Send a part number, a photo, or a whole BOM — we supply it and stand behind it. Worldwide shipping to 80+ countries.

3G Electric
RFQ CartGet a QuoteSign inSign up
APPROVED VENDOR Lantern Rings: Cut-To-Lg Roll, PTFE, 1/4 in Cross Section, 3/8 in Wd - Cut-To-Length Lantern Rings
APPROVED VENDORCut-To-Length Lantern Rings

APPROVED VENDOR Lantern Rings: Cut-To-Lg Roll, PTFE, 1/4 in Cross Section, 3/8 in Wd

The APPROVED VENDOR Lantern Rings: Cut-To-Lg Roll is a cut-to-length lantern ring made from PTFE material. It features a 1/4 in cross section, 3/8 in width, and 48 in length, part of Series 1004 with manufacturer…

SKU 3G-OTH-92617

Brand
APPROVED VENDOR
Item
Lantern Rings: Cut-To-Lg Roll, PTFE, 1/4 in Cross Section, 3/8 in Wd
Category
Cut-To-Length Lantern Rings
Available to Order
Trade pricing by quote — replies within 24h
Qty
WhatsApp an engineer
No account needed — your quote request goes straight to our engineers. A free account lets you track quotes and re-order faster.
Worldwide Shipping
Air & sea freight
Datasheet on Request
Technical specs
1-Day Quote
Replies within 24h

Technical Specifications

APPROVED VENDOR
Manufacturer Part Number
ZUSA-CP-1063
Series
1004
Type
PTFE
Material
PTFE
Lg
48 in
Wd
3/8 in
Cross Section
1/4 in
View Full Spec Sheet

Technical Documents

No technical documents available for this product.
Request documentation →
Not sure this is the right part? Get a recommendation.

Need installation or engineering help?

Installation, commissioning, maintenance plans, system design, and bundled product + service quotes — one team handles the full scope.
Talk to an engineer

Ask a question

APPROVED VENDOR Products
3G Electric (S) Pte. Ltd. — Singapore

Product Description

The APPROVED VENDOR Lantern Rings: Cut-To-Lg Roll is a cut-to-length lantern ring made from PTFE material. It features a 1/4 in cross section, 3/8 in width, and 48 in length, part of Series 1004 with manufacturer part number ZUSA-CP-1063.

Frequently Asked Questions

What is a cut-to-length PTFE lantern ring used for?

A cut-to-length PTFE lantern ring is used in pump stuffing boxes to distribute lubricant or flush fluid evenly around the shaft. It also acts as a seal between packing rings, reducing wear and leakage in rotating equipment. This APPROVED VENDOR roll allows custom sizing for various gland configurations.

What are the specifications of the APPROVED VENDOR ZUSA-CP-1063 lantern ring?

The APPROVED VENDOR ZUSA-CP-1063 lantern ring is a cut-to-length roll made of PTFE material. It has a 1/4 in cross section, 3/8 in width, and 48 in length. It is part of Series 1004 and is designed for custom-fit installation in pump sealing applications.

Where to buy APPROVED VENDOR lantern rings worldwide?

You can source APPROVED VENDOR lantern rings worldwide through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to your location. Contact us for availability and lead time on the ZUSA-CP-1063 cut-to-length PTFE roll.

How to install a cut-to-length PTFE lantern ring?

To install a cut-to-length PTFE lantern ring, measure the stuffing box depth and cut the roll to the required length using a sharp knife. Insert it between packing rings, ensuring it aligns with the lubrication port. Tighten the gland evenly to avoid distortion. Always follow pump manufacturer guidelines for best results.

Used in

Common applications for APPROVED VENDOR
Laboratory sampling — APPROVED VENDOR clear wide mouth glass bottles for collecting and storing liquid samples in non-sterile environments.
Steam heating maintenance — APPROVED VENDOR forged brass radiator valves for regulating steam flow in commercial building heating systems.
High-pressure cleaning — APPROVED VENDOR turbo spray nozzles for pressure washers used in industrial equipment cleaning up to 6,000 psi.
Cleanroom operations — APPROVED VENDOR vinyl task chairs for seating in ISO 5 classified manufacturing or assembly areas.
General sealing — APPROVED VENDOR natural rubber stoppers for closing laboratory flasks or test tubes in educational or research settings.
Tamper-evident security — APPROVED VENDOR brass lead and wire seals for securing utility meters, cargo containers, or access panels.

APPROVED VENDOR Products

3G Electric supplies APPROVED VENDOR cut-to-length lantern rings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.

You might also need

Burners & Combustion →Pumps & Compressors →Spare Parts →All Products →

Similar products

Matched by specification & description
APPROVED VENDOR
APPROVED VENDOR
APPROVED VENDOR Compression Packing Ring: PTFE, 1 1/2 in OD, 3/4 in ID, 0 pH – 14 pH, 428°F (MPN ZUSA-CP-1277). Key specifications — Base Material: PTFE; Brand: APPROVED VENDOR; Steam Temperature - Maximum: 428°F.
APPROVED VENDOR
APPROVED VENDOR
APPROVED VENDOR Compression Packing Ring: PTFE, 1 1/4 in OD, 5/8 in ID, 0 pH – 14 pH, 428°F (MPN ZUSA-CP-1276). Key specifications — Base Material: PTFE; Brand: APPROVED VENDOR; Steam Temperature - Maximum: 428°F.
APPROVED VENDOR
APPROVED VENDOR
APPROVED VENDOR Compression Packing Ring: PTFE, 2 in OD, 1 1/4 in ID, 0 pH – 14 pH, 428°F (MPN ZUSA-CP-1279). Key specifications — Base Material: PTFE; Brand: APPROVED VENDOR; Steam Temperature - Maximum: 428°F.
APPROVED VENDOR
APPROVED VENDOR
APPROVED VENDOR Compression Packing Ring: PTFE, 2 in OD, 1 in ID, 0 pH – 14 pH, 428°F (MPN ZUSA-CP-1278). Key specifications — Base Material: PTFE; Brand: APPROVED VENDOR; Steam Temperature - Maximum: 428°F.

