DIXON VALVE & COUPLING Type DC Forged Brass Cam & Groove Dust Cap
The DIXON VALVE & COUPLING Type DC Forged Brass Cam & Groove Dust Cap (SKU BH300EZ, MPN BH300EZ) is a 3-inch coupling-size dust cap with a maximum working pressure of 125 psi at 70°F and an overall length of 3 1/8…
SKU 3G-OTH-451468
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The DIXON VALVE & COUPLING Type DC Forged Brass Cam & Groove Dust Cap (SKU BH300EZ, MPN BH300EZ) is a 3-inch coupling-size dust cap with a maximum working pressure of 125 psi at 70°F and an overall length of 3 1/8 inches. It features a Nitrile gasket material.
Frequently Asked Questions
What is a DIXON VALVE & COUPLING Type DC Forged Brass Cam & Groove Dust Cap used for?
This dust cap seals the end of a cam-and-groove coupling when not in use, protecting the internal components from dirt, debris, and moisture. It is commonly used in industrial fluid-transfer systems, including chemical, petroleum, and agricultural applications, where a secure, leak-proof seal is required.
What are the specifications of the DIXON VALVE & COUPLING BH300EZ dust cap?
The BH300EZ dust cap has a 3-inch coupling size, a maximum working pressure of 125 psi at 70°F, and an overall length of 3 1/8 inches. It is made of forged brass with a Nitrile gasket material. The manufacturer part number is BH300EZ, and it is part of the Type DC series from DIXON VALVE & COUPLING.
Where to buy DIXON VALVE & COUPLING dust caps worldwide?
3G Electric supplies DIXON VALVE & COUPLING dust caps worldwide. As a global industrial equipment distributor, we handle full logistics, customs clearance, and delivery to your location. Contact us for availability and lead times. We source and deliver genuine DIXON VALVE & COUPLING components to any country.
How to install a DIXON VALVE & COUPLING cam-and-groove dust cap?
To install, ensure the coupling end is clean and free of debris. Align the dust cap with the coupling groove and press it firmly into place until the cam arms lock over the cap. For removal, lift the cam arms and pull the cap straight off. Always verify the gasket is seated properly to maintain the pressure rating of 125 psi.
Used in
Common applications for DIXON VALVE & COUPLINGDIXON VALVE & COUPLING Products
3G Electric supplies DIXON VALVE & COUPLING type dc forged brass cam & groove dust caps. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.