B-LINE BY EATON Beam Clamp, 3/8"-16 Thread, 160 lb Capacity
The B-LINE BY EATON Rod Hanger (SKU 3G-OTH-04614) is a steel beam, wire rod and purlin clamp with a zinc-plated finish. It features a 3/8"-16 thread size, a 160 lb load capacity, and a hammer-on mounting type for use…
SKU 3G-OTH-04614
Also listed as: BH6E24 · BH6 E 2 4
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
Compliance & shipping
- Hazardous material
- Not classified as hazardous
- California Prop 65 warning
- No warning recorded
- Licence required
- No licence required
- Safety Data Sheet
- Not available
- Special shipping
- Ships under standard freight
Need installation or engineering help?
Ask a question
Product Description
The B-LINE BY EATON Rod Hanger (SKU 3G-OTH-04614) is a steel beam, wire rod and purlin clamp with a zinc-plated finish. It features a 3/8"-16 thread size, a 160 lb load capacity, and a hammer-on mounting type for use with 4 in square boxes. The hanger accommodates beam flanges from 1/8 in to 1/4 in thick and is UL/CUL listed.
Frequently Asked Questions
What is the B-LINE BY EATON rod hanger used for?
The B-LINE BY EATON rod hanger is used to suspend threaded rods from steel beams in electrical and mechanical installations. It is designed for supporting conduit, cable trays, or piping systems in commercial and industrial buildings, using a hammer-on mounting method for quick attachment to beam flanges.
What are the specifications of the B-LINE BY EATON rod hanger?
This rod hanger has a 3/8"-16 thread size, a 160 lb load capacity, and a 1 in overall length. It accommodates beam flanges from 1/8 in to 1/4 in thick, is made of steel with a zinc-plated finish, and is UL/CUL listed. It is designed for use with 4 in square boxes.
Where to buy the B-LINE BY EATON rod hanger worldwide?
You can source the B-LINE BY EATON rod hanger through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to worldwide destinations. Contact us for availability and lead time on this item.
How to install the B-LINE BY EATON rod hanger?
Installation uses a hammer-on mounting type: position the hanger over the beam flange and strike the top to secure it. Ensure the flange thickness is within 1/8 in to 1/4 in. Thread the rod into the 3/8"-16 threaded hole and tighten. Always follow local codes and manufacturer guidelines for safe loading.
Used in
Common applications for B-LINE BY EATONB-LINE BY EATON Products
3G Electric supplies B-LINE BY EATON beam, wire rod & purlin clamps. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
