DEKTITE DFE105G Square Base Roof Vent Pipe Boot, 12:12 Pitch, EPDM Collar
The DEKTITE 12.25"H-W Alum Roof Vent Pipe Boot is a rectangular-base boot designed for pitched roofs with a 12:12 roof pitch and a single pipe. This product features an open top opening and an EPDM collar material…
SKU 3G-OTH-76224
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Delivery
- Same-day or next-business-day delivery within Singapore for in-stock items; 7–14 days for factory-order parts from Europe.
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
- Ships to
- Singapore
Need installation or engineering help?
Ask a question
Product Description
The DEKTITE 12.25"H-W Alum Roof Vent Pipe Boot is a rectangular-base boot designed for pitched roofs with a 12:12 roof pitch and a single pipe. This product features an open top opening and an EPDM collar material, with the manufacturer part number DFE105G.
Frequently Asked Questions
What is the DEKTITE DFE105G roof vent pipe boot used for?
The DEKTITE DFE105G roof vent pipe boot seals around a single pipe on a pitched roof with a 12:12 pitch. It is used in commercial and residential roofing to prevent water intrusion at pipe penetrations, using an EPDM collar for weathertight sealing.
What are the specifications of the DEKTITE DFE105G roof vent pipe boot?
The DEKTITE DFE105G has a 12.25-inch square aluminum base, an open top opening, and an EPDM collar. It is designed for a 12:12 roof pitch and accommodates one pipe. The manufacturer part number is DFE105G.
Where to buy the DEKTITE DFE105G roof vent pipe boot worldwide?
3G Electric supplies the DEKTITE DFE105G roof vent pipe boot worldwide. As a global industrial equipment distributor, we handle full logistics, customs clearance, and delivery to your site. Contact us for availability and lead time.
How to install the DEKTITE DFE105G roof vent pipe boot?
Install the DEKTITE DFE105G by sliding the boot over the pipe so the base sits flat on the roof deck. Secure the aluminum base with roofing fasteners, then seal the EPDM collar around the pipe with compatible sealant. Follow local roofing codes for best results.
Used in
Common applications for DEKTITEDEKTITE Products
3G Electric supplies DEKTITE rectangular-base boots. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
You might also need
Related products
- DEWALT DEWALT DEWALT DEWALT Protective Rubber Boot for DCF964: High-Torque Impact Wrench Compatible (MPN PB964B)
- DEWALT DEWALT This rubber boot is designed to fit DEWALT DCF891 and DCF892 mid-range impact wrenches. It provides a protective cover that helps shield the tool from impacts and debris during operation. Suitable for use in automotive repair, construction, and maintenance environments
- DDS Dual-lip oil seal with rubber-enclosed case for rough bores, spring-loaded, made of nitrile. ID 220 mm, OD 250 mm, width 15 mm. Used in rotating equipment such as pumps, gearboxes, and motors to prevent lubricant leakage and contaminant ingress
- DDS This dual-lip oil seal features a rubber-enclosed case designed for rough bores. It is a TC-type seal with a spring, made of nitrile rubber, with an inner diameter of 355 mm, outer diameter of 380 mm, and width of 15 mm. Suitable for rotating shafts in industrial gearboxes, pumps, and heavy machinery requiring metric-sized seals
- DDS This dual-lip oil seal features a rubber-enclosed case designed for rough bores and a spring-loaded design. It is made of nitrile material with an inside diameter of 0.313 in, an outside diameter of 0.75 in, and a width of 0.25 in. Suitable for sealing rotating shafts in industrial equipment such as pumps, gearboxes, and motors, preventing lubricant leakage and excluding contaminants
- DDS Dual-lip oil seal with rubber-enclosed case designed for rough bore applications. Type TC with fluoro material, featuring inner diameter 195 mm, outer diameter 230 mm, and width 15 mm. Used to seal rotating shafts in industrial equipment such as pumps, gearboxes, and motors, preventing oil leakage and contaminant ingress