OEM Compression Packing Ring: Graphite/PTFE
The APPROVED VENDOR Compression Packing Ring (SKU ZUSA-CP-1271, MPN ZUSA-CP-1271) is a packing ring made from Graphite/PTFE. It has an outer diameter of 1 1/2 in, an inner diameter of 3/4 in, and a maximum steam…
SKU 3G-OTH-94310
Also listed as: ZUSACP1271 · ZUSA CP 1271
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Delivery
- Same-day or next-business-day delivery within Singapore for in-stock items; 7–14 days for factory-order parts from Europe.
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
- Ships to
- Singapore
Need installation or engineering help?
Ask a question
Product Description
The APPROVED VENDOR Compression Packing Ring (SKU ZUSA-CP-1271, MPN ZUSA-CP-1271) is a packing ring made from Graphite/PTFE. It has an outer diameter of 1 1/2 in, an inner diameter of 3/4 in, and a maximum steam temperature of 507°F. This product operates within a pH range of 0 to 14.
Frequently Asked Questions
What is the APPROVED VENDOR Compression Packing Ring used for?
The APPROVED VENDOR Compression Packing Ring is used to seal rotating or reciprocating shafts in pumps, valves, and mixers. Its Graphite/PTFE material handles aggressive chemicals and steam up to 507°F, making it suitable for chemical processing, water treatment, and power generation applications.
What are the specifications of the APPROVED VENDOR Compression Packing Ring ZUSA-CP-1271?
The ZUSA-CP-1271 has an outer diameter of 1 1/2 in, an inner diameter of 3/4 in, and a maximum steam temperature of 507°F. It is made from Graphite/PTFE and operates within a pH range of 0 to 14. This packing ring is manufactured by APPROVED VENDOR.
Where to buy the APPROVED VENDOR Compression Packing Ring worldwide?
You can source the APPROVED VENDOR Compression Packing Ring through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to worldwide destinations. Contact us for availability and lead time on this packing ring.
How to install the APPROVED VENDOR Compression Packing Ring?
To install, cut the ring to length if needed, then wrap it around the shaft and insert into the stuffing box. Tighten the gland evenly to avoid binding. For best results, follow the manufacturer's torque recommendations and allow the ring to seat gradually during initial operation.
OEM Products
3G Electric supplies OEM packing rings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.