APPROVED VENDOR Concrete Anchor Screw: 1 1/4 in Overall Lg, 3/16 in Dia, Steel, Blue Ruspert
The APPROVED VENDOR Concrete Anchor Screw is a hex-head screw anchor with a 1 1/4 in overall length and 3/16 in diameter. This case-hardened, self-tapping screw is removable and comes in a 100-pack of steel with a…
SKU 3G-OTH-540294
Need installation or engineering help?
Ask a question
Product Description
The APPROVED VENDOR Concrete Anchor Screw is a hex-head screw anchor with a 1 1/4 in overall length and 3/16 in diameter. This case-hardened, self-tapping screw is removable and comes in a 100-pack of steel with a Blue Ruspert finish. 3G Electric interprets your demand for fastening solutions across 14 industrial departments — and we supply far more than is listed — with specialist depth in combustion, pumps and controls as a trust anchor.
Frequently Asked Questions
What is the APPROVED VENDOR Concrete Anchor Screw used for?
This hex-head concrete anchor screw is used for fastening fixtures, brackets, and equipment to concrete, brick, or block in industrial and construction applications. Its self-tapping tip and removable design make it suitable for temporary or permanent installations where reliable holding power is needed.
What are the specifications of the APPROVED VENDOR Concrete Anchor Screw U70525.018.0125?
The screw has a 3/16 in diameter and 1 1/4 in overall length. It is case-hardened steel with a Blue Ruspert finish, self-tapping tip, and removable design. It comes in a 100-pack and uses inch measurement. The manufacturer part number is U70525.018.0125.
Where to buy APPROVED VENDOR Concrete Anchor Screws worldwide?
3G Electric supplies the APPROVED VENDOR Concrete Anchor Screw worldwide. We handle full logistics, customs clearance, and delivery to your site. As a global industrial solutions provider, we source and deliver genuine fasteners across 14 departments, including specialist expertise in combustion, pumps, and controls.
How to install a self-tapping concrete anchor screw?
Drill a pilot hole in concrete using a carbide bit of the specified diameter. Clean the hole of dust. Insert the screw and tighten with a hex driver until snug. Do not overtighten. The self-tapping tip cuts threads into the base material. For removable applications, ensure the screw is not over-torqued.
Used in
Common applications for APPROVED VENDORAPPROVED VENDOR Products
3G Electric supplies APPROVED VENDOR hex-head screw anchors. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
