5354465 — Cross-Reference

Our equivalent: Walter 3G-OTH-257036

13 compatible products found for Walter 3G-OTH-257036. All items ship worldwide via DHL.

Also known as:5354465WALTER

Cross-reference match for “5354465”

“5354465” reads like a competitor / OEM part number. The 3G-catalog equivalent is below. Not an exact fit? Our global supplier network covers thousands of brands — add it to an RFQ and we’ll quote it.

WALTER

WALTER CNMG432-NM4 WSM30 / CNMG120408-NM4 WSM30 Diamond Indexable Turning Insert

SKU: 3G-OTH-257036

Available by RFQQuote + Service

5354465 — Cross-Reference

Cross-reference match for “5354465”

WALTER CNMG432-NM4 WSM30 / CNMG120408-NM4 WSM30 Diamond Indexable Turning Insert

More from Walter

Walter Diamond indexable turning inserts for precision machining of non-ferrous materials, composites, and abrasive plastics. Available in two geometries: VCGT331-FM2 WSM10S and VCGT160404-FM2 WSM10S. The diamond grade provides high wear resistance and consistent cutting performance.

Walter Diamond indexable turning inserts for precision machining of non-ferrous materials, composites, and abrasive alloys. Suitable for fine finishing and medium turning operations, delivering high surface finish and extended tool life in general machining applications.

Walter Diamond indexable turning inserts for precision machining of non-ferrous materials, composites, and abrasive workpieces. Available in geometries CNGG431-MS3 WSM01 and CNGG120404-MS3 WSM01. Suitable for turning operations requiring high wear resistance and surface finish.

Walter Diamond indexable turning inserts for precision machining of hard, abrasive materials. Suitable for finishing and semi-finishing operations where tight tolerances and surface quality are required. Available in CNMG433-NRS and CNMG120412-NRS geometries with WSM30S grade.

Walter Diamond indexable turning insert with CCMT geometry, PS4 chipbreaker, and WAK10 diamond grade. Used for turning operations on non-ferrous materials, composites, and abrasive alloys.

Walter Diamond indexable turning insert for precision turning and finishing of non-ferrous materials such as aluminum alloys, copper, and plastics. Available in designations CPMT1.5(1.2)1-MM4 and CPMT04T104-MM4. Suitable for fine finishing operations in general machining applications.

Walter Diamond indexable turning insert available in CCMT3(2.5)1-MM4 and CCMT09T304-MM4 geometries, both with WSM20S grade. Used for precision turning of non-ferrous materials, composites, and abrasive alloys in general machining applications.

Walter Diamond indexable turning insert for finish machining of non-ferrous materials, composites, and hardened steels. Features FM4 geometry and WSM20S grade for sharp cutting edges and wear resistance. Suitable for precision turning operations in general engineering applications.

Walter Diamond indexable turning inserts for precision turning operations. Suitable for finishing and semi-finishing of non-ferrous materials, composites, and plastics in industrial machining. Available in two geometries: DCGW3(2.5)1EM-2 and DCGW11T304EM-2.

Walter Diamond indexable turning inserts for precision machining of non-ferrous materials. Available in two geometries: CCMT3(2.5)2-PM5 WAK20 and CCMT09T308-PM5 WAK20, both in grade WAK20. Suitable for turning operations on aluminum alloys and composites.

Walter Diamond indexable turning inserts for precision machining of non-ferrous metals, composites, and abrasive plastics. Available in two variants: DCGW3(2.5)2EM-2 and DCGW11T308EM-2, each suited for different cutting depths and feed rates.