Dayton Below 1/2 HP Pond & Waterfall Pump
The Dayton Pond Pump (SKU 3G-OTH-92672) is a below 1/2 HP pond and garden pump with a 1/5 hp motor, 115V AC nameplate voltage, and a 2 in NPT discharge connection. Its housing is constructed from nylon with 45% glass…
SKU 3G-OTH-92672
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
Compliance & shipping
- Hazardous material
- Not classified as hazardous
- California Prop 65 warning
- Warning appliesProp 65 warning
- Licence required
- No licence required
- Safety Data Sheet
- Not available
- Special shipping
- Ships under standard freight
Need installation or engineering help?
Ask a question
Product Description
The Dayton Pond Pump (SKU 3G-OTH-92672) is a below 1/2 HP pond and garden pump with a 1/5 hp motor, 115V AC nameplate voltage, and a 2 in NPT discharge connection. Its housing is constructed from nylon with 45% glass fiber and stainless steel, and it delivers a maximum head of 19.7 ft.
Frequently Asked Questions
What is the Dayton pond pump used for?
The Dayton pond pump is designed for pond and garden water circulation, such as powering waterfalls or fountains. Its 1/5 hp motor and 19.7 ft max head make it suitable for small to medium decorative water features. The nylon with 45% glass fiber and stainless steel housing resists corrosion in outdoor environments.
What are the specifications of the Dayton pond pump?
The Dayton is a 1/5 hp pond pump with a 115V AC nameplate voltage. It has a 2 in NPT discharge connection and a maximum head of 19.7 ft. The pump housing is made of nylon with 45% glass fiber and stainless steel. It is classified as a below 1/2 HP pond and garden pump.
Where to buy the Dayton pond pump worldwide?
You can source the Dayton pond pump through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to worldwide destinations. Contact us for availability and lead time; we provide reliable sourcing for this Dayton pump model.
How to install the Dayton pond pump?
Install the Dayton pump on a stable, level surface near the pond. Connect the 2 in NPT discharge to your plumbing, ensuring a secure seal. Wire the 115V AC motor per local electrical codes, using a GFCI-protected circuit. Prime the pump before startup and check for leaks. Follow generic pond pump best practices for placement and maintenance.
Used in
Common applications for DaytonDayton Products
3G Electric supplies Dayton below 1/2 hp pond & waterfall pumps. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
