BRADY 102309 Arc Flash and Shock Hazard Warning Label
The BRADY 102309 is a polyester warning label with adhesive mounting, supplied in a 100-pack. It measures 3 1/2 in x 5 in nominal sign size, 0.01 in thick, and is not retroreflective or glow-in-the-dark. The label…
SKU 3G-OTH-703029
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The BRADY 102309 is a polyester warning label with adhesive mounting, supplied in a 100-pack. It measures 3 1/2 in x 5 in nominal sign size, 0.01 in thick, and is not retroreflective or glow-in-the-dark. The label displays an arc flash and shock hazard warning requiring appropriate PPE before operating controls or opening covers.
Frequently Asked Questions
What is the BRADY 102309 arc flash label used for?
The BRADY 102309 is a polyester warning label used to mark electrical equipment with arc flash and shock hazard warnings. It reminds personnel that appropriate PPE is required before operating controls or opening covers, helping meet workplace safety compliance in industrial facilities.
What are the specifications of the BRADY 102309 label?
The BRADY 102309 label is made of 0.01 in thick polyester with adhesive mounting. It has a nominal sign size of 3 1/2 in x 5 in, is not retroreflective, and is not glow-in-the-dark. It comes in a 100-pack with manufacturer part number 102309.
Where to buy BRADY 102309 arc flash labels worldwide?
3G Electric supplies the BRADY 102309 arc flash label worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your facility. Contact us for pricing and lead time on this 100-pack polyester warning label.
How to install the BRADY 102309 adhesive sign?
Clean the mounting surface thoroughly to remove dirt and grease. Peel the backing from the BRADY 102309 adhesive label and press firmly onto a dry, smooth surface at room temperature. Avoid applying below 50 °F for best adhesion. Replace if the label becomes damaged or illegible.
Used in
Common applications for BRADYBRADY Products
3G Electric supplies BRADY warning: arc flash and shock hazard appropriate ppe required do not operate controls or open covers without appropriate personal protection equipment signs. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
You might also need
Compatible alternatives & equivalents
- BRADY Polyester adhesive sign with arc flash hazard warning text referencing NFPA 70E for minimum PPE requirements. Nominal size 3-1/2 x 5 inches, 0.01 inch thick. Not retroreflective and does not glow in the dark. Suitable for mounting on electrical enclosures and equipment to warn personnel of arc flash hazards
- BRADY Polyester adhesive sign warning of arc flash and shock hazards, requiring appropriate PPE before operating. Not retroreflective, non-glowing. Suitable for indoor use near electrical equipment to indicate safety precautions