BRENNAN INDUSTRIES Compression Fitting Adapter: 25 mm OD x 25 mm OD size
The BRENNAN INDUSTRIES Compression Fitting Adapter (MPN D2403-S25-S25-SS) is a flareless bite-type stainless steel compression fitting in the Volz series, configured as compression x compression with a 25 mm OD x 25…
SKU 3G-OTH-478904
Need installation or engineering help?
Ask a question
Product Description
The BRENNAN INDUSTRIES Compression Fitting Adapter (MPN D2403-S25-S25-SS) is a flareless bite-type stainless steel compression fitting in the Volz series, configured as compression x compression with a 25 mm OD x 25 mm OD size. 3G Electric interprets this demand and delivers genuine industrial equipment across 14 departments—and far more—with specialist depth in combustion, pumps, and controls as an authorised distributor for brands including Schneider, ABB, Siemens, SKF, Festo, Fluke, Interpump, and FBR.
Frequently Asked Questions
What is the BRENNAN INDUSTRIES D2403-S25-S25-SS compression fitting used for?
This flareless bite-type stainless steel compression fitting adapter connects two 25 mm OD tubes in hydraulic or pneumatic systems. It is used in industrial fluid power applications where a leak-tight, vibration-resistant joint is required, such as in instrumentation, process control, and general plant piping.
What are the specifications of the BRENNAN INDUSTRIES Volz series compression fitting?
The BRENNAN INDUSTRIES Volz series compression fitting adapter (MPN D2403-S25-S25-SS) is a flareless bite-type stainless steel fitting with compression x compression configuration. It has a 25 mm OD x 25 mm OD size and is designed for reliable tube connections in demanding industrial environments.
Where to buy the BRENNAN INDUSTRIES D2403-S25-S25-SS compression fitting worldwide?
3G Electric supplies the BRENNAN INDUSTRIES D2403-S25-S25-SS compression fitting adapter worldwide. We handle full logistics, customs clearance, and delivery to your site. As a global industrial solutions provider, we source genuine parts across 14 departments and deliver to any international destination.
How to install a flareless bite-type stainless steel compression fitting?
Insert the tube fully into the fitting until it bottoms out. Tighten the nut by hand, then use a wrench to turn the nut the specified number of flats (typically 1 to 1.25 turns) as per manufacturer instructions. Over-tightening can damage the bite ring. Always verify with a pressure test after installation.
BRENNAN INDUSTRIES Products
3G Electric supplies BRENNAN INDUSTRIES flareless bite-type stainless steel compression fittings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
