Send a part number, a photo, or a whole BOM — we supply it and stand behind it. Worldwide shipping to 80+ countries.

3G Electric
RFQ CartGet a QuoteSign inSign up

Osg 3G-OTH-279223 — Compatible Parts & Alternatives

You searched for 28732050

13 compatible products found for Osg 3G-OTH-279223. All items ship worldwide via DHL.

Also known as:28732050OSG

Cross-reference match for “28732050”

“28732050” reads like a competitor / OEM part number. The 3G-catalog equivalent is below. Not an exact fit? Our global supplier network covers thousands of brands — add it to an RFQ and we’ll quote it.

OSG 28732050 Reduced-Neck Carbide Square End Mill for Aluminum, DLC Coated, 3/4" Dia, 1-1/8" LOC, 4" OAL, 3 Flute
OSG

OSG 28732050 Reduced-Neck Carbide Square End Mill for Aluminum, DLC Coated, 3/4" Dia, 1-1/8" LOC, 4" OAL, 3 Flute

SKU: 3G-OTH-279223
Available by RFQQuote + Service

More from Osg

12 other Osg products in the same range

Osg This OSG square end mill is made of carbide with a reduced-neck design, featuring 2 flutes and a 1/2" cutting diameter. It has a 1/2" length of cut and 3" overall length, suitable for high-speed milling of aluminum and non-ferrous materials. The geometry promotes efficient chip evacuation and fine surface finishes in general machining applications.
Osg

Osg This OSG square end mill is made of carbide with a reduced-neck design, featuring 2 flutes and a 1/2" cutting diameter. It has a 1/2" length of cut and 3" overall length, suitable for high-speed milling of aluminum and non-ferrous materials. The geometry promotes efficient chip evacuation and fine surface finishes in general machining applications.

SKU: 3G-OTH-279192
Available by RFQQuote + Service
Osg This OSG square end mill is made from carbide for wear resistance in aluminum and non-ferrous machining. It features a 1/4" cutting diameter, 1/4" length of cut, 2-1/2" overall length, and 3-flute geometry. The reduced-neck design enables deep cavity milling with efficient chip evacuation and fine surface finishes.
Osg

Osg This OSG square end mill is made from carbide for wear resistance in aluminum and non-ferrous machining. It features a 1/4" cutting diameter, 1/4" length of cut, 2-1/2" overall length, and 3-flute geometry. The reduced-neck design enables deep cavity milling with efficient chip evacuation and fine surface finishes.

SKU: 3G-OTH-279222
Available by RFQQuote + Service
Osg This reduced-neck carbide square end mill is designed for high-speed machining of aluminum and non-ferrous materials. Its 3-flute geometry and 5/8" diameter enable efficient chip evacuation and fine surface finishes in milling applications. The reduced-neck design facilitates deep cavity work, making it suitable for general manufacturing and automotive or aerospace component production.
Osg

Osg This reduced-neck carbide square end mill is designed for high-speed machining of aluminum and non-ferrous materials. Its 3-flute geometry and 5/8" diameter enable efficient chip evacuation and fine surface finishes in milling applications. The reduced-neck design facilitates deep cavity work, making it suitable for general manufacturing and automotive or aerospace component production.

SKU: 3G-OTH-279114
Available by RFQQuote + Service
Osg This OSG square end mill is made from carbide with a reduced-neck design for deep reach. It has a 3/4" cutting diameter, 3/4" length of cut, and 6" overall length with 3 flutes. Suitable for high-speed machining of aluminum and non-ferrous materials in production milling applications.
Osg

Osg This OSG square end mill is made from carbide with a reduced-neck design for deep reach. It has a 3/4" cutting diameter, 3/4" length of cut, and 6" overall length with 3 flutes. Suitable for high-speed machining of aluminum and non-ferrous materials in production milling applications.

SKU: 3G-OTH-279120
Available by RFQQuote + Service
Osg This OSG carbide square end mill features a reduced-neck design for deep cavity machining. With a 1/4" cutting diameter, 1/4" length of cut, and 4" overall length, it is suited for high-speed milling of aluminum and non-ferrous materials. The 3-flute geometry promotes efficient chip evacuation and fine surface finishes in CNC applications.
Osg

Osg This OSG carbide square end mill features a reduced-neck design for deep cavity machining. With a 1/4" cutting diameter, 1/4" length of cut, and 4" overall length, it is suited for high-speed milling of aluminum and non-ferrous materials. The 3-flute geometry promotes efficient chip evacuation and fine surface finishes in CNC applications.

