Send a part number, a photo, or a whole BOM — we supply it and stand behind it. Worldwide shipping to 80+ countries.

3G Electric
RFQ CartGet a QuoteSign inSign up
APPROVED VENDOR Ball End Mill: Carbide, AlCrN Coated, 4 Flute, 3/16" Mill Dia, 5/16" LOC - Fast-Cutting Carbide Ball End Mills for Stainless Steel & Super Alloys
APPROVED VENDORFast-Cutting Carbide Ball End Mills for Stainless Steel & Super Alloys

APPROVED VENDOR Ball End Mill: Carbide, AlCrN Coated, 4 Flute, 3/16" Mill Dia, 5/16" LOC

The APPROVED VENDOR Ball End Mill (MPN 311174) is a fast-cutting carbide ball end mill for stainless steel and super alloys, featuring an AlCrN coating and 4 flutes. It has a 3/16" mill diameter, 5/16" length of cut…

SKU 3G-OTH-221523

Brand
APPROVED VENDOR
Item
Ball End Mill: Carbide, AlCrN Coated, 4 Flute, 3/16" Mill Dia, 5/16" LOC
Category
Fast-Cutting Carbide Ball End Mills for Stainless Steel & Super Alloys
Available to Order
Trade pricing by quote — replies within 24h
Qty
WhatsApp an engineer
No account needed — your quote request goes straight to our engineers. A free account lets you track quotes and re-order faster.
Worldwide Shipping
Air & sea freight
Datasheet on Request
Technical specs
1-Day Quote
Replies within 24h

Technical Specifications

APPROVED VENDOR
Manufacturer Part Number
311174
Type
AlCrN Coated
Mill Dia
3/16"
OAL
2"
Flute
4
LOC
5/16"
View Full Spec Sheet

Technical Documents

No technical documents available for this product.
Request documentation →
Not sure this is the right part? Get a recommendation.

Need installation or engineering help?

Installation, commissioning, maintenance plans, system design, and bundled product + service quotes — one team handles the full scope.
Talk to an engineer

Ask a question

APPROVED VENDOR Products
3G Electric (S) Pte. Ltd. — Singapore

Product Description

The APPROVED VENDOR Ball End Mill (MPN 311174) is a fast-cutting carbide ball end mill for stainless steel and super alloys, featuring an AlCrN coating and 4 flutes. It has a 3/16" mill diameter, 5/16" length of cut, and 2" overall length. 3G Electric interprets your demand for this cutting tool, sources it across 14 industrial departments, and supports your operation with specialist depth in machining and controls.

Frequently Asked Questions

What is a carbide ball end mill used for?

A carbide ball end mill creates contoured surfaces, slots, and dies in stainless steel and super alloys. The ball nose allows 3D profiling and radius cutting. This AlCrN-coated, 4-flute design from APPROVED VENDOR handles high-temperature alloys where standard end mills wear quickly.

What are the specifications of the APPROVED VENDOR 311174 ball end mill?

This ball end mill has a 3/16" mill diameter, 5/16" length of cut (LOC), and 2" overall length (OAL). It is solid carbide with an AlCrN coating, 4 flutes, and is designed for fast cutting in stainless steel and super alloys. The manufacturer part number is 311174.

Where to buy the APPROVED VENDOR 311174 ball end mill worldwide?

3G Electric supplies the APPROVED VENDOR 311174 ball end mill to customers worldwide. We handle full logistics, customs clearance, and delivery to your facility. Contact us for a quote and lead time on this fast-cutting carbide end mill for stainless steel and super alloys.

How to select the right ball end mill for stainless steel?

For stainless steel and super alloys, choose a carbide ball end mill with a wear-resistant coating like AlCrN. The 4-flute design provides a good balance of chip evacuation and surface finish. Match the mill diameter and length of cut to your specific cavity or contour depth requirements.

Used in

Common applications for APPROVED VENDOR
Laboratory sampling — APPROVED VENDOR clear wide mouth glass bottles for collecting and storing liquid samples in non-sterile environments.
Steam heating maintenance — APPROVED VENDOR forged brass radiator valves for regulating steam flow in commercial building heating systems.
High-pressure cleaning — APPROVED VENDOR turbo spray nozzles for pressure washers used in industrial equipment cleaning up to 6,000 psi.
Cleanroom operations — APPROVED VENDOR vinyl task chairs for seating in ISO 5 classified manufacturing or assembly areas.
General sealing — APPROVED VENDOR natural rubber stoppers for closing laboratory flasks or test tubes in educational or research settings.
Tamper-evident security — APPROVED VENDOR brass lead and wire seals for securing utility meters, cargo containers, or access panels.

APPROVED VENDOR Products

3G Electric supplies APPROVED VENDOR fast-cutting carbide ball end mills for stainless steel & super alloys. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.

