ELESA RB51 Hole Reducing Sleeve for Position Indicators
The ELESA Hole Reduction Sleeve (Series RB51, MPN CE.85950) is a black oxide coated steel hole reducing sleeve for position indicators. It has an 8 mm bore diameter, fits a 14 mm bore, and weighs 17 g.
SKU 3G-OTH-28767
Also listed as: CE85950 · CE 85950 · CE-85950
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The ELESA Hole Reduction Sleeve (Series RB51, MPN CE.85950) is a black oxide coated steel hole reducing sleeve for position indicators. It has an 8 mm bore diameter, fits a 14 mm bore, and weighs 17 g.
Frequently Asked Questions
What is the ELESA Hole Reduction Sleeve used for?
The ELESA Hole Reduction Sleeve (Series RB51, MPN CE.85950) is used to adapt position indicators with an 8 mm bore to fit a 14 mm mounting hole. It is commonly applied in industrial machinery and equipment where precise alignment and secure mounting of indicators is required.
What are the specifications of the ELESA Hole Reduction Sleeve?
The ELESA Hole Reduction Sleeve (Series RB51, MPN CE.85950) has an 8 mm bore diameter, fits a 14 mm bore, and weighs 17 g. It is made of black oxide coated steel. These specs ensure compatibility with ELESA position indicators and similar devices.
Where to buy the ELESA Hole Reduction Sleeve worldwide?
You can source the ELESA Hole Reduction Sleeve (MPN CE.85950) through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to worldwide destinations. Contact us for availability and lead time.
How to install the ELESA Hole Reduction Sleeve?
To install the ELESA Hole Reduction Sleeve, insert it into the 14 mm bore of the position indicator housing. Ensure the sleeve is fully seated and aligned. Then mount the indicator shaft through the 8 mm bore. Use standard tools; no special equipment is required. Follow ELESA's generic installation guidelines.
Used in
Common applications for ELESAELESA Products
3G Electric supplies ELESA hole reducing sleeves for position indicators. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
You might also need
Compatible alternatives & equivalents
- OILITE Lubricated general purpose metallic sleeve bearing made from SAE 841 bronze. Features a 1/4 in bore, 5/16 in OD, and 1/2 in length. Operates within -35°F to 300°F. Suitable for low-speed, high-load applications such as conveyors, pumps, and industrial machinery. Sold in a pack of 10
- OILITE Lubricated general purpose metallic sleeve bearing made from SAE 841 bronze. Features a 3/8 in bore, 1/2 in OD, and 1/2 in length. Suitable for rotating or oscillating shafts in industrial machinery, conveyors, and pumps. Operating temperature range -35°F to 300°F. Sold in a pack of 10
