ELECTRIDUCT CP-RPS-517-YL 5-Channel Hinged-Cover Cable Ramp
The ELECTRIDUCT Cable Protector: 5 Channels is a 5-channel hinged-cover cable ramp, model CP-RPS-517-YL. This rubber straight-section ramp in black/yellow accommodates cables up to 1 3/8 in maximum diameter, with a…
SKU 3G-OTH-52112
Also listed as: CPRPS517YL · CP RPS 517 YL
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
Compliance & shipping
- Hazardous material
- Not classified as hazardous
- California Prop 65 warning
- No warning recorded
- Licence required
- No licence required
- Safety Data Sheet
- Not available
- Special shipping
- Ships under standard freight
Need installation or engineering help?
Ask a question
Product Description
The ELECTRIDUCT Cable Protector: 5 Channels is a 5-channel hinged-cover cable ramp, model CP-RPS-517-YL. This rubber straight-section ramp in black/yellow accommodates cables up to 1 3/8 in maximum diameter, with a width of 23 1/2 in and height of 3 in.
Frequently Asked Questions
What is the ELECTRIDUCT Cable Protector: 5 Channels used for?
The ELECTRIDUCT Cable Protector: 5 Channels is a hinged-cover cable ramp used to protect hoses and cables from vehicle traffic at construction sites, events, and industrial facilities. Its 5 channels accommodate cables up to 1 3/8 in diameter, and the black/yellow rubber design provides high visibility and slip resistance.
What are the specifications of the ELECTRIDUCT Cable Protector: 5 Channels?
The ELECTRIDUCT Cable Protector: 5 Channels (MPN CP-RPS-517-YL) is a rubber straight-section cable ramp in black/yellow. It has 5 hinged channels, a width of 23 1/2 in, a height of 3 in, and accepts cables up to 1 3/8 in maximum diameter. The hinged cover allows easy cable access without removing the ramp.
Where to buy the ELECTRIDUCT Cable Protector: 5 Channels worldwide?
3G Electric supplies the ELECTRIDUCT Cable Protector: 5 Channels worldwide. As a global industrial equipment distributor since 1990, we handle full logistics, customs clearance, and delivery to your site. Contact us for availability and lead time on this model CP-RPS-517-YL.
How to install the ELECTRIDUCT Cable Protector: 5 Channels?
To install the ELECTRIDUCT Cable Protector: 5 Channels, place the ramp on a clean, level surface with the hinged side up. Open the cover, lay cables in the channels, then close and secure the cover. Ensure the ramp lies flat to prevent tripping. For permanent installations, anchor the ramp if needed.
Used in
Common applications for ELECTRIDUCTELECTRIDUCT Products
3G Electric supplies ELECTRIDUCT 5-channel hinged-cover cable ramps. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
