FLOWSERVE 68 Mechanical Shaft Seal
The FLOWSERVE Mechanical Shaft Seal, type designation 68, is a single-spring mechanical seal with a carbon ring and Buna gasket. It features a 5/8-inch shaft diameter, 0.27-inch working length, and 18-8 spring…
SKU 3G-OTH-96041
Also listed as: 6806282 · 68 062 82
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
Compliance & shipping
- Hazardous material
- Not classified as hazardous
- California Prop 65 warning
- Warning appliesProp 65 warning
- Licence required
- No licence required
- Safety Data Sheet
- Not available
- Special shipping
- Ships under standard freight
Need installation or engineering help?
Ask a question
Product Description
The FLOWSERVE Mechanical Shaft Seal, type designation 68, is a single-spring mechanical seal with a carbon ring and Buna gasket. It features a 5/8-inch shaft diameter, 0.27-inch working length, and 18-8 spring material (MPN 68-062-82).
Frequently Asked Questions
What is the FLOWSERVE 68 mechanical seal used for?
The FLOWSERVE 68 mechanical shaft seal is used in industrial pumps and rotating equipment to prevent fluid leakage along the shaft. It is suitable for water, light chemicals, and general process applications where a single-spring, carbon-versus-ceramic or carbon-versus-tungsten-carbide face combination is specified.
What are the specifications of the FLOWSERVE 68-062-82 mechanical seal?
The FLOWSERVE 68-062-82 mechanical seal has a 5/8-inch shaft diameter, 0.27-inch working length, single-spring design, carbon ring, Buna gasket, and 18-8 spring material. It is type designation 68 and manufactured by FLOWSERVE. These specs ensure compatibility with standard pump stuffing boxes.
Where to buy the FLOWSERVE 68 mechanical seal worldwide?
3G Electric supplies the FLOWSERVE 68 mechanical seal worldwide. As a global industrial distributor, we handle full logistics, customs clearance, and delivery to your site. Contact us for availability and lead time. We source genuine FLOWSERVE components for international buyers.
How to install a FLOWSERVE 68 mechanical seal?
To install a FLOWSERVE 68 mechanical seal, ensure the shaft and stuffing box are clean and free of burrs. Lubricate the Buna gasket and carbon face lightly with the pumped fluid. Slide the seal onto the shaft until the working length of 0.27 inches is set. Tighten the set screws evenly and rotate the shaft by hand to check for free movement.
Used in
Common applications for FLOWSERVEFLOWSERVE Products
3G Electric supplies FLOWSERVE mechanical shaft seals. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
