ELECTRIDUCT Heat Shrink End Caps: 25 Pk, 1.56 in I.D. Before Shrinking
The ELECTRIDUCT Heat Shrink End Caps (25-pack, SKU HSEC-150-UV-RD-25PK) are UV light resistant shrink tubing caps with a 3:1 shrink ratio, a temperature range of -55°C to 110°C, and an inner diameter of 1.56 inches…
SKU 3G-OTH-53503
Also listed as: HSEC150UVRD25PK · HSEC 150 UV RD 25PK
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Delivery
- Same-day or next-business-day delivery within Singapore for in-stock items; 7–14 days for factory-order parts from Europe.
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
- Ships to
- Singapore
Need installation or engineering help?
Ask a question
Product Description
The ELECTRIDUCT Heat Shrink End Caps (25-pack, SKU HSEC-150-UV-RD-25PK) are UV light resistant shrink tubing caps with a 3:1 shrink ratio, a temperature range of -55°C to 110°C, and an inner diameter of 1.56 inches before shrinking and 0.59 inches after shrinking (MPN HSEC-150-UV-RD-25PK).
Frequently Asked Questions
What are ELECTRIDUCT Heat Shrink End Caps used for?
ELECTRIDUCT Heat Shrink End Caps seal and insulate the ends of cables, wires, or conduits in industrial electrical systems. They are UV light resistant, making them suitable for outdoor or exposed applications where protection from sunlight and moisture is required.
What are the specifications of ELECTRIDUCT Heat Shrink End Caps?
The ELECTRIDUCT Heat Shrink End Caps (MPN HSEC-150-UV-RD-25PK) have a 3:1 shrink ratio, a temperature range of -55°C to 110°C, and an inner diameter of 1.56 inches before shrinking and 0.59 inches after shrinking. They are UV light resistant and come in a pack of 25.
Where to buy ELECTRIDUCT Heat Shrink End Caps worldwide?
You can source ELECTRIDUCT Heat Shrink End Caps through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to worldwide destinations. Contact us for availability and lead times.
How to install ELECTRIDUCT Heat Shrink End Caps?
To install, slide the end cap over the cable or conduit end, then apply heat evenly using a heat gun until the cap shrinks tightly around the material. Ensure the temperature stays within the -55°C to 110°C range. Allow to cool before handling.
Used in
Common applications for ELECTRIDUCTELECTRIDUCT Products
3G Electric supplies ELECTRIDUCT heat shrink end caps. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