SKU: 3G-OTH-279169
Available by RFQQuote + Service
Osg This carbide square end mill features a DLC coating to reduce friction and built-up edge during high-speed machining of aluminum and non-ferrous materials. The reduced-neck design enables deep cavity milling. With 3 flutes and a 5/8" mill diameter, 1" length of cut, and 4" overall length, it is suited for finishing and roughing operations in general manufacturing.
Osg

Osg This carbide square end mill features a DLC coating to reduce friction and built-up edge during high-speed machining of aluminum and non-ferrous materials. The reduced-neck design enables deep cavity milling. With 3 flutes and a 5/8" mill diameter, 1" length of cut, and 4" overall length, it is suited for finishing and roughing operations in general manufacturing.

SKU: 3G-OTH-279115
Available by RFQQuote + Service
Osg Carbide square end mill with reduced-neck design for deep slotting and high-speed machining of aluminum and non-ferrous materials. Three-flute geometry promotes efficient chip evacuation. Suitable for general milling applications in fabrication and production environments.
Osg

Osg Carbide square end mill with reduced-neck design for deep slotting and high-speed machining of aluminum and non-ferrous materials. Three-flute geometry promotes efficient chip evacuation. Suitable for general milling applications in fabrication and production environments.

SKU: 3G-OTH-279190
Available by RFQQuote + Service
Osg This OSG square end mill is made of carbide with a reduced-neck design for deep pocketing. It has 2 flutes, a 1/4" cutting diameter, 1/4" length of cut, and 2-1/2" overall length. Optimized for high-speed machining of aluminum and non-ferrous materials, it is used for slotting, profiling, and contouring applications.
Osg

Osg This OSG square end mill is made of carbide with a reduced-neck design for deep pocketing. It has 2 flutes, a 1/4" cutting diameter, 1/4" length of cut, and 2-1/2" overall length. Optimized for high-speed machining of aluminum and non-ferrous materials, it is used for slotting, profiling, and contouring applications.

SKU: 3G-OTH-279171
Available by RFQQuote + Service
Osg This reduced-neck carbide square end mill is designed for high-speed machining of aluminum and non-ferrous materials. Its 2-flute geometry and 3/4" diameter enable efficient chip evacuation and smooth finishes in slotting, profiling, and contouring applications. The reduced-neck design allows for deep cavity machining.
Osg

Osg This reduced-neck carbide square end mill is designed for high-speed machining of aluminum and non-ferrous materials. Its 2-flute geometry and 3/4" diameter enable efficient chip evacuation and smooth finishes in slotting, profiling, and contouring applications. The reduced-neck design allows for deep cavity machining.

SKU: 3G-OTH-279153
Available by RFQQuote + Service
Osg This OSG square end mill is made of carbide with a DLC coating and features a reduced-neck design. It has a 3/4" mill diameter, 1.142" length of cut, 4" overall length, and 3 flutes. Suitable for high-speed machining of aluminum and non-ferrous materials in slotting, profiling, and finishing operations.
Osg

Osg This OSG square end mill is made of carbide with a DLC coating and features a reduced-neck design. It has a 3/4" mill diameter, 1.142" length of cut, 4" overall length, and 3 flutes. Suitable for high-speed machining of aluminum and non-ferrous materials in slotting, profiling, and finishing operations.

SKU: 3G-OTH-279167
Available by RFQQuote + Service
Osg This reduced-neck carbide square end mill is designed for machining aluminum and non-ferrous materials. The DLC coating reduces friction and built-up edge. With 3 flutes, a 3/8" mill diameter, 7/8" length of cut, and 3" overall length, it is suitable for finishing and roughing operations.
Osg

Osg This reduced-neck carbide square end mill is designed for machining aluminum and non-ferrous materials. The DLC coating reduces friction and built-up edge. With 3 flutes, a 3/8" mill diameter, 7/8" length of cut, and 3" overall length, it is suitable for finishing and roughing operations.

SKU: 3G-OTH-279133
Available by RFQQuote + Service
Osg Carbide square end mill with DLC coating and reduced-neck design for deep cavity machining. 3-flute geometry for efficient chip evacuation in aluminum and non-ferrous materials. Mill diameter 1/2", length of cut 3/4", overall length 4". Suitable for slotting, profiling, and finishing operations.
Osg

Osg Carbide square end mill with DLC coating and reduced-neck design for deep cavity machining. 3-flute geometry for efficient chip evacuation in aluminum and non-ferrous materials. Mill diameter 1/2", length of cut 3/4", overall length 4". Suitable for slotting, profiling, and finishing operations.

SKU: 3G-OTH-279166
Available by RFQQuote + Service