You might also need

Burners & Combustion →Pumps & Compressors →Spare Parts →All Products →

Similar products

Matched by specification & description
APPROVED VENDOR Ball End Mill: Carbide, AlCrN Coated, 4 Flute, 3/16" Mill Dia, 5/8" LOC, 2" OAL (MPN 311176)
APPROVED VENDOR
APPROVED VENDOR Ball End Mill: Carbide, AlCrN Coated, 4 Flute, 3/16" Mill Dia, 5/8" LOC, 2" OAL (MPN 311176)
APPROVED VENDOR Ball End Mill: Carbide, AlCrN Coated, 4 Flute, 1/8" Mill Dia, 1/2" LOC, 2" OAL (MPN 311171)
APPROVED VENDOR
APPROVED VENDOR Ball End Mill: Carbide, AlCrN Coated, 4 Flute, 1/8" Mill Dia, 1/2" LOC, 2" OAL (MPN 311171)
APPROVED VENDOR Ball End Mill: Carbide, AlCrN Coated, 4 Flute, 1/8" Mill Dia, 1/4" LOC, 2" OAL (MPN 311169)
APPROVED VENDOR
APPROVED VENDOR Ball End Mill: Carbide, AlCrN Coated, 4 Flute, 1/8" Mill Dia, 1/4" LOC, 2" OAL (MPN 311169)
APPROVED VENDOR Ball End Mill: Carbide, AlCrN Coated, 4 Flute, 1/4" Mill Dia, 3/4" LOC, 2-1/2" OAL (MPN 311186)
APPROVED VENDOR
APPROVED VENDOR Ball End Mill: Carbide, AlCrN Coated, 4 Flute, 1/4" Mill Dia, 3/4" LOC, 2-1/2" OAL (MPN 311186)
APPROVED VENDOR Ball End Mill: Carbide, AlCrN Coated, 4 Flute, 5/16" Mill Dia, 7/16" LOC, 2" OAL (MPN 311190)
APPROVED VENDOR
APPROVED VENDOR Ball End Mill: Carbide, AlCrN Coated, 4 Flute, 5/16" Mill Dia, 7/16" LOC, 2" OAL (MPN 311190)
APPROVED VENDOR Ball End Mill: Carbide, AlCrN Coated, 4 Flute, 1/4" Mill Dia, 1/2" LOC, 2-1/2" OAL (MPN 311183)
APPROVED VENDOR
APPROVED VENDOR Ball End Mill: Carbide, AlCrN Coated, 4 Flute, 1/4" Mill Dia, 1/2" LOC, 2-1/2" OAL (MPN 311183)

More from APPROVED VENDOR

View all APPROVED VENDOR parts →
APPROVED VENDOR Ball End Mill: Carbide, AlCrN Coated, 4 Flute, 1" Mill Dia, 2" LOC, 4" OAL (MPN 311226)
APPROVED VENDOR
APPROVED VENDOR Ball End Mill: Carbide, AlCrN Coated, 4 Flute, 1" Mill Dia, 2" LOC, 4" OAL (MPN 311226)
APPROVED VENDOR Ball End Mill: Carbide, AlCrN Coated, 4 Flute, 1/2" Mill Dia, 1" LOC, 3" OAL (MPN 311208)
APPROVED VENDOR
APPROVED VENDOR Ball End Mill: Carbide, AlCrN Coated, 4 Flute, 1/2" Mill Dia, 1" LOC, 3" OAL (MPN 311208)
APPROVED VENDOR Ball End Mill: Carbide, AlCrN Coated, 4 Flute, 1/2" Mill Dia, 5/8" LOC, 2-1/2" OAL (MPN 311204)
APPROVED VENDOR
APPROVED VENDOR Ball End Mill: Carbide, AlCrN Coated, 4 Flute, 1/2" Mill Dia, 5/8" LOC, 2-1/2" OAL (MPN 311204)
APPROVED VENDOR Ball End Mill: Carbide, AlCrN Coated, 4 Flute, 3/8" Mill Dia, 1/2" LOC, 2" OAL (MPN 311197)
APPROVED VENDOR
APPROVED VENDOR Ball End Mill: Carbide, AlCrN Coated, 4 Flute, 3/8" Mill Dia, 1/2" LOC, 2" OAL (MPN 311197)
APPROVED VENDOR Ball End Mill: Carbide, AlCrN Coated, 4 Flute, 3/4" Mill Dia, 1-5/8" LOC, 4" OAL (MPN 311222)
APPROVED VENDOR
APPROVED VENDOR Ball End Mill: Carbide, AlCrN Coated, 4 Flute, 3/4" Mill Dia, 1-5/8" LOC, 4" OAL (MPN 311222)
APPROVED VENDOR Ball End Mill: Carbide, GMX-35 Coated, 4 Flute, 1/2" Mill Dia, 1-1/4" LOC, 3" OAL (MPN GM12B4)
APPROVED VENDOR
APPROVED VENDOR Ball End Mill: Carbide, GMX-35 Coated, 4 Flute, 1/2" Mill Dia, 1-1/4" LOC, 3" OAL (MPN GM12B4)
APPROVED VENDOR Ball End Mill: Carbide, AlCrN Coated, 4 Flute, 1/4" Mill Dia, 3/8" LOC, 2" OAL (MPN 311179)
APPROVED VENDOR
APPROVED VENDOR Ball End Mill: Carbide, AlCrN Coated, 4 Flute, 1/4" Mill Dia, 3/8" LOC, 2" OAL (MPN 311179)
APPROVED VENDOR Ball End Mill: Carbide, GMX-35 Coated, 4 Flute, 1/8" Mill Dia, 1/2" LOC, 1-1/2" OAL (MPN GM18B4)
APPROVED VENDOR
APPROVED VENDOR Ball End Mill: Carbide, GMX-35 Coated, 4 Flute, 1/8" Mill Dia, 1/2" LOC, 1-1/2" OAL (MPN GM18B4)