Dayton Sewage Basin, Polyethylene, 30 in H, 5 in Inlet Dia., 18 in Inside Dia.
The DAYTON Sewage Basin is a polyethylene sewage basin with a 30-inch height, 5-inch inlet diameter, and 18-inch inside diameter. It is not radon mitigating and is compatible with manufacturer part number 3XA94.
SKU 3G-OTH-84537
Also listed as: 076119GIS · 076119 GIS
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The DAYTON Sewage Basin is a polyethylene sewage basin with a 30-inch height, 5-inch inlet diameter, and 18-inch inside diameter. It is not radon mitigating and is compatible with manufacturer part number 3XA94.
Frequently Asked Questions
What is the DAYTON Sewage Basin used for?
The DAYTON Sewage Basin is used in wastewater systems to collect and temporarily hold sewage or effluent before it is pumped to a higher elevation or treatment line. It is suitable for residential and light commercial sump and sewage applications where a non-radon-mitigating polyethylene basin is required.
What are the specifications of the DAYTON Sewage Basin?
The DAYTON Sewage Basin has a 30-inch height, 5-inch inlet diameter, and 18-inch inside diameter. It is made of polyethylene and is not radon mitigating. The manufacturer part number is 076119-GIS, and it is compatible with part number 3XA94. This basin is designed for use with DAYTON-compatible pump systems.
Where to buy the DAYTON Sewage Basin worldwide?
The DAYTON Sewage Basin is available to order through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to worldwide destinations. Contact 3G Electric for pricing and lead time on this polyethylene sewage basin.
How to install a DAYTON Sewage Basin?
To install the DAYTON Sewage Basin, excavate a hole slightly larger than the 18-inch basin diameter, set the basin level on a compacted gravel base, and connect the 5-inch inlet pipe. Ensure the basin is properly vented and that the pump discharge line is secured. Follow local plumbing codes and the pump manufacturer's instructions for best results.
Used in
Common applications for DaytonDayton Products
3G Electric supplies Dayton sewage basins. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
You might also need
Compatible alternatives & equivalents
- LITTLE GIANT This LITTLE GIANT sewage basin is a plastic containment vessel for indoor wastewater collection. With a 41-gallon capacity and dimensions of 22 inches diameter by 32 9/16 inches height, it accommodates a single pump. Compatible with pump model PPS3V3D, it is used in residential or light commercial drainage systems where plumbing fixtures are below the main sewer line
- LITTLE GIANT This LITTLE GIANT sewage basin is a plastic tank for indoor wastewater collection and temporary storage. It measures 22 inches in diameter by 32 9/16 inches in height and accommodates one pump. Compatible with the PPS2V3D pump model, it is used in residential or light commercial sewage systems where gravity drainage is not feasible