Fireye Simplicity 65UV5 UV Flame Scanner

[{"filename":"MF-00-2-2000-0-019-B_Simplicity_Flame_Scanner.pdf","text":"Simplicity™\nFlame Scanners\n\nIntegrated Flame Scanner\nwith internal flame relay\n65UV5-1004 / 3G-OTH-02853-1004E\nReliable flame scanning with\nminimal set up\n\nThe Fireye Simplicity self-checking scanners are\nused to detect ultraviolet emissions from fossil fuel\nflames such as natural gas, coke oven gas, propane,\nmethane, butane, kerosene, light petroleum distillates\nand diesel fuels.\n\nThe flame scanner is available with a one-second\n(“E” version) or four-second (non-“E” version) flame\nfailure response time (FFRT) depending on the model\nselected.\n\nFeatures\n • Fully integrated design – a true one-piece system\n • No programming and minimal setup – “out-of-the-box” operation\n • Superb detection, sensitivity and wide angle of view\n • Field proven and reliable technology\n • Worldwide safety agency approvals\n • Rugged NEMA 4X (IP66) housing\n • Hazardous area classification\n • Truly economical solution\n • Two versions covering world-wide applications\n\n\n\n\nfireye.com\n\fSimplicity\nFlame Scanners\nSpecifications\n\n MECHANICAL ELECTRICAL\n Cast aluminum with black polyester Minimum: 10 mA @ 5 Vdc\n Housing Material Contact Rating\n powder coat finish Maximum: 2 A @ 30 Vdc, 2 A @ 240 Vac\n Housing Weight 4 lbs. (2kg) 4-20mA dc current, referenced to 24 VDC\n Environmental NEMA 4X, IP66 Analog Output common, maximum connected load 750\n ohms\n Mounting\n One (1) internal 2-color LED:\n Model 1004 1” NPT female pipe mount with 3/4” NPT Status Indication\n “Flame Signal”, “Fault”\n female cooling air connection\n Model 1004E 1” BSP female pipe mount with 3/4” BSP INTERNAL CABLE SPECIFICATION\n female cooling air connection Eight (8) Conductors #18 AWG, color coded\n Hazardous PVC, meets UL PLTC Class I, Div 2, no\n Classification Jacket\n conduit required, UV and oil resistant\n Model 1004 Class I Div 2, Groups A, B, C, D, Outside Diameter 0.383” NOM.\n T4A TA = 65°C\n Class II Div 2, Groups F & G, Cable Temperature\n -13°F to +221°F (-25°C to +105°C)\n T4A TA= 65°C Rating\n Model 1004E Ex II 3 G/D Ex nA IIC T4A\n Dimensions 4.37” (123.67mm) 7.39” (187.58mm)\n COOLING/PURGE AIR REQUIREMENTS 2.07\n (52.4\n Source Clean, dry, cool 0.2” (6mm)\n 3.93” (99.82mm)\n 4SCFM (113 l/min) at 3/4” threaded\n mounting flange, or 1” “Y” fitting, mounted\n on scanner sight pipe. Temperature near\n Volume\n the upper limit of the scanner operating 4.74”\n (120.4mm)\n range and/or use with dirty/dusty fuels\n may require up to 15 SCFM (425 l/min)\n Adequate to overcome furnace or LED\n Pressure VIEWING\n windbox pressure PORT\n\n Temperature Rating -40°F to +150°F (-40°C to +65°C)\n 0% to 95% relative humidity, non-\n Humidity\n condensing 4.37” (123.67mm) 7.39” (187.58mm)\n 2.07”\n (52.45mm)\n ELECTRICAL 0.2” (6mm)\n 3.93” (99.82mm)\n 24 Vdc, +10%,\n Input Power\n -15% supply current 100 mA\n 1.18” (29.85mm)\n Cable gland and 10 ft. (3m) of captive\n Electrical Connection 4.74”\n eight conductor cable (120.4mm)\n\n\n Flame Relay Ouput SPDT (1 N.O., 1 N.C.)\n 1” NPT OR\n 1” BSP THREAD\n Fault Relay Output SPST (1 N.O.) LED\n VIEWING\n PORT 3/4” NPT OR\n 3/4” BSP THREAD\n\n\n\n\nFor more information, please contact your local Fireye Distributor.\nfireye.com\nMF-00-2-2000-0-019-B (2024/08)\nAll trademarks and service marks referred herein are property of their respective owners.\n©2024 Fireye. All Rights Reserved.\n\n Join us on"}]