GRUVLOK Flex Bolted Clamp Coupling

Gruvlok® Couplings Flexible Coupling Material Specifications (Continued) Fig. 7001 Housing Ductile Iron conforming to ASTM A536, Grade 65-45-12 Coatings Rust inhibiting paint Color: Orange (standard) Hot Dipped Zinc Galvanized (optional) Gaskets Properties as designated in accordance with ASTM D2000 Grade “EP” EPDM (Green and Red color code) -40°F to 250°F (Service Temperature Range) (-40°C to 121°C) Recommended for water service, diluted acids, alkalies solutions, oil-free air and many other chemical services. NOT FOR USE IN PETROLEUM APPLICATIONS. For hot water applications the use of Gruvlok Extreme Temperature lubricant is recommended. NSF-61 Certified for cold and hot water applications up through 12". Grade “T” Nitrile (Orange color code) -20°F to 180°F (Service Temperature Range) (-29°C to 82°C) Recommended for petroleum applications. Air with oil vapors and vegetable and mineral oils. NOT FOR USE IN HOT WATER OR HOT AIR Grade “O” Fluoro-Elastomer (Blue color code) Size Range: 1" - 12" (C style only) 20°F to 300°F (Service Temperature Range) (-7°C to 149°C) Recommended for high temperature resistance to oxidizing acids, petroleum oils, hydraulic fluids, halogenated hydrocarbons and lubricants. Grade “L” Silicone (Red color code) The Gruvlok Fig. 7001 Coupling forms a flexible grooved end pipe joint connection Size Range: 1" - 12" (C style only) with the versatility for a wide range of applications. Services include mechanical and -40°F to 350°F (Service Temperature Range) (-40°C to 177°C) plumbing, process piping, mining and oil field piping, and many others. The coupling Recommended for dry, hot air and some high design supplies optimum strength for working pressures to 1000 PSl (69 bar) without temperature chemical services. Contact an excessive casting weight. ASC Engineered Solutions Representative for availability. Gasket Type The flexible design eases pipe and equipment installation while providing the C Style (1" - 30") designed-in benefit of reducing pipeline noise and vibration transmission without Flush Gap (1" - 24") the addition of special components. To ease coupling handling and assembly and Lubrication to assure consistent quality, sizes 1" through 14" couplings have two 180° segment Standard Gruvlok Xtreme (Do Not use with Grade “L”) housings, 16" have three 120˚ segment housings, and 18" through 24" sizes have four 90° segment housings, while the 28" O.D. and 30" O.D. couplings have six 60° Working Pressure, End Load, Pipe End Separation & Deflection From Center Line segment housings. The 28" O.D. and 30" O.D. are weld-ring couplings. Based on standard wall steel pipe with cut or roll grooves in accordance with Gruvlok specifications. See technical data For Listings/Approval Details and Limitations, visit our website at www.asc-es.com or contact an section for design factors. ASC Engineered Solutions™ Sales Representative. Material Specifications Hardware Kits 304 Stainless Steel (available in sizes up to ¾") Bolts  Kit includes: SAE J429, Grade 5, Zinc Electroplated • (2) Bolts per ASTM A193, Grade B8 Fig. 7001 with Standard Fig. 7001 with Flush Gap Gasket ISO 898-1, Class 8.8, Zinc Electroplated • (2) Heavy Hex Nuts per ASTM A194, Grade 8 Gap Gasket followed by a Yellow Chromate Dip EcoGuard (available in sizes up to ¾") Heavy Hex Nuts Kit includes: ASTM A563, Grade A, Zinc Electroplated • (2) Bolts per SAE J429, Grade 5, with EcoGuard corrosion-resistant zinc flake coating ISO 898-2, Class 8.8, Zinc Electroplated • (2) Heavy Hex Nuts per ASTM A563, Grade A, followed by a Yellow Chromate Dip EcoGuard corrosion-resistant zinc flake coating PROJECT INFORMATION APPROVAL STAMP Project: Approved Address: Approved as noted Contractor: Not approved Engineer: Remarks: Submittal Date: Notes 1: Notes 2: PS-12.20 page 1 PS-SUB-7001-v06 20241011 Gruvlok® Couplings Flexible Coupling Fig. 7001 Sizes 1" - 14" Sizes 16" - 24" Sizes 28" - 30" Max. Max. Nominal Nominal Working Working Max. Range of Deflection from CL Coupling Dimensions Bolt Dimensions Approx. Size O.D. Pressure on Pressure on End Pipe End Wt. Ea. Sched.40 Sched.10 Load Separation Angular Linear X Y Z Size Qty. In./DN(mm) In./mm PSI/bar PSI/bar Lbs./kN In./mm Degrees In./Ft-mm/m In./mm In./mm In./mm In./mm Lbs./kg 1 1.315 1000 750 1,358 0 - 0.13 2.73 0.57 2 1/2 4 1/2 1 7/8 2 3/8 x 2 1/4 1.3 25 33.4 68.9 51.7 6.04 0 - 3.18 47.6 64 114 48 M10 x 57 0.6 1 1/4 1.660 1000 750 2,164 0 - 0.13 2.17 0.45 2 3/4 4 1/2 1 7/8 2 3/8 x 2 1/4 1.4 32 42.2 68.9 51.7 9.63 0 - 3.18 37.6 70 114 48 M10 x 57 0.6 1 1/2 1.900 1000 750 2,835 0 - 0.13 1.90 0.40 3 4 5/8 1 7/8 2 3/8 x 2 1/4 1.5 40 48.3 68.9 51.7 12.61 0 - 3.18 33.0 76 117 48 M10 x 57 0.7 2 2.375 1000 750 4,430 0 - 0.13 1.50 0.31 3 5/8 6 1/8…