Send a part number, a photo, or a whole BOM — we supply it and stand behind it. EXW Singapore — collect from our office.

3G Electric
Describe the job or paste specifications. Press Enter or Search.
RFQ CartGet a QuoteSign inSign up
BANSBACH EASYLIFT Gas Spring - Gas Springs

BANSBACH EASYLIFT Gas Spring

The BANSBACH EASYLIFT Gas Spring (SKU AN041-054, MPN AN041-054) is a 15 lbf force unit with an M8 rod thread size and 15 5/8 in extended length, supplied without end fittings. 3G Electric sources this gas spring…

SKU 3G-OTH-519204

Also listed as: AN041054 · AN041 054

Brand
BANSBACH EASYLIFT
Item
Gas Spring
Part Number
AN041-054
Category
Gas Springs
Available to Order
Trade pricing by quote — replies within 24h
Qty
WhatsApp an engineerMessage via Telegram
No account needed — your quote request goes straight to our engineers. A free account lets you track quotes and re-order faster.
EXW Singapore
Collect or forward from our office
Datasheet on Request
Technical specs
1-Day Quote
Replies within 24h

Local availability & support — Singapore

Local office
20 Woodlands Link #09-05, Singapore 738733
Phone
+65 8878 8355
Payment
Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.

Compliance & shipping

Hazardous material
Yes — hazmat handling and paperwork applyHazardous Material
California Prop 65 warning
No warning recorded
Licence required
No licence required
Safety Data Sheet
Not available
Special shipping
Ships under standard freight

Technical Specifications

BANSBACH EASYLIFT
Manufacturer Part Number
AN041-054
Type
15 lbf Force, End Fittings Not Included
Force
15 lbf
Ext Lg
15 5/8 in
UNSPSC
31161904
Standards
EC 1907/2006; GHS; OSHA 29 CFR 1910
Thread Size
M8
Catalog Page
1938
Rod Diameter
0.32 in Rod Diameter
Rod Material
Stainless Steel
Catalog Group
D9219
Stroke Length
6-19/64 in
Extended Length
15-5/8 in Extended Length This refers to the entire length of a gas spring when its piston rod is completely extended.
Rod Thread Size
M8
Compressed Length
9-21/64 in Compressed Length This refers to the length of a gas spring when it is fully compressed. The compressed length of a spring is always shorter than its full, extended length.
Country of Origin
USA (subject to change)
Cylinder Diameter
0.75 in Cylinder Diameter
Cylinder Material
Stainless Steel
End Fittings Type
End Fittings Not Included
Maximum Rated Capacity
15 lb
Operating Temperature - Maximum
176 °F
Operating Temperature - Minimum
-22 °F
Not sure this is the right part? Get a recommendation.

Need installation or engineering help?

Installation, commissioning, maintenance plans, system design, and bundled product + service quotes — one team handles the full scope.
Talk to an engineer

Ask a question

BANSBACH EASYLIFT Products
3G Electric (S) Pte. Ltd. — Singapore

Product Description

The BANSBACH EASYLIFT Gas Spring (SKU AN041-054, MPN AN041-054) is a 15 lbf force unit with an M8 rod thread size and 15 5/8 in extended length, supplied without end fittings. 3G Electric sources this gas spring across 14 industrial departments, with specialist depth in motion-control components, ensuring the right part for your application.

Frequently Asked Questions

What is the BANSBACH EASYLIFT gas spring used for?

The BANSBACH EASYLIFT gas spring provides controlled lifting and counterbalancing in industrial equipment, such as machine guards, hatches, and access panels. Its 15 lbf force and 15 5/8 in extended length suit light-duty motion-control applications across manufacturing, material handling, and automation systems.

What are the specifications of the BANSBACH EASYLIFT gas spring AN041-054?

This gas spring has a 15 lbf force rating, 15 5/8 in extended length, and M8 rod thread size. It is supplied without end fittings. The manufacturer part number is AN041-054, and the brand is BANSBACH EASYLIFT. 3G Electric sources this component across 14 industrial departments.

Where to buy BANSBACH EASYLIFT gas springs worldwide?

3G Electric supplies BANSBACH EASYLIFT gas springs worldwide, handling full logistics and customs clearance for global delivery. As a sourcing specialist across 14 industrial departments, we provide the correct part for your application, including the AN041-054 with M8 thread and 15 lbf force.

How to select the correct BANSBACH EASYLIFT gas spring for an application?

Select based on required force (lbf), extended length, and rod thread size. For the AN041-054, verify the 15 lbf force matches your load, the 15 5/8 in extended length fits the mounting space, and the M8 thread mates with your end fittings. 3G Electric can help confirm compatibility for your motion-control system.

