HUBBELL WIRING DEVICE-KELLEMS Ceiling-Mount PIR Occupancy Sensor
The HUBBELL WIRING DEVICE-KELLEMS Occupancy Sensor is a ceiling-mount, passive infrared (PIR) sensor designed for incandescent loads. It is hard wired and operates on 120 to 277V AC, with a maximum load rating of…
SKU 3G-OTH-419412
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The HUBBELL WIRING DEVICE-KELLEMS Occupancy Sensor is a ceiling-mount, passive infrared (PIR) sensor designed for incandescent loads. It is hard wired and operates on 120 to 277V AC, with a maximum load rating of 1,800W (Incandescent). This Hubbell product (MPN ATD2000CL) provides occupancy-based control for commercial or industrial spaces.
Frequently Asked Questions
What is the HUBBELL WIRING DEVICE-KELLEMS Occupancy Sensor ATD2000CL used for?
The HUBBELL WIRING DEVICE-KELLEMS Occupancy Sensor ATD2000CL is a ceiling-mount passive infrared (PIR) sensor used to automatically control incandescent lighting based on occupancy. It is designed for commercial or industrial spaces where energy savings and hands-free lighting control are needed.
What are the specifications of the HUBBELL WIRING DEVICE-KELLEMS Occupancy Sensor ATD2000CL?
The HUBBELL WIRING DEVICE-KELLEMS Occupancy Sensor ATD2000CL is hard wired, operates on 120 to 277V AC, and supports a maximum incandescent load of 1,800W. It uses passive infrared (PIR) technology for detection and is a ceiling-mount model from Hubbell.
Where to buy the HUBBELL WIRING DEVICE-KELLEMS Occupancy Sensor ATD2000CL worldwide?
You can source the HUBBELL WIRING DEVICE-KELLEMS Occupancy Sensor ATD2000CL through 3G Electric, a global industrial equipment distributor. We handle full logistics, customs clearance, and delivery to worldwide destinations, ensuring the Hubbell sensor reaches your facility reliably.
How to install the HUBBELL WIRING DEVICE-KELLEMS Occupancy Sensor ATD2000CL?
Install the HUBBELL WIRING DEVICE-KELLEMS Occupancy Sensor ATD2000CL by first turning off power at the breaker. Mount the sensor to a ceiling junction box, connect the hard-wired leads to line, neutral, and load per the wiring diagram, then restore power and adjust sensitivity and time-delay settings as needed.
Used in
Common applications for HUBBELL WIRING DEVICE-KELLEMSHUBBELL WIRING DEVICE-KELLEMS Products
3G Electric supplies HUBBELL WIRING DEVICE-KELLEMS ceiling-mount occupancy sensors. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.
