OEM Malleable Iron Pipe Cap, 1 in BSPT Threaded, 150 psi @ 72°F
The APPROVED VENDOR Cap is a low-pressure threaded pipe fitting, a 1-inch BSPT threaded cap made of malleable iron with a maximum operating pressure of 150 psi @ 72° F. 3G Electric interprets demand for this fitting…
SKU 3G-OTH-472895
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Delivery
- Same-day or next-business-day delivery within Singapore for in-stock items; 7–14 days for factory-order parts from Europe.
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
- Ships to
- Singapore
Need installation or engineering help?
Ask a question
Product Description
The APPROVED VENDOR Cap is a low-pressure threaded pipe fitting, a 1-inch BSPT threaded cap made of malleable iron with a maximum operating pressure of 150 psi @ 72° F. 3G Electric interprets demand for this fitting across 14 industrial departments, with specialist depth in combustion, pumps and controls as an authorised distributor.
Frequently Asked Questions
What is the APPROVED VENDOR Cap used for?
The APPROVED VENDOR Cap is a low-pressure threaded pipe fitting used to seal the end of a 1-inch BSPT pipe in industrial plumbing, pneumatic, and hydraulic systems. It is commonly applied in water, air, and steam lines where a maximum operating pressure of 150 psi @ 72° F is sufficient.
What are the specifications of the APPROVED VENDOR Cap ?
The APPROVED VENDOR Cap (MPN ) is a 1-inch BSPT threaded cap made of malleable iron. Its maximum operating pressure is 150 psi @ 72° F. This fitting is designed for low-pressure threaded pipe applications and is supplied by 3G Electric across 14 industrial departments.
Where to buy the APPROVED VENDOR Cap worldwide?
3G Electric supplies the APPROVED VENDOR Cap to customers worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your site. Contact us to order this 1-inch BSPT malleable iron cap for your low-pressure piping needs.
How to install the APPROVED VENDOR Cap ?
To install the APPROVED VENDOR Cap , clean the male BSPT threads on the pipe, apply a compatible thread sealant or PTFE tape, and hand-tighten the cap. Use a wrench for final snugging, but avoid over-tightening to prevent cracking the malleable iron. Ensure the system pressure does not exceed 150 psi @ 72° F.
OEM Products
3G Electric supplies OEM low-pressure threaded pipe fittings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.