BANJO HB038-90 Polypropylene Rigid Barbed Hose Fitting
The BANJO HB038-90 is a polypropylene multipurpose rigid barbed hose fitting for 3/8 in hose I.D., with a 3/8 in x 3/8 in fitting size and a Hose Barb x NPT, Male x Male, Hex configuration. Designed for air, water…
SKU 3G-OTH-597882
Also listed as: HB03890 · HB038 90
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The BANJO HB038-90 is a polypropylene multipurpose rigid barbed hose fitting for 3/8 in hose I.D., with a 3/8 in x 3/8 in fitting size and a Hose Barb x NPT, Male x Male, Hex configuration. Designed for air, water, and chemical applications, this fitting is supplied by 3G Electric, which interprets customer demand and delivers genuine industrial equipment across 14 departments — with specialist depth in combustion, pumps, and controls as an authorised distributor.
Frequently Asked Questions
What is the BANJO HB038-90 barbed hose fitting used for?
The BANJO HB038-90 is a polypropylene rigid barbed hose fitting designed for air, water, and chemical transfer applications. Its 3/8 in hose I.D. and NPT thread make it suitable for low-pressure fluid handling in industrial, agricultural, or chemical processing systems.
What are the specifications of the BANJO HB038-90?
The BANJO HB038-90 has a 3/8 in x 3/8 in fitting size, with a Hose Barb x NPT, Male x Male, Hex configuration. It is made of polypropylene for multipurpose use with air, water, and chemicals. The manufacturer part number is HB038-90.
Where to buy the BANJO HB038-90 worldwide?
3G Electric supplies the BANJO HB038-90 worldwide, handling full logistics, customs clearance, and delivery to your site. As a global industrial solutions provider, we source genuine BANJO fittings and support procurement across 14 departments, including pumps and controls.
How to install a BANJO barbed hose fitting?
To install the BANJO HB038-90, push the barbed end into a 3/8 in I.D. hose until snug, then secure with a hose clamp if needed. Apply thread sealant to the NPT male threads before tightening into a female port. Avoid over-tightening to prevent cracking the polypropylene.
Used in
Common applications for BANJOBANJO Products
3G Electric supplies BANJO polypropylene multipurpose (air, water, chemical) rigid barbed hose fittings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
