HUBBELL WIRING DEVICE-KELLEMS 90° Plastic Cable Grip
The Hubbell Wiring Device-Kellems NHC1021CR is a 90° plastic cable grip liquid-tight cord connector with a 1/2 in MNPT box connection, accepting cord diameters from 0.19 in to 0.25 in. Its gray nylon body and red…
SKU 3G-OTH-733230
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The Hubbell Wiring Device-Kellems NHC1021CR is a 90° plastic cable grip liquid-tight cord connector with a 1/2 in MNPT box connection, accepting cord diameters from 0.19 in to 0.25 in. Its gray nylon body and red grommet provide IP66-rated protection, and it carries a Class III, Division 1 & 2 hazardous location rating.
Frequently Asked Questions
What is the Hubbell NHC1021CR liquid tight cord connector used for?
The Hubbell NHC1021CR is a 90° nylon cord connector used to seal and strain-relieve cables entering electrical enclosures in industrial environments. It is rated IP66 for dust and water ingress protection and carries a Class III, Division 1 & 2 hazardous location rating, making it suitable for textile mills and similar applications.
What are the specifications of the Hubbell NHC1021CR?
The Hubbell NHC1021CR has a 1/2 in MNPT box connection, accepts cord diameters from 0.19 in to 0.25 in, and features a gray nylon body with a red grommet. It is rated IP66 and Class III, Division 1 & 2 for hazardous locations. Connection orientation is 90 degrees.
Where to buy the Hubbell NHC1021CR worldwide?
3G Electric supplies the Hubbell NHC1021CR liquid tight cord connector to customers worldwide. As a global industrial solutions provider, we handle full logistics, customs clearance, and delivery to your site. Contact us for pricing and lead time on this part.
How to install a liquid tight cord connector like the Hubbell NHC1021CR?
To install the Hubbell NHC1021CR, thread the 1/2 in MNPT end into a compatible knockout or hub on an enclosure. Insert the cable through the connector, tighten the compression nut to compress the grommet around the cord, and ensure the seal is snug to maintain the IP66 rating. Follow manufacturer torque guidelines.
Used in
Common applications for HUBBELL WIRING DEVICE-KELLEMSHUBBELL WIRING DEVICE-KELLEMS Products
3G Electric supplies HUBBELL WIRING DEVICE-KELLEMS 90° plastic cable grips. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.