DEFELSKO ADDITIONAL 20MM DOLLIES
The DEFELSKO Dolly (20mm) is a set of 20 mm aluminum dollies supplied in a plastic tube, designed for use with the PosiTest AT adhesion tester. Each package contains 10 dollies, referenced by manufacturer part number…
SKU 3G-OTH-175293
Also listed as: ADDITIONAL20MMDOLLIES · ADDITIONAL-20MM-DOLLIES
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Delivery
- Same-day or next-business-day delivery within Singapore for in-stock items; 7–14 days for factory-order parts from Europe.
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
- Ships to
- Singapore
Need installation or engineering help?
Ask a question
Product Description
The DEFELSKO Dolly (20mm) is a set of 20 mm aluminum dollies supplied in a plastic tube, designed for use with the PosiTest AT adhesion tester. Each package contains 10 dollies, referenced by manufacturer part number ADDITIONAL 20MM DOLLIES. These dollies are compatible exclusively with the PosiTest AT model.
Frequently Asked Questions
What is the DEFELSKO Dolly (20mm) used for?
The DEFELSKO Dolly (20mm) is used for adhesion testing with the PosiTest AT pull-off adhesion tester. These 20 mm aluminum dollies are applied to a coating, then pulled to measure bond strength. They are essential for quality control in industrial coating applications.
What are the specifications of the DEFELSKO Dolly (20mm)?
The DEFELSKO Dolly (20mm) includes 20 mm aluminum dollies supplied in a plastic tube, 10 per package. The manufacturer part number is ADDITIONAL 20MM DOLLIES. These dollies are compatible exclusively with the PosiTest AT adhesion tester from DEFELSKO.
Where to buy DEFELSKO Dolly (20mm) worldwide?
You can source the DEFELSKO Dolly (20mm) worldwide through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to your location. Contact us to order the ADDITIONAL 20MM DOLLIES for the PosiTest AT.
How to install the DEFELSKO Dolly (20mm) on a PosiTest AT?
To install the DEFELSKO Dolly (20mm), clean the coating surface and the dolly base, apply a suitable adhesive, and press the dolly firmly onto the coating. Allow proper cure time per adhesive instructions, then attach the PosiTest AT tester to the dolly for pull-off testing. Follow DEFELSKO guidelines for best results.
Used in
Common applications for DEFELSKODEFELSKO Products
3G Electric supplies DEFELSKO dollies. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
You might also need
Related products
- DDS This dual-lip oil seal features a rubber-enclosed case designed for rough bore applications. It has a nitrile construction with a spring-loaded two-lip design to retain lubricants and exclude contaminants. Suitable for rotating shafts in industrial equipment such as pumps, gearboxes, and motors
- DDS This dual-lip oil seal features a reinforced metal case for installation in smooth bores. The spring-loaded two-lip configuration retains lubricants and excludes contaminants in rotating shaft applications such as gearboxes, pumps, and industrial machinery. Made of nitrile, it has an inner diameter of 185 mm, outer diameter of 215 mm, and width of 16 mm
- DDS This DDS dual-lip oil seal features a reinforced metal case designed for smooth bore housings. The TA seal design includes a spring-loaded dual-lip configuration to retain lubricants and exclude contaminants. Constructed from nitrile rubber, it has a 195 mm inner diameter, 230 mm outer diameter, and 16 mm width. Typical applications include sealing rotating shafts in industrial gearboxes, pumps, and motors
- DDS This dual-lip oil seal features a rubber-enclosed case designed for rough bores. It is constructed from nitrile and includes a spring for enhanced sealing. Typical applications include retaining lubricants and excluding contaminants in rotating shafts such as those in gearboxes, pumps, and motors
- DDS Dual-lip oil seal with rubber-enclosed case designed for rough bores. Features two sealing lips with a spring for enhanced sealing performance. Made of nitrile material. Inner diameter 320 mm, outer diameter 360 mm, width 20 mm. Type TF. Suitable for use in rotating shaft applications such as pumps, gearboxes, and motors
- DDS Dual-lip oil seal with rubber-enclosed case designed for rough bore applications. Features a TC design with nitrile rubber lip and spring-loaded dual-lip configuration. Inner diameter 380 mm, outer diameter 420 mm, width 20 mm. Suitable for sealing rotating shafts in industrial equipment such as gearboxes, pumps, and motors
