BrandGATES

Sign inAvailable

NTN Pillow Block Bearing: 1 7/8 in Bore, Cast Iron, Eccentric Collar, 2 3/16 in Shaft Ht

BrandNTN

Sign inAvailable

This plain-bore timing pulley with hub is designed for synchronous belt drive systems requiring precise power transmission. It features a 14 mm pitch, 30 teeth, and a 1 in bore diameter, constructed from steel. Suitable for use with 105 mm wide belts in industrial applications such as conveyors and packaging machinery.

CONTINENTAL SilentSync Plain-Bore Timing Pulley with Hub

BrandCONTINENTAL

Sign inAvailable

Metric 316 stainless steel precision ground rotary shaft with 4 mm diameter, -0.005 mm tolerance, 600 mm overall length, chamfered ends, and 79HRB hardness. Used in motion control systems, conveyor drives, and precision indexing applications requiring corrosion resistance and tight tolerances.

ONDRIVES.US Metric 316 Stainless Steel Precision Ground Rotary Shaft

BrandONDRIVES.US

Sign inAvailable

This TSUBAKI roller chain is a single-strand, 06B British standard chain made of stainless steel for corrosion resistance. It has a 3/8 in pitch, 10 ft overall length, and riveted pin construction. Suitable for power transmission and conveying in environments where standard carbon steel chains would corrode.

TSUBAKI Stainless Steel British Standard Roller Chain

BrandTSUBAKI

Sign inAvailable

Fixed-bore timing pulley with hub for GT section timing belts. Features a clear anodized finish and accommodates 9 mm belt width. Suitable for synchronous drive systems requiring precise motion transfer in industrial machinery such as conveyors and packaging equipment.

Dayton GT Section Fixed-Bore Timing Pulley with Hub

BrandDayton

Sign inAvailable

12V DC linear actuator with 100 lbf rated load and 8 in stroke. Plastic nut material. IP50 rated. Suitable for push-pull motion in industrial automation, material handling, and equipment adjustment.

DUFF-NORTON TMD01 Linear Actuator, 100 lbf, 8 in Stroke, 12V DC, IP50

BrandDUFF-NORTON

Sign inAvailable

This straight jaw coupling hub is designed for general purpose power transmission applications, connecting two rotating shafts in industrial machinery, conveyors, and pumps. It has an outside diameter of 4 1/2 inches and an overall length of 5 1/4 inches.

Dayton General Purpose Straight Jaw Coupling Hub

BrandDayton

Sign inAvailable

← Prev 1…4490 4491 4492 4493 4494…4547 Next →