OEM Brahma T11/M Ignition Transformer
Ignition transformers series T11 and T16 are suitable for fluid or gaseous fuel burners. Followings are the main features of this series: - various connection and fixing systems; - high discharge power (they are…
SKU 3G-CBM-07054
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
Ignition transformers series T11 and T16 are suitable for fluid or gaseous fuel burners. Followings are the main features of this series: - various connection and fixing systems; - high discharge power (they are particularly suitable in all those applications in which long ignition wires are required); - high efficiency and ignition power.
Frequently Asked Questions
What is the Brahma T11/M ignition transformer?
The Brahma T11/M is a single-pole ignition transformer from the T11 series, suitable for fluid or gaseous fuel burners. It delivers high discharge power, making it suited to applications requiring long ignition wires, with high efficiency and ignition power.
What are the specifications of the Brahma T11/M ignition transformer?
The T11/M runs on 220 V at 50 Hz (other voltages and frequencies available on request), with an operating temperature range of -10 °C to +60 °C, polyester resin isolation, 1x9 kV output peak voltage, 20 mA output effective current, 1.1 A input effective current, 33% duty cycle in 3 minutes, 240 VA power consumption and 2 kg weight. Recommended electrode distance is 3 to 5 mm and the standard supply cable length is 550 mm.
Where to buy the Brahma T11/M ignition transformer worldwide?
3G Electric supplies the Brahma T11/M ignition transformer and delivers worldwide, handling logistics, customs and delivery. Contact us with your quantity and destination for a quote and lead time.
How should the Brahma T11/M ignition transformer be installed?
The T11/M features a radio interference suppression shield that must be connected to a good ground for effectiveness, and its secondary windings are center grounded. Keep the recommended electrode distance of 3 to 5 mm. The standard supply cable is 550 mm; the high voltage connection uses a screw terminal unless otherwise specified.
Used in
Common applications for OEMOEM Products
3G Electric supplies OEM ignition & transformers. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
