D-LINE 90 Degree Flat Elbow for Maxi Raceway 2 in x 1 in
The D-LINE 90 Degree Flat Elbow is a plastic flat bend for use with D-Line Maxi Raceway 2 in x 1 in (50x25mm) nonmetallic single-channel raceways. This white clip-over fitting, model FLFB5025W, is designed for Maxi…
SKU 3G-OTH-54431
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The D-LINE 90 Degree Flat Elbow is a plastic flat bend for use with D-Line Maxi Raceway 2 in x 1 in (50x25mm) nonmetallic single-channel raceways. This white clip-over fitting, model FLFB5025W, is designed for Maxi Raceways and provides a 90-degree directional change in the raceway system.
Frequently Asked Questions
What is the D-LINE 90 Degree Flat Elbow used for?
The D-LINE 90 Degree Flat Elbow is used to change direction by 90 degrees in a D-Line Maxi Raceway 2 in x 1 in (50x25mm) cable management system. It is ideal for routing and protecting cables in commercial and industrial installations where a neat, low-profile bend is required.
What are the specifications of the D-LINE 90 Degree Flat Elbow?
The D-LINE 90 Degree Flat Elbow, model FLFB5025W, is a white plastic flat bend for use with D-Line Maxi Raceway 2 in x 1 in (50x25mm) raceways. It features a clip-over mounting style and is made of plastic. This fitting is designed specifically for Maxi Raceways to provide a 90-degree directional change.
Where to buy the D-LINE 90 Degree Flat Elbow worldwide?
You can source the D-LINE 90 Degree Flat Elbow through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to worldwide destinations. Contact us for availability and lead time on this D-Line Maxi Raceway fitting.
How to install the D-LINE 90 Degree Flat Elbow?
To install the D-LINE 90 Degree Flat Elbow, first ensure the D-Line Maxi Raceway channel is cut cleanly at the desired bend point. Then clip the flat elbow over the raceway ends, aligning the internal guides. Press firmly until it snaps into place. No tools are required for this clip-over fitting.
Used in
Common applications for D-LINED-LINE Products
3G Electric supplies D-LINE 90 degree elbows for nonmetallic single-channel raceways. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
You might also need
Related products
- DUTTON-LAINSON Standard 3/8-inch flat washer used to distribute load and prevent damage when fastening components. Suitable for general material handling applications where a flat washer is required
- DUTTON-LAINSON This spacer is a material handling replacement part designed for use with the Dutton-Lainson DLB350A model. It maintains proper spacing and alignment in winching, towing, or lifting systems where precise component separation is required
- DUTTON-LAINSON Plastic sleeve bearing with a 1-3/8 inch size, used to reduce friction in rotating shafts on material handling equipment. Fits Dutton-Lainson brand equipment and is commonly applied in winches, trailers, and industrial machinery
- DUTTON-LAINSON Needle bearing for material handling equipment, designed to support radial loads in rotating applications. Fits Dutton-Lainson brand systems. Manufacturer part number 205133
- DUTTON-LAINSON This hardware bag is designed for use with Dutton-Lainson brand equipment. It provides storage and organization for hardware components in material handling applications. The bag is part of the Dlb Series and is identified by manufacturer part number 304236
- DUTTON-LAINSON Replacement shaft for Dutton-Lainson brand reels. Designed for use in material handling applications to support and rotate reels during winding or dispensing. Compatible with models 2Z602 and 4Z183
