Fireye SureFire II High Tension Spark & Sense Igniter

[{"filename":"MF-00-2-0080-0-035-B_SureFire_II_HT.pdf","text":"SureFire™ II\nIgniters & Pilots\n\nHigh Tension Igniter & High Tension\nwith ‘spark & sense’ Igniter\nHTI / HTSS\nDesigned to ignite a mixture of various types\nof gaseous fuels with air\n\nThe Fireye SureFire II High Tension Igniters are a reliable\nsource of ignition for natural and forced draught gas igniters\nand pilots as well as small capacity gas burners. They are\ndesigned to ignite a mixture of various types of gaseous fuels\nwith air.\n\nTypical fuel gases for the igniters are: natural gas, propane\nor LPG gases. Please consult with Fireye for applications\nthat are subject to refinery ‘off’ gases, including:\n\n • High hydrogen content\n • Sulfur compounds such as hydrogen sulphide\n • Oher chemicals which increase the corrosion rate and\n waste gases, including low calorific value, wet and/or\n dirty gases\n\nThe high tension with ‘spark & sense’ igniter can be used\nas an igniter with an additional flame safeguard for flame\ndetection. The flame detection method used in the high\ntension with ‘spark & sense’ igniter is called ionization\n(rectification) method. The principle measures the ionization\ncurrent in electrically conductive ionized gas in a flame.\n\nFeatures\n • The design of the unit provides a very stable electric arc\n and repeatable ignition\n • The use of interchangeable tips and no adjustment parts\n help ensure long operation with low maintenance costs\n • This type of igniter rod design provides trouble-free\n reliable performance in gas applications\n • Spark & sense feature (-SS) allows for flame sensing via\n flame rod\n • Available in hazardous area option\n\n\n\n\nfireye.com\n\fSureFire II\nIgniters & Pilots\n\nSpecifications\n\n Power Supply Voltage, Current 230/110 (115) VAC (50/60 Hz); 0.5/1.2 A (230/110 VAC)\n Ignition HT Transformers Input / Output/ Weight / Dimensions (LxWxD)\n P/N TX-230-8000 230 VAC at 0.5A / 8,000 VAC, 15 mA, 100% duty cycle / 1.8 kg / 107 x 87 x 64\n P/N TX-110-8000 110/115 VAC at 1.2A / 8,000 VAC, 15 mA, 100% duty cycle / 1.8 kg / 107 x 87 x 64\n Method of Operation Electrical arc\n Ignition Control Signal 24 VDC, maximum 12 A (20A peak)\n Available Rod Insertion Length L1 0.65 ÷ 3.15 m\n Rods and Tips Outer Diameter / Material Ø 16 mm / 316 SS\n Rods Optimal Electrical Operation Parameters 15-20 mA at 7,500 - 10,000 V\n Rods and Tips Operating Temperature / IP Rating / Weight\n P/N HTSS-xxx-J -40° C to +100°C / IP67 (j. box), +200°C rod tube / L1 = 0.65 m - 0.77 kg\n P/N HTSS-xxx-CEX -40° C to +80°C / IP66 (cable entry), +200°C rod tube / L1 = 0.65 m - 1.00 kg\n P/N HTSS-xxx-J-CEX -40° C to +80°C / IP66 (j. box), +200°C rod tube / L1 = 0.65 m - 1.73 kg\n Rods Weight Adder Approximately 0.44 kg / meter\n Tip P/N HTR-TIP Length 160 mm, 0.16 kg; caution: used on rods length L=0.5, 0.6, 0.7 only\n Tip P/N HTR-TIP-L Length 460 mm, 0.32 kg\n +300°C tip continuously, over +1,000°C in flame for short period central Kanthal\n Tip Operating Temperature\n electrode over +1,000°C continuously\n Power Packs Operating Temperature / IP Rating / Weight / Material\n P/N HTSS-PP-230/110 -40° C to +65°C / IP66 / 6 kg / c. steel powder-coated or option stainless steel\n P/N HTSS-PP-230/110-CEX -40° C to +65°C / IP66 / 20 kg / cast aluminum powder-coated or option stainless steel\n HV Ignition Single Wire Cable Data\n P/N HT-CAB-5 Type FZ-LSi, OD 7 mm, 15kV, wire 1.0 mm2, operating temperature -50°C to 180°C\n P/N HT-CAB-5-CEX Type FZ-LSlekw, shielded, OD 8 mm, 15kV, wire 1.0 mm2, operating temperature\n -50°C to 180°C\n P/N HT-CAB-5 and HT-CAB-5-CEX Weight 0.37 kg and 0.42 kg\n (5 m working length)\n\n\n\n\nFor more information, please contact your local Fireye Distributor.\nfireye.com\nMF-00-2-0080-0-035-B (2024/08)\nAll trademarks and service marks referred herein are property of their respective owners.\n©2024 Fireye. All Rights Reserved.\n\n Join us on"}]