OEM Low-Lead Standard Sleeve Brass Compression Fitting Elbow, 5/8 in OD x 3/8 in OD
The APPROVED VENDOR Compression Fitting Elbow (MPN 700085-1006) is a low-lead standard sleeve brass compression fitting with 5/8 in OD x 3/8 in OD fitting sizes. This brass fitting is designed for connecting tubing…
SKU 3G-OTH-471047
Also listed as: 7000851006 · 700085 1006
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Delivery
- Same-day or next-business-day delivery within Singapore for in-stock items; 7–14 days for factory-order parts from Europe.
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
- Ships to
- Singapore
Need installation or engineering help?
Ask a question
Product Description
The APPROVED VENDOR Compression Fitting Elbow (MPN 700085-1006) is a low-lead standard sleeve brass compression fitting with 5/8 in OD x 3/8 in OD fitting sizes. This brass fitting is designed for connecting tubing in industrial fluid systems.
Frequently Asked Questions
What is the APPROVED VENDOR Compression Fitting Elbow used for?
This low-lead brass compression fitting elbow connects tubing in industrial fluid systems. It is commonly used in instrumentation, pneumatic, and hydraulic lines where a reliable, leak-resistant joint is required between 5/8 in OD and 3/8 in OD tubing.
What are the specifications of the APPROVED VENDOR 700085-1006?
The APPROVED VENDOR 700085-1006 is a low-lead standard sleeve brass compression fitting elbow. It has a 5/8 in OD x 3/8 in OD fitting size and is made of brass. The manufacturer part number is 700085-1006.
Where to buy the APPROVED VENDOR 700085-1006 worldwide?
3G Electric supplies the APPROVED VENDOR 700085-1006 compression fitting elbow to customers worldwide. We handle full logistics, customs clearance, and delivery to your site, ensuring you receive the correct brass fitting for your industrial fluid system.
How to install a brass compression fitting elbow?
To install, slide the nut and ferrule onto the tubing, insert the tube fully into the fitting body, then tighten the nut by hand. Use a wrench to tighten an additional 1 to 1.25 turns for a proper seal. Avoid overtightening to prevent damage to the brass sleeve.
OEM Products
3G Electric supplies OEM low-lead standard sleeve brass compression fitting. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.