ELECTRIDUCT Heat Shrink End Caps: 100 Pk, 0.8 in I.D. Before Shrinking
The ELECTRIDUCT Heat Shrink End Caps (100 Pk, MPN HSEC-075-BK-100PK) are end caps with a 3:1 shrink ratio, a temperature range of -55°C to 110°C, and an inner diameter of 0.8 in before shrinking and 0.29 in after…
SKU 3G-OTH-53318
Also listed as: HSEC075BK100PK · HSEC 075 BK 100PK
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Delivery
- Same-day or next-business-day delivery within Singapore for in-stock items; 7–14 days for factory-order parts from Europe.
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
- Ships to
- Singapore
Need installation or engineering help?
Ask a question
Product Description
The ELECTRIDUCT Heat Shrink End Caps (100 Pk, MPN HSEC-075-BK-100PK) are end caps with a 3:1 shrink ratio, a temperature range of -55°C to 110°C, and an inner diameter of 0.8 in before shrinking and 0.29 in after shrinking. These caps are supplied in a pack size of 100.
Frequently Asked Questions
What are ELECTRIDUCT heat shrink end caps used for?
ELECTRIDUCT heat shrink end caps seal and insulate the ends of cables, wires, or conduits. They provide environmental protection against moisture, dust, and abrasion in industrial electrical installations, control panels, and junction boxes.
What are the specifications of ELECTRIDUCT heat shrink end caps?
The ELECTRIDUCT HSEC-075-BK-100PK end caps have a 3:1 shrink ratio, an inner diameter of 0.8 in before shrinking and 0.29 in after shrinking, and a temperature range of -55°C to 110°C. They come in a pack of 100.
Where to buy ELECTRIDUCT heat shrink end caps worldwide?
You can source ELECTRIDUCT heat shrink end caps from 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to worldwide destinations, ensuring your order arrives reliably.
How to install ELECTRIDUCT heat shrink end caps?
Slide the cap over the cable end, then apply heat evenly using a heat gun or torch until the cap shrinks tightly around the insulation. Allow it to cool completely. Ensure the cable surface is clean and dry before installation for a secure seal.
Used in
Common applications for ELECTRIDUCTELECTRIDUCT Products
3G Electric supplies ELECTRIDUCT heat shrink end caps. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
