DUNGS GW...A4 HP - Pressure Switches for gas, air, flue

[{"filename":"gw-a4-hp_manual_us_272812.pdf","text":"GW A4/2 HP SGS\n Gas Pressure Switch USA CDN\n Installation Instructions\n\n\n\n Table of Contents\n Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . Page 1\n Approvals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 1\n Attention . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 1\n Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 2\n Model Description & Part Number . . . . . . . . . . Page 2\n Mounting and Pressure Connection . . . . . . . . Page 3\n Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 3\n Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 3\n Adjustment & Reset . . . . . . . . . . . . . . . . . . . . . . Page 4\n Installation Position . . . . . . . . . . . . . . . . . . . . . . Page 4\n Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 5\n Maintenance & Testing . . . . . . . . . . . . . . . . . . . Page 5\n Accessories & Replacement . . . . . . . . . . . . . . . Page 6\n\n\n\n Approvals\n CSA Certified:\n \t\t CSA C22.2 No.14\n \t\t CSA C22.2 No.0\n \t\t UL 508\n File # 2620681\n\n\n\n\n Attention\n The installation and maintenance Check the ratings in the specifica-\n of this product must be done tions to verify that they are suit-\n under the supervision of an ex- able for your application.\n perienced and trained specialist.\n Never perform work if gas pres- [V] [A]\n sure or power is applied, or in [Hz] [VA]\n the presence of an open flame.\n\n\n\n\n MC • Karl Dungs, Inc. • GW A4/2 HP SGS • Edition 2024.04 • P/N 272812 • Rev. -0\n Please read the instruction be- On completion of work on the\n fore installing or operating. Keep Safety pressure switch, perform a leak-\n the instruction in a safe place. You\n first age and function test.\n\n\n O.K.\n find the instruction also at www.\n dungs.com. If these instructions\n are not heeded, the result may\n be personal injury or damage to\n property.\n Any adjustment and application- This product is intended for\n specific adjustment values must IFGC installations covered by, but not\n be made in accordance with CSA limited to, the following fuel gas\n the equipment manufacturers UL codes and standards: NFPA 54\n instructions. ANSI or IFGC (International Fuel Gas\n NFPA Code) or the following equipment\n codes and standards: NFPA 37,\n NFPA 85, NFPA 86, ANSI Z83.4/\n CSA 3.7, ANSI Z83.18/CSA 4.9,\n Explanation of symbols ANSI Z21.13, CSD-1.\n\n 1, 2, 3 ... = Action\n • = Instruction\n1…6\n\f Specification\n GW...HP SGS High/Low ventless gas pressure switch (SPDT). Pressure acts via the diaphragm against the force of the\n setting spring on the microswitch. The pressure switch operates without any auxiliary power.\n\n Max. Operating Pressure (MOP) Ambient / Medium Temperature\n GW 500\t\t 2* bar (30 PSI) °F Ambient: +5 °F ... +158 °F\n +153\n GW 500\t\t 5* bar (75 PSI) (-15 °C ... +70 °C)\n GW 2000\t\t 5 bar (75 PSI) Medium: +5 °F ... +158 °F\n 0\n GW 6000\t\t 8 bar (120 PSI) (-15 °C ... +70 °C)\n -40\n [PSI] 2* bar @ setting 0.1 - 0.15 bar Storage: -22 °F ... +185 °F\n 5* bar @ setting 0.15 - 5 bar (-30 °C ... +85 °C)\n * to stay within the switch setting toler- Gases\n ance over the useful life of the switch. Dry, natural gas, propane, butane;\n other noncorrosive gases.\n Gas\n Suitable for biogases up to 1.0 % by\n volume, wet H2S at + 35 °C (subject\n to gas analysis of the installation) and\n Electrical Connection flue gases of biogas installations up to\n Screw terminals via M 20 x 1.5 0.1 % by volume, wet SO2 at + 35 °C.\n conduit connection\n Proven suitability for barn atmos-\n [V] [A] phere in accordance with DIN EN\n [Hz] [VA]…