OEM APPROVED VENDOR Standard Heat Shrink Tubing
The APPROVED VENDOR Standard Heat Shrink Tubing (SKU ST250GR-48-1pk, MPN ST250GR-48-1pk) is a green, 0.25 in I.D. before shrinking and 0.13 in I.D. after shrinking tubing with a 2:1 shrink ratio.
SKU 3G-OTH-54216
Also listed as: ST250GR481pk · ST250GR 48 1pk
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Delivery
- Same-day or next-business-day delivery within Singapore for in-stock items; 7–14 days for factory-order parts from Europe.
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
- Ships to
- Singapore
Need installation or engineering help?
Ask a question
Product Description
The APPROVED VENDOR Standard Heat Shrink Tubing (SKU ST250GR-48-1pk, MPN ST250GR-48-1pk) is a green, 0.25 in I.D. before shrinking and 0.13 in I.D. after shrinking tubing with a 2:1 shrink ratio.
Frequently Asked Questions
What is APPROVED VENDOR Heat Shrink Tubing used for?
APPROVED VENDOR Heat Shrink Tubing is used for insulating and protecting electrical connections, wires, and cables in industrial equipment. It provides abrasion resistance and strain relief in control panels, motors, and junction boxes. The 2:1 shrink ratio ensures a tight fit over terminals and splices.
What are the specifications of APPROVED VENDOR Heat Shrink Tubing?
The APPROVED VENDOR Heat Shrink Tubing (MPN ST250GR-48-1pk) has a 0.25 in inner diameter before shrinking and 0.13 in after shrinking, with a 2:1 shrink ratio. It is green, 48 inches long, and made by APPROVED VENDOR. It is a standard polyolefin tubing for general-purpose electrical insulation.
Where to buy APPROVED VENDOR Heat Shrink Tubing in worldwide?
You can source APPROVED VENDOR Heat Shrink Tubing through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to worldwide locations. Contact us for availability and lead time on this SKU ST250GR-48-1pk.
How to install APPROVED VENDOR Heat Shrink Tubing?
To install, slide the tubing over the connection before shrinking. Apply heat evenly using a heat gun or oven at approximately 121 °C (250 °F) until the tubing conforms tightly. Allow it to cool before handling. Ensure the tubing is fully shrunk for a secure, moisture-resistant seal.
OEM Products
3G Electric supplies OEM standard heat shrink tubing. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
