OEM Split Taper Bushing: H
The APPROVED VENDOR Split Taper Bushing: H is a split taper bushing with a 1 1/4 in bore diameter and a 2.25 in bolt circle diameter, featuring a taper of 3/4 in per ft. This inch-sized component, identified by…
SKU 3G-OTH-113864
Also listed as: HX114 · HX1 1 4 · HX1-1-4
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Delivery
- Same-day or next-business-day delivery within Singapore for in-stock items; 7–14 days for factory-order parts from Europe.
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
- Ships to
- Singapore
Need installation or engineering help?
Ask a question
Product Description
The APPROVED VENDOR Split Taper Bushing: H is a split taper bushing with a 1 1/4 in bore diameter and a 2.25 in bolt circle diameter, featuring a taper of 3/4 in per ft. This inch-sized component, identified by manufacturer part number HX1-1/4, is designed for mounting and securing components on shafts.
Frequently Asked Questions
What is an APPROVED VENDOR Split Taper Bushing used for?
An APPROVED VENDOR Split Taper Bushing is used to mount and secure components such as pulleys, sprockets, or couplings onto shafts. It provides a tight, concentric fit and easy installation or removal, commonly applied in power transmission systems across industrial machinery and conveyor equipment.
What are the specifications of the APPROVED VENDOR Split Taper Bushing HX1-1/4?
The APPROVED VENDOR Split Taper Bushing HX1-1/4 has a 1 1/4 in bore diameter, a 2.25 in bolt circle diameter, and a taper of 3/4 in per ft. It is an inch-sized component, type H, with manufacturer part number HX1-1/4, designed for secure shaft mounting.
Where to buy APPROVED VENDOR Split Taper Bushings worldwide?
You can source APPROVED VENDOR Split Taper Bushings worldwide through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to your location, ensuring you receive the correct inch-sized bushing for your power transmission needs.
How to install an APPROVED VENDOR Split Taper Bushing?
To install an APPROVED VENDOR Split Taper Bushing, clean the shaft and bushing bore, then slide the bushing onto the shaft. Align the bolt holes and tighten the screws evenly to draw the bushing onto the taper. Always follow manufacturer torque recommendations and use a key if required for positive drive.
OEM Products
3G Electric supplies OEM split taper bushings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.