OEM Low-Lead Standard Sleeve Brass Compression Fitting, 5/16 in OD x 5/16 in OD
The APPROVED VENDOR Compression Fitting Union (MPN 700062-05) is a low-lead standard sleeve brass compression fitting with 5/16 in OD x 5/16 in OD fitting size. This union is designed for connecting tubing in…
SKU 3G-OTH-471038
Also listed as: 70006205 · 700062 05
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The APPROVED VENDOR Compression Fitting Union (MPN 700062-05) is a low-lead standard sleeve brass compression fitting with 5/16 in OD x 5/16 in OD fitting size. This union is designed for connecting tubing in industrial fluid systems, leveraging the OEM's specification for a reliable, leak-resistant joint.
Frequently Asked Questions
What is the APPROVED VENDOR Compression Fitting Union used for?
This brass compression fitting union connects two 5/16 in OD tubes in industrial fluid systems. It creates a leak-resistant joint for low-pressure air, water, or oil lines. APPROVED VENDOR specifies a low-lead standard sleeve design, making it suitable for applications where lead content must be minimized.
What are the specifications of the APPROVED VENDOR Compression Fitting Union?
The APPROVED VENDOR Compression Fitting Union (MPN 700062-05) has a 5/16 in OD x 5/16 in OD fitting size. It is a low-lead standard sleeve brass compression fitting. The manufacturer part number is 700062-05, and the SKU is 3G-OTH-471038. It is designed for connecting tubing in industrial fluid systems.
Where to buy the APPROVED VENDOR Compression Fitting Union worldwide?
3G Electric supplies the APPROVED VENDOR Compression Fitting Union (MPN 700062-05) to customers worldwide. As a global industrial solutions provider, we handle full logistics and customs clearance for international delivery. Contact us to order this brass compression fitting union for your fluid system needs.
How to install the APPROVED VENDOR Compression Fitting Union?
To install this brass compression fitting union, slide the nut and sleeve onto the 5/16 in OD tube, then insert the tube into the fitting body. Tighten the nut by hand, then use a wrench for an additional 1/4 to 1/2 turn. Avoid over-tightening to prevent damage. Always follow the manufacturer's instructions for leak testing.
OEM Products
3G Electric supplies OEM low-lead standard sleeve brass compression fitting. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.