DYNABRADE Contact Arm: 1/4 in Belt Wd
The DYNABRADE Contact Arm (MPN 11702) is a belt sander contact arm for 1/4 in belt width and 24 1/32 in belt length, designed for the Dynafile III Series. It features a radiused profile and a 1/2 in wheel diameter…
SKU 3G-OTH-158614
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Delivery
- Same-day or next-business-day delivery within Singapore for in-stock items; 7–14 days for factory-order parts from Europe.
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
- Ships to
- Singapore
Need installation or engineering help?
Ask a question
Product Description
The DYNABRADE Contact Arm (MPN 11702) is a belt sander contact arm for 1/4 in belt width and 24 1/32 in belt length, designed for the Dynafile III Series. It features a radiused profile and a 1/2 in wheel diameter. This OEM component is identified by attribute 15300 and is not compatible with unspecified accessories.
Frequently Asked Questions
What is the DYNABRADE Contact Arm 11702 used for?
The DYNABRADE Contact Arm 11702 is a belt sander contact arm for the Dynafile III Series. It is used for precision grinding, deburring, and finishing on metal, wood, and composite surfaces. Its radiused profile and 1/2 in wheel diameter enable access to tight contours and corners.
What are the specifications of the DYNABRADE Contact Arm 11702?
The DYNABRADE Contact Arm 11702 has a 1/4 in belt width and 24 1/32 in belt length. It features a radiused profile, a 1/2 in wheel diameter, and is designed for the Dynafile III Series. The OEM part number is 11702, with attribute 15300. It is not compatible with unspecified accessories.
Where to buy the DYNABRADE Contact Arm 11702 worldwide?
You can source the DYNABRADE Contact Arm 11702 through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to worldwide destinations. Contact us for availability and lead time; we provide this OEM DYNABRADE component for your Dynafile III Series.
How to install the DYNABRADE Contact Arm on a Dynafile III?
To install the DYNABRADE Contact Arm 11702 on a Dynafile III, first disconnect power. Remove the existing arm by loosening the mounting screw. Align the new arm's slot with the tool's pivot pin, then tighten the screw securely. Ensure the belt tracks properly before use. Refer to the Dynafile III manual for torque specs.
Used in
Common applications for DYNABRADEDYNABRADE Products
3G Electric supplies DYNABRADE belt sander contact arms. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