More from APPROVED VENDOR

View all APPROVED VENDOR parts →
APPROVED VENDOR Lantern Rings: Cut-To-Lg Roll, PTFE, 3/4 in Cross Section, 7/8 in Wd, 48 in Lg (MPN ZUSA-CP-1070). Key specifications — Material: PTFE; Brand: APPROVED VENDOR; Series: 1004.
APPROVED VENDOR
APPROVED VENDOR Lantern Rings: Cut-To-Lg Roll, PTFE, 3/4 in Cross Section, 7/8 in Wd, 48 in Lg (MPN ZUSA-CP-1070). Key specifications — Material: PTFE; Brand: APPROVED VENDOR; Series: 1004.
APPROVED VENDOR Lantern Rings: Cut-To-Lg Roll, PTFE, 5/16 in Cross Section, 7/16 in Wd, 48 in Lg (MPN ZUSA-CP-1064). Key specifications — Material: PTFE; Brand: APPROVED VENDOR; Series: 1004.
APPROVED VENDOR
APPROVED VENDOR Lantern Rings: Cut-To-Lg Roll, PTFE, 5/16 in Cross Section, 7/16 in Wd, 48 in Lg (MPN ZUSA-CP-1064). Key specifications — Material: PTFE; Brand: APPROVED VENDOR; Series: 1004.
APPROVED VENDOR Lantern Rings: Cut-To-Lg Roll, PTFE, 5/8 in Cross Section, 3/4 in Wd, 48 in Lg (MPN ZUSA-CP-1069). Key specifications — Material: PTFE; Brand: APPROVED VENDOR; Series: 1004.
APPROVED VENDOR
APPROVED VENDOR Lantern Rings: Cut-To-Lg Roll, PTFE, 5/8 in Cross Section, 3/4 in Wd, 48 in Lg (MPN ZUSA-CP-1069). Key specifications — Material: PTFE; Brand: APPROVED VENDOR; Series: 1004.
APPROVED VENDOR Lantern Rings: Cut-To-Lg Roll, PTFE, 9/16 in Cross Section, 11/16 in Wd, 48 in Lg (MPN ZUSA-CP-1068). Key specifications — Material: PTFE; Brand: APPROVED VENDOR; Series: 1004.
APPROVED VENDOR
APPROVED VENDOR Lantern Rings: Cut-To-Lg Roll, PTFE, 9/16 in Cross Section, 11/16 in Wd, 48 in Lg (MPN ZUSA-CP-1068). Key specifications — Material: PTFE; Brand: APPROVED VENDOR; Series: 1004.
APPROVED VENDOR Lantern Rings: Cut-To-Lg Roll, PTFE, 3/8 in Cross Section, 1/2 in Wd, 48 in Lg (MPN ZUSA-CP-1065). Key specifications — Material: PTFE; Brand: APPROVED VENDOR; Series: 1004.
APPROVED VENDOR
APPROVED VENDOR Lantern Rings: Cut-To-Lg Roll, PTFE, 3/8 in Cross Section, 1/2 in Wd, 48 in Lg (MPN ZUSA-CP-1065). Key specifications — Material: PTFE; Brand: APPROVED VENDOR; Series: 1004.
APPROVED VENDOR Lantern Rings: Cut-To-Lg Roll, PTFE, 7/8 in Cross Section, 1 in Wd, 48 in Lg (MPN ZUSA-CP-1071). Key specifications — Material: PTFE; Brand: APPROVED VENDOR; Series: 1004.
APPROVED VENDOR
APPROVED VENDOR Lantern Rings: Cut-To-Lg Roll, PTFE, 7/8 in Cross Section, 1 in Wd, 48 in Lg (MPN ZUSA-CP-1071). Key specifications — Material: PTFE; Brand: APPROVED VENDOR; Series: 1004.
APPROVED VENDOR Lantern Rings: Cut-To-Lg Roll, PTFE, 7/16 in Cross Section, 9/16 in Wd, 48 in Lg (MPN ZUSA-CP-1066). Key specifications — Material: PTFE; Brand: APPROVED VENDOR; Series: 1004.
APPROVED VENDOR
APPROVED VENDOR Lantern Rings: Cut-To-Lg Roll, PTFE, 7/16 in Cross Section, 9/16 in Wd, 48 in Lg (MPN ZUSA-CP-1066). Key specifications — Material: PTFE; Brand: APPROVED VENDOR; Series: 1004.
APPROVED VENDOR Lantern Rings: Cut-To-Lg Roll, PTFE, 1/2 in Cross Section, 5/8 in Wd, 48 in Lg (MPN ZUSA-CP-1067). Key specifications — Material: PTFE; Brand: APPROVED VENDOR; Series: 1004.
APPROVED VENDOR
APPROVED VENDOR Lantern Rings: Cut-To-Lg Roll, PTFE, 1/2 in Cross Section, 5/8 in Wd, 48 in Lg (MPN ZUSA-CP-1067). Key specifications — Material: PTFE; Brand: APPROVED VENDOR; Series: 1004.