CALBRITE 316 Stainless Steel Splice Flat Plate
CALBRITE Splice Flat Plates with 4 holes, 9/16 in hole diameter, for 1 5/8 in strut channels. Made of 316 stainless steel with a polished silver finish (MPN S60000PL4S).
SKU 3G-OTH-712737
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
Compliance & shipping
- Hazardous material
- Not classified as hazardous
- California Prop 65 warning
- No warning recorded
- Licence required
- No licence required
- Safety Data Sheet
- Not available
- Special shipping
- Ships under standard freight
Need installation or engineering help?
Ask a question
Product Description
CALBRITE Splice Flat Plates with 4 holes, 9/16 in hole diameter, for 1 5/8 in strut channels. Made of 316 stainless steel with a polished silver finish (MPN S60000PL4S).
Frequently Asked Questions
What is a CALBRITE S60000PL4S splice flat plate used for?
The CALBRITE S60000PL4S splice flat plate connects two lengths of 1 5/8 in strut channel end-to-end, creating a continuous support run. Its four 9/16 in holes accept standard strut hardware. The 316 stainless steel construction resists corrosion in harsh industrial environments, making it suitable for chemical plants, marine applications, and food processing facilities.
What are the specifications of the CALBRITE S60000PL4S splice flat plate?
The CALBRITE S60000PL4S is a 316 stainless steel splice flat plate with a polished silver finish. It has four holes with a 9/16 in diameter and is designed for 1 5/8 in strut channels. The manufacturer part number is S60000PL4S. This plate provides a corrosion-resistant connection for structural support systems in demanding industrial settings.
Where to buy CALBRITE S60000PL4S splice flat plates worldwide?
3G Electric supplies the CALBRITE S60000PL4S splice flat plate to customers worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your site. Contact us for pricing and lead time on this 316 stainless steel strut channel connector.
How to install a CALBRITE S60000PL4S splice flat plate?
To install the CALBRITE S60000PL4S, align the ends of two 1 5/8 in strut channels, place the plate across the joint, and insert bolts through the 9/16 in holes. Tighten nuts to the manufacturer's recommended torque. Ensure the plate is centered for even load distribution. Use 316 stainless steel hardware to maintain corrosion resistance.
Used in
Common applications for CALBRITECALBRITE Products
3G Electric supplies CALBRITE splice flat plates. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
You might also need
Compatible alternatives & equivalents
- CALBRITE Solid wall strut channel made from 316 stainless steel with a polished finish. 12 ga gauge, single channel, no holes or slots. Used for supporting piping, conduit, and cable trays in corrosive or washdown environments
- CALBRITE This slotted back-to-back strut channel is made from 316 stainless steel with a polished silver finish. It features slotted holes for adjustability and is 14 gauge. Used for structural support in industrial framing, pipe supports, and cable tray systems