ELECTRIDUCT Heat Shrink End Caps
The ELECTRIDUCT Heat Shrink End Caps (10-pack, SKU HSEC-VAL-400-BK-10PK, MPN HSEC-VAL-400-BK-10PK) are industrial-grade end caps with a 3:1 shrink ratio, a 3.94-inch inner diameter before shrinking, and a 1.97-inch…
SKU 3G-OTH-53593
Also listed as: HSECVAL400BK10PK · HSEC VAL 400 BK 10PK
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The ELECTRIDUCT Heat Shrink End Caps (10-pack, SKU HSEC-VAL-400-BK-10PK, MPN HSEC-VAL-400-BK-10PK) are industrial-grade end caps with a 3:1 shrink ratio, a 3.94-inch inner diameter before shrinking, and a 1.97-inch inner diameter after shrinking. They operate within a temperature range of -55°C to 110°C.
Frequently Asked Questions
What are ELECTRIDUCT Heat Shrink End Caps used for?
ELECTRIDUCT Heat Shrink End Caps seal and protect cable ends, conduit terminations, and electrical connections from moisture, dust, and corrosion in industrial environments. They are commonly applied in power distribution, control panels, and outdoor installations where reliable insulation and environmental sealing are required.
What are the specifications of ELECTRIDUCT Heat Shrink End Caps?
These end caps have a 3:1 shrink ratio, a 3.94-inch inner diameter before shrinking, and a 1.97-inch inner diameter after shrinking. They operate from -55°C to 110°C. The pack contains 10 pieces. The manufacturer part number is HSEC-VAL-400-BK-10PK.
Where to buy ELECTRIDUCT Heat Shrink End Caps worldwide?
3G Electric supplies ELECTRIDUCT Heat Shrink End Caps worldwide. As a global industrial equipment distributor, we handle full logistics, customs clearance, and delivery to your location. Contact us for availability and lead time. We source and deliver these end caps to support your project needs.
How to install ELECTRIDUCT Heat Shrink End Caps?
Slide the end cap over the cable or conduit end before shrinking. Apply heat evenly using a heat gun or torch, starting from the closed end and moving toward the open end. The cap will shrink to a tight fit around the substrate. Allow to cool completely before handling. Follow standard heat-shrink installation safety practices.
Used in
Common applications for ELECTRIDUCTELECTRIDUCT Products
3G Electric supplies ELECTRIDUCT heat shrink end caps. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
