BANJO Pump Repair Kit, 12000A, 3 in Poly Impeller
The BANJO Pump Repair Kit, manufacturer part number 12000A, is a seal kit for dewatering and wastewater pumps. This kit includes a 3-inch poly pump impeller as a key component for pump maintenance.
SKU 3G-OTH-85408
Also listed as: 12000 A · 12000-A
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The BANJO Pump Repair Kit, manufacturer part number 12000A, is a seal kit for dewatering and wastewater pumps. This kit includes a 3-inch poly pump impeller as a key component for pump maintenance.
Frequently Asked Questions
What is the BANJO Pump Repair Kit 12000A used for?
The BANJO Pump Repair Kit 12000A is used for maintaining dewatering and wastewater pumps. It includes a 3-inch poly pump impeller to restore pump performance in industrial fluid-handling applications.
What are the specifications of the BANJO Pump Repair Kit 12000A?
The BANJO Pump Repair Kit, part number 12000A, includes a 3-inch poly pump impeller. It is classified as a pump repair kit and is designed for dewatering and wastewater pump maintenance.
Where to buy the BANJO Pump Repair Kit 12000A worldwide?
3G Electric supplies the BANJO Pump Repair Kit 12000A worldwide. We handle full logistics and customs clearance to deliver this pump repair kit to your facility, wherever it is located.
How to install the BANJO Pump Repair Kit 12000A?
To install the BANJO Pump Repair Kit 12000A, first disconnect pump power and drain fluid. Replace the worn impeller with the included 3-inch poly impeller, following the pump manufacturer's torque and alignment specifications.
Used in
Common applications for BANJOBANJO Products
3G Electric supplies BANJO seal kits for dewatering & wastewater pumps. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
You might also need
Compatible alternatives & equivalents
- BANJO Engine-driven water pump with a 6 1/2 hp gas engine, 2 in FNPT inlet and outlet, and a polypropylene volute. Delivers 190 gpm flow rate at 20 ft of head. Recoil-start ignition. Suitable for dewatering, irrigation, and fluid transfer in agricultural and industrial applications
- BANJO Replacement mechanical seal assembly for BANJO 444Pih24 pumps. Provides a leak-tight seal between the rotating shaft and stationary pump housing to prevent fluid leakage. Suitable for agricultural, industrial, and irrigation fluid handling applications