OEM Low-Lead Standard Sleeve Brass Compression Fitting, 1/4 in OD x 1/2 in MNPT
The APPROVED VENDOR Compression Fitting Elbow (MPN 700069-0408) is a low-lead standard sleeve brass compression fitting with a 1/4 in OD x 1/2 in pipe fitting size, configured as Compression x MNPT. This fitting is…
SKU 3G-OTH-470974
Also listed as: 7000690408 · 700069 0408
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Delivery
- Same-day or next-business-day delivery within Singapore for in-stock items; 7–14 days for factory-order parts from Europe.
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
- Ships to
- Singapore
Need installation or engineering help?
Ask a question
Product Description
The APPROVED VENDOR Compression Fitting Elbow (MPN 700069-0408) is a low-lead standard sleeve brass compression fitting with a 1/4 in OD x 1/2 in pipe fitting size, configured as Compression x MNPT. This fitting is designed for connecting tubing to male threaded ports in industrial fluid systems.
Frequently Asked Questions
What is the APPROVED VENDOR Compression Fitting Elbow 700069-0408 used for?
This low-lead brass compression elbow connects 1/4 in OD tubing to a 1/2 in male NPT threaded port. It is used in industrial fluid systems for air, water, or hydraulic lines where a leak-tight, space-saving 90-degree turn is needed.
What are the specifications of the APPROVED VENDOR 700069-0408 compression fitting?
The fitting is a Compression x MNPT elbow with 1/4 in OD tube size and 1/2 in pipe thread. It is made of low-lead brass with a standard sleeve. The manufacturer part number is 700069-0408, branded APPROVED VENDOR.
Where to buy the APPROVED VENDOR 700069-0408 compression fitting worldwide?
3G Electric supplies the APPROVED VENDOR 700069-0408 compression fitting elbow to customers worldwide. We handle full logistics, customs clearance, and delivery to your site, ensuring you get the correct fitting for your industrial fluid system.
How to install the APPROVED VENDOR compression fitting elbow?
Slide the nut and sleeve onto the tube, insert the tube fully into the fitting body, then tighten the nut by hand followed by 1-1/4 turns with a wrench. Do not over-tighten. Use thread sealant on the male NPT end for a leak-free seal.
OEM Products
3G Electric supplies OEM low-lead standard sleeve brass compression fitting. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.