DYKEM 83314 Aerospace Torque Marking Paste, Orange, BMS8-45H Type I/III
The DYKEM Torque Marking Paste (MPN 83314) is an aerospace torque marking paste with a dry time of less than 1 hour. It meets BMS8-45H, Type I/III specifications and is compliant with Embraer PN/Specification MEP…
SKU 3G-OTH-290064
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
Compliance & shipping
- Hazardous material
- Yes — hazmat handling and paperwork applyHazardous Material
- California Prop 65 warning
- Warning appliesProp 65 warning
- Licence required
- No licence required
- Safety Data Sheet
- Not available
- Special shipping
- Ships under standard freight
Need installation or engineering help?
Ask a question
Product Description
The DYKEM Torque Marking Paste (MPN 83314) is an aerospace torque marking paste with a dry time of less than 1 hour. It meets BMS8-45H, Type I/III specifications and is compliant with Embraer PN/Specification MEP 09-096 Rev. G. This orange paste is approved as an organic F-925 torque seal replacement part.
Frequently Asked Questions
What is DYKEM Torque Marking Paste used for?
DYKEM Torque Marking Paste is used in aerospace maintenance to visually verify that fasteners have not loosened after torquing. It provides a tamper-evident seal on critical bolted joints, helping inspectors confirm torque integrity during assembly and routine inspections.
What are the specifications of DYKEM Torque Marking Paste 83314?
DYKEM Torque Marking Paste MPN 83314 is an orange paste with a dry time of less than 1 hour. It meets BMS8-45H, Type I/III specifications and is compliant with Embraer PN/Specification MEP 09-096 Rev. G. It is approved as an organic F-925 torque seal replacement part.
Where to buy DYKEM Torque Marking Paste worldwide?
3G Electric supplies DYKEM Torque Marking Paste worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your facility. Contact us to order MPN 83314 for your aerospace torque marking needs.
How to apply DYKEM Torque Marking Paste?
Apply DYKEM Torque Marking Paste to a clean, dry fastener after torquing. Use a brush or applicator to place a thin stripe across the bolt head and mating surface. Allow less than 1 hour to dry. Inspect the stripe during maintenance; any cracking or misalignment indicates possible loosening.
Used in
Common applications for DYKEMDYKEM Products
3G Electric supplies DYKEM aerospace torque marking pastes. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
You might also need
Compatible alternatives & equivalents
- DYKEM White organic torque marking paste with a dry time of less than 1 hour. Used to visually indicate that a fastener has been torqued or tampered with in aerospace and industrial applications. Complies with BMS8-45H Type I/III and Embraer MEP 09-096 Rev. G specifications. Approved as an organic replacement for F-925 Torque Seal
- DYKEM This UV-visible ink marker features a bullet tip with a 1/2 in tip width and valve actuation for controlled ink flow. The clear ink dries in 45 seconds to 1 minute, making it suitable for marking parts and surfaces in industrial settings where UV light is used for inspection and traceability