Dayton Set Screw Rigid Shaft Coupling, 3/8 in Bore, Round, Inch
The DAYTON Rigid Shaft Coupling is a set screw rigid shaft coupling with a 3/8 in bore diameter for both shaft ends, designed for round shafts. It features same bore dimensions and is an inch-series component. This…
SKU 3G-OTH-139954
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The DAYTON Rigid Shaft Coupling is a set screw rigid shaft coupling with a 3/8 in bore diameter for both shaft ends, designed for round shafts. It features same bore dimensions and is an inch-series component. This coupling is a non-flexible, round type from the DAYTON brand.
Frequently Asked Questions
What is the DAYTON Rigid Shaft Coupling used for?
The DAYTON Rigid Shaft Coupling is used to connect two round shafts of equal diameter (3/8 in) in power transmission applications. It provides a non-flexible, torque-transmitting joint, commonly found in conveyors, pumps, and industrial machinery where precise shaft alignment is required.
What are the specifications of the DAYTON Rigid Shaft Coupling ?
The DAYTON Rigid Shaft Coupling has a 3/8 in bore diameter for both shaft ends, with same bore dimensions. It is a round, inch-series set screw type coupling designed for round shafts. The manufacturer part number is , and it is a non-flexible rigid coupling from the DAYTON brand.
Where to buy the DAYTON Rigid Shaft Coupling worldwide?
You can source the DAYTON Rigid Shaft Coupling through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to worldwide destinations. Contact us for availability and lead time; we supply this DAYTON coupling to procurement teams and engineers globally.
How to install a DAYTON Rigid Shaft Coupling?
To install a DAYTON Rigid Shaft Coupling, ensure both shaft ends are clean and aligned. Slide the coupling over the shafts so each end is fully engaged. Tighten the set screws evenly using a hex key to the manufacturer's recommended torque. Verify shaft alignment after tightening to prevent premature wear or vibration.
Used in
Common applications for DaytonDayton Products
3G Electric supplies Dayton set screw rigid shaft couplings. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.