ASHLAND CONVEYOR Threaded-Stud Mount Ball Transfer
The ASHLAND CONVEYOR Ball Transfer is a threaded-stud mount unit with a 1 in ball diameter, featuring a Nylon ball and a 100 lb ball load capacity. It has a 1 1/4 in projection and is identified by manufacturer part…
SKU 3G-OTH-635956
Also listed as: BTS516181DIA100NYLCS · BT S 5 16 18 1DIA 100 NYL CS · BT-S-5-16-18-1DIA-100-NYL-CS
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Delivery
- Same-day or next-business-day delivery within Singapore for in-stock items; 7–14 days for factory-order parts from Europe.
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
- Ships to
- Singapore
Need installation or engineering help?
Ask a question
Product Description
The ASHLAND CONVEYOR Ball Transfer is a threaded-stud mount unit with a 1 in ball diameter, featuring a Nylon ball and a 100 lb ball load capacity. It has a 1 1/4 in projection and is identified by manufacturer part number BT S 5/16-18 1DIA 100 NYL/CS.
Frequently Asked Questions
What is the ASHLAND CONVEYOR ball transfer used for?
This threaded-stud mount ball transfer is used in material handling systems to allow omnidirectional movement of loads. It is ideal for conveyor transfer points, workstations, and packaging lines where low-friction, multidirectional motion is needed.
What are the specifications of the ASHLAND CONVEYOR ball transfer?
The ball transfer has a 1 in ball diameter, a Nylon ball, a 100 lb ball load capacity, and a 1 1/4 in projection. It uses a 5/16-18 threaded-stud mount and is identified by manufacturer part number BT S 5/16-18 1DIA 100 NYL/CS.
Where to buy ASHLAND CONVEYOR ball transfers worldwide?
3G Electric supplies ASHLAND CONVEYOR ball transfers worldwide. We handle full logistics and customs clearance to deliver this threaded-stud mount unit with a 1 in Nylon ball and 100 lb capacity to your facility, wherever you are located.
How to install a threaded-stud mount ball transfer?
Install the ball transfer by threading the 5/16-18 stud into a pre-tapped hole or using a locknut on the underside of the mounting surface. Ensure the surface is flat and rigid, and tighten to the manufacturer's recommended torque to avoid damaging the Nylon ball housing.
Used in
Common applications for ASHLAND CONVEYORASHLAND CONVEYOR Products
3G Electric supplies ASHLAND CONVEYOR threaded-stud mount ball transfers. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.