HUBBELL WIRING DEVICE-KELLEMS 90° Plastic Cable Grip
The HUBBELL WIRING DEVICE-KELLEMS Liquid Tight Cord Connector is a 90° Plastic Cable Grip with a 1/2 in MNPT box connection, accommodating cord diameters from 0.25 in to 0.38 in. Its nylon body (gray) and white…
SKU 3G-OTH-733233
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
Need installation or engineering help?
Ask a question
Product Description
The HUBBELL WIRING DEVICE-KELLEMS Liquid Tight Cord Connector is a 90° Plastic Cable Grip with a 1/2 in MNPT box connection, accommodating cord diameters from 0.25 in to 0.38 in. Its nylon body (gray) and white grommet deliver an IP66 rating and a Class III, Division 1 & 2 hazardous location rating.
Frequently Asked Questions
What is the HUBBELL WIRING DEVICE-KELLEMS NHC1022CR liquid tight cord connector used for?
The NHC1022CR is a 90° nylon cable grip used to seal and strain-relieve electrical cables entering junction boxes in industrial environments. Its IP66 rating and Class III, Division 1 & 2 hazardous location rating make it suitable for textile mills, woodworking plants, and other combustible-fiber areas.
What are the specifications of the HUBBELL WIRING DEVICE-KELLEMS NHC1022CR?
This connector has a 1/2 in MNPT box connection, accepts cord diameters from 0.25 in to 0.38 in, and is made of gray nylon with a white grommet. It is rated IP66 and Class III, Division 1 & 2 for hazardous locations. The connection orientation is 90 degrees.
Where to buy the HUBBELL WIRING DEVICE-KELLEMS NHC1022CR worldwide?
3G Electric supplies the HUBBELL WIRING DEVICE-KELLEMS NHC1022CR liquid tight cord connector to customers worldwide. We handle full logistics, customs clearance, and delivery to your site. Contact us for pricing and lead time on this nylon cable grip.
How to install the HUBBELL WIRING DEVICE-KELLEMS NHC1022CR cord connector?
Thread the 1/2 in MNPT end into a matching box knockout, tighten the locknut inside the box, then insert the cable through the connector body and tighten the compression nut to seal around the cord. Ensure the grommet matches the cord diameter range of 0.25 in to 0.38 in for a proper IP66 seal.
Used in
Common applications for HUBBELL WIRING DEVICE-KELLEMSHUBBELL WIRING DEVICE-KELLEMS Products
3G Electric supplies HUBBELL WIRING DEVICE-KELLEMS 90° plastic cable grips. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.