HUBBELL WIRING DEVICE-KELLEMS PB3FEBCA 90 Degree Flat Elbow for
The HUBBELL WIRING DEVICE-KELLEMS Flat Elbow Base and Cover is a 90 Degree Flat Elbow for Multichannel Raceways, part of the BaseTrak PB3 series. This non-metallic component in Office White is designed for use with…
SKU 3G-OTH-54298
Local availability & support — Singapore
- Local office
- 20 Woodlands Link #09-05, Singapore 738733
- Phone
- +65 8878 8355
- Delivery
- Same-day or next-business-day delivery within Singapore for in-stock items; 7–14 days for factory-order parts from Europe.
- Payment
- Invoicing in SGD. PayNow, bank transfer, and corporate PO accepted.
- Ships to
- Singapore
Need installation or engineering help?
Ask a question
Product Description
The HUBBELL WIRING DEVICE-KELLEMS Flat Elbow Base and Cover is a 90 Degree Flat Elbow for Multichannel Raceways, part of the BaseTrak PB3 series. This non-metallic component in Office White is designed for use with Base-Trak Raceways and measures 4 1/2 inches in width and 1 3/4 inches in height (MPN PB3FEBCA).
Frequently Asked Questions
What is the HUBBELL WIRING DEVICE-KELLEMS Flat Elbow Base and Cover used for?
The HUBBELL WIRING DEVICE-KELLEMS Flat Elbow Base and Cover is a 90-degree fitting for BaseTrak PB3 multichannel raceways. It routes cables around corners in commercial or industrial power and data distribution systems, maintaining a clean, low-profile installation.
What are the specifications of the HUBBELL WIRING DEVICE-KELLEMS PB3FEBCA?
The PB3FEBCA is a 90-degree flat elbow from the BaseTrak PB3 series. It measures 4 1/2 inches wide and 1 3/4 inches high, made of non-metallic material in Office White. It is designed for use with Base-Trak Raceways and manufactured by HUBBELL WIRING DEVICE-KELLEMS.
Where to buy the HUBBELL WIRING DEVICE-KELLEMS PB3FEBCA worldwide?
3G Electric supplies the HUBBELL WIRING DEVICE-KELLEMS PB3FEBCA worldwide. As a global industrial distributor since 1990, we handle full logistics, customs clearance, and delivery to your site. Contact us for availability and lead time.
How to install the HUBBELL WIRING DEVICE-KELLEMS Flat Elbow Base and Cover?
Install the flat elbow by snapping the base onto the BaseTrak PB3 raceway channel at a 90-degree turn, securing it with screws if required. Route cables through the elbow, then press the cover into place. Always follow local electrical codes and the manufacturer's instructions.
Used in
Common applications for HUBBELL WIRING DEVICE-KELLEMSHUBBELL WIRING DEVICE-KELLEMS Products
3G Electric supplies HUBBELL WIRING DEVICE-KELLEMS 90 degree elbows for multichannel raceways. We supply genuine products with in-stock availability on common SKUs, technical documentation, commissioning support, and warranty service — worldwide.