Used in

Common applications for BANSBACH EASYLIFT
Industrial machinery — BANSBACH EASYLIFT gas spring (e.g., SKU 6GTE3, 15 lbf) for counterbalancing machine guards and access panels.
Material handling — BANSBACH EASYLIFT gas spring (e.g., SKU 6GTP4, 50 lbf) for controlled lifting of lids and hatches on equipment.
Access panels — BANSBACH EASYLIFT gas spring (e.g., SKU 6FRF3, 80 lbf) with elbow end fittings for lifting and holding panels.
Remote actuation — BANSBACH EASYLIFT Bowden wire release (e.g., SKU 6FRZ2, aluminum button) for releasing latches via flexible cable.
Emergency stops — BANSBACH EASYLIFT Bowden wire release (e.g., SKU 6FRY8, aluminum button) for remote actuation of safety mechanisms.
Valve controls — BANSBACH EASYLIFT Bowden wire release (e.g., SKU 6FRY5, plastic button) for manual cable pull-to-release operation.
Not sure this is the right part? Photo-identify it→

BANSBACH EASYLIFT Products

3G Electric supplies BANSBACH EASYLIFT gas springs. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.

You might also need

Burners & Combustion →Pumps & Compressors →Spare Parts →All Products →

More from BANSBACH EASYLIFT

View all BANSBACH EASYLIFT parts →
Gas spring providing controlled lifting and positioning force for industrial lids, hatches, and panels. 60 lbf force, 5 13/16 in extended length, M8 rod thread. End fittings not included
BANSBACH EASYLIFT
Gas spring providing controlled lifting and positioning force for industrial lids, hatches, and panels. 60 lbf force, 5 13/16 in extended length, M8 rod thread. End fittings not included
Gas spring with 70 lbf force, 22 23/64 in extended length, and M8 rod thread. End fittings not included, allowing custom mounting solutions. Used for controlled lifting and counterbalancing of hatches, lids, and access panels in industrial equipment
BANSBACH EASYLIFT
Gas spring with 70 lbf force, 22 23/64 in extended length, and M8 rod thread. End fittings not included, allowing custom mounting solutions. Used for controlled lifting and counterbalancing of hatches, lids, and access panels in industrial equipment
Gas spring providing 150 lbf of force for counterbalancing or assisting lifting of hatches, lids, and panels. Extended length of 18 15/64 inches with M8 rod thread. Supplied without end fittings. Suitable for machinery guarding, access doors, and material handling systems
BANSBACH EASYLIFT
Gas spring providing 150 lbf of force for counterbalancing or assisting lifting of hatches, lids, and panels. Extended length of 18 15/64 inches with M8 rod thread. Supplied without end fittings. Suitable for machinery guarding, access doors, and material handling systems
Gas spring with 100 lbf force, M8 rod thread, and 18 15/64 in extended length. Supplied without end fittings. Used for counterbalancing, lifting, or damping motion in industrial enclosures, machine guards, and access panels
BANSBACH EASYLIFT
Gas spring with 100 lbf force, M8 rod thread, and 18 15/64 in extended length. Supplied without end fittings. Used for counterbalancing, lifting, or damping motion in industrial enclosures, machine guards, and access panels
Gas spring with 250 lbf force and 19 19/64 in extended length. Features MF10 rod thread and includes elbow end fittings. Used for controlled lifting and counterbalancing of industrial hatches, machine guards, and access panels
BANSBACH EASYLIFT
Gas spring with 250 lbf force and 19 19/64 in extended length. Features MF10 rod thread and includes elbow end fittings. Used for controlled lifting and counterbalancing of industrial hatches, machine guards, and access panels
Gas spring with 80 lbf force and M5 rod thread, extended length 9 1/16 in. Supplied without end fittings for custom mounting. Used for controlled lifting, counterbalancing, or positioning of lids, hatches, and panels in industrial equipment and machinery
BANSBACH EASYLIFT
Gas spring with 80 lbf force and M5 rod thread, extended length 9 1/16 in. Supplied without end fittings for custom mounting. Used for controlled lifting, counterbalancing, or positioning of lids, hatches, and panels in industrial equipment and machinery
Gas spring with 80 lbf force and 14 13/64 in extended length. Includes elbow end fittings. MF10 rod thread size. Used for controlled lifting and counterbalancing of hatches, lids, and access panels in industrial equipment
BANSBACH EASYLIFT
Gas spring with 80 lbf force and 14 13/64 in extended length. Includes elbow end fittings. MF10 rod thread size. Used for controlled lifting and counterbalancing of hatches, lids, and access panels in industrial equipment
Gas spring with 50 lbf force, 33 15/16 in extended length, and M8 rod thread. End fittings not included. Used for counterbalancing lids, hatches, and panels in industrial equipment such as machinery guarding and access doors
BANSBACH EASYLIFT
Gas spring with 50 lbf force, 33 15/16 in extended length, and M8 rod thread. End fittings not included. Used for counterbalancing lids, hatches, and panels in industrial equipment such as machinery guarding and access doors

Customer reviews

No reviews yet — be the first

Questions & answers

No questions yet — ask us the first