Dayton Effluent Pump: 1/2 hp, 120V AC, Single Phase, 45 gpm Flow Rate @ 10' of Head
The DAYTON Effluent Pump is a 1/2 hp general purpose effluent pump with a cast iron impeller, rated for 120V AC single-phase operation. It delivers a flow rate of 45 gpm at 10 feet of head and a maximum head of 45…
SKU 3G-OTH-84263
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Delivery
- Same-day or next-business-day delivery within Singapore for in-stock items; 7–14 days for factory-order parts from Europe.
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
- Ships to
- Singapore
Need installation or engineering help?
Ask a question
Product Description
The DAYTON Effluent Pump is a 1/2 hp general purpose effluent pump with a cast iron impeller, rated for 120V AC single-phase operation. It delivers a flow rate of 45 gpm at 10 feet of head and a maximum head of 45 feet. This pump does not include a switch.
Frequently Asked Questions
What is the DAYTON Effluent Pump 4HU70 used for?
The DAYTON Effluent Pump 4HU70 is a general purpose effluent pump designed for transferring wastewater and effluent in residential and light commercial applications. It handles solids up to 3/4 inch and is suitable for septic systems, dewatering, and sump pits where a submersible pump is needed.
What are the specifications of the DAYTON Effluent Pump 4HU70?
The DAYTON Effluent Pump 4HU70 has a 1/2 hp motor, 120V AC single-phase power, and a cast iron impeller. It delivers 45 gpm flow at 10 feet of head and a maximum head of 45 feet. The pump does not include a switch and has a 1-1/2 inch NPT discharge.
Where to buy the DAYTON Effluent Pump 4HU70 worldwide?
3G Electric supplies the DAYTON Effluent Pump 4HU70 worldwide. As a global industrial equipment distributor, we handle full logistics, customs clearance, and delivery to your site. Contact us for availability and lead time; we source and deliver this pump to any country.
How to install the DAYTON Effluent Pump 4HU70?
Install the DAYTON Effluent Pump 4HU70 in a sump or basin with a minimum diameter of 18 inches. Ensure the pump is submerged and the discharge pipe is properly supported. Use a check valve to prevent backflow. Since the pump does not include a switch, you must install a separate control panel or float switch.
Used in
Common applications for DaytonDayton Products
3G Electric supplies Dayton general purpose effluent pumps. